Preface to the Second Edition. Preface to the First Edition. 1 Introduction. 2 Network Analysis. 2.1 Network Variables. 2.2 Scattering Parameters. 2.3 Short-Circuit Admittance Parameters. 2.4 Open-Circuit Impedance Parameters. 2.5 ABCD Parameters. 2.6 Transmission-Line Networks. 2.7 Network Connections. 2.8 Network Parameter Conversions. 2.9 Symmetrical Network Analysis. 2.10 Multiport Networks. 2.11 Equivalent and Dual Network. 2.12 Multimode Networks. 3 Basic Concepts and Theories of Filters. 3.1 Transfer Functions. 3.2 Lowpass Prototype Filters and Elements. 3.3 Frequency and Element Transformations. 3.4 Immittance Inverters. 3.5 Richards' Transformation and Kuroda Identities. 3.6 Dissipation and Unloaded Quality Factor. 4 Transmission Lines and Components. 4.1 Microstrip Lines. 4.2 Coupled Lines. 4.3 Discontinuities and Components. 4.4 Other Types of Microstrip Lines. 4.5 Coplanar Waveguide (CPW). 4.6 Slotlines. 5 Lowpass and Bandpass Filters. 5.1 Lowpass Filters. 5.2 Bandpass Filters. 6 Highpass and Bandstop Filters. 6.1 Highpass Filters. 6.2 Bandstop Filters. 7 Coupled-Resonator Circuits. 7.1 General Coupling Matrix for Coupled-Resonator Filters. 7.2 General Theory of Couplings. 7.3 General Formulation for Extracting Coupling Coefficient k. 7.4 Formulation for Extracting External Quality Factor Qe. 7.5 Numerical Examples. 7.6 General Coupling Matrix Including Source and Load. 8 CAD for Low-Cost and High-Volume Production. 8.1 Computer-Aided Design (CAD) Tools. 8.2 Computer-Aided Analysis (CAA). 8.3 Filter Synthesis by Optimization. 8.4 CAD Examples. 9 Advanced RF/Microwave Filters. 9.1 Selective Filters with a Single Pair of Transmission Zeros. 9.2 Cascaded Quadruplet (CQ) Filters. 9.3 Trisection and Cascaded Trisection (CT) Filters. 9.4 Advanced Filters with Transmission-Line Inserted Inverters. 9.5 Linear-Phase Filters. 9.6 Extracted Pole Filters. 9.7 Canonical Filters. 9.8 Multiband Filters. 10 Compact Filters and Filter Miniaturization. 10.1 Miniature Open-Loop and Hairpin Resonator Filters. 10.2 Slow-Wave Resonator Filters. 10.3 Miniature Dual-Mode Resonator Filters. 10.4 Lumped-Element Filters. 10.5 Miniature Filters Using High Dielectric-Constant Substrates. 10.6 Multilayer Filters. 11 Superconducting Filters. 11.1 High-Temperature Superconducting (HTS) Materials. 11.2 HTS Filters for Mobile Communications. 11.3 HTS Filters for Satellite Communications. 11.4 HTS Filters for Radio Astronomy and Radar. 11.5 High-Power HTS Filters. 11.6 Cryogenic Package. 12 Ultra-Wideband (UWB) Filters. 12.1 UWB Filters with Short-Circuited Stubs. 12.2 UWB-Coupled Resonator Filters. 12.3 Quasilumped Element UWB Filters. 12.4 UWB Filters Using Cascaded Miniature High- And Lowpass Filters. 12.5 UWB Filters with Notch Band(s). 13 Tunable and Reconfigurable Filters. 13.1 Tunable Combline Filters. 13.2 Tunable Open-Loop Filters without Via-Hole Grounding. 13.3 Reconfigurable Dual-Mode Bandpass Filters. 13.4 Wideband Filters with Reconfigurable Bandwidth. 13.5 Reconfigurable UWB Filters. 13.6 RF MEMS Reconfigurable Filters. 13.7 Piezoelectric Transducer Tunable Filters. 13.8 Ferroelectric Tunable Filters. Appendix: Useful Constants and Data. A.1 Physical Constants. A.2 Conductivity of Metals at 25 C (298K). A.3 Electical Resistivity rho in 10-8 m of Metals. A.4 Properties of Dielectric Substrates. Index.

Microstrip filters for RF/microwave applications

A new type of metallic electromagnetic structure has been developed that is characterized by having high surface impedance. Although it is made of continuous metal, and conducts dc currents, it does not conduct ac currents within a forbidden frequency band. Unlike normal conductors, this new surface does not support propagating surface waves, and its image currents are not phase reversed. The geometry is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements, and distributed in a two-dimensional lattice. The surface can be described using solid-state band theory concepts, even though the periodicity is much less than the free-space wavelength. This unique material is applicable to a variety of electromagnetic problems, including new kinds of low-profile antennas.

/pdf/high-impedance-electromagnetic-surfaces-with-a-forbidden-3vtu72a5an.pdf

High-impedance electromagnetic surfaces with a forbidden frequency band

The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

http://ieeexplore.ieee.org/iel5/6354/16969/00781867.pdf

Photonic crystals

A new defected ground structure (DGS) for the microstrip line is proposed in this paper. The proposed DGS unit structure can provide the bandgap characteristic in some frequency bands with only one or more unit lattices. The equivalent circuit for the proposed defected ground unit structure is derived by means of three-dimensional field analysis methods. The equivalent-circuit parameters are extracted by using a simple circuit analysis method. By employing the extracted parameters and circuit analysis theory, the bandgap effect for the provided defected ground unit structure can be explained. By using the derived and extracted equivalent circuit and parameters, the low-pass filters are designed and implemented. The experimental results show excellent agreement with theoretical results and the validity of the modeling method for the proposed defected ground unit structure.

A design of the low-pass filter using the novel microstrip defected ground structure

Metasurfaces: From microwaves to visible

This paper presents a novel photonic bandgap (PBG) structure for microwave integrated circuits. This new PBG structure is a two-dimensional square lattice with each element consisting of a metal pad and four connecting branches. Experimental results of a microstrip on a substrate with the PEG ground plane displays a broad stopband, as predicted by finite-difference time-domain simulations. Due to the slow-wave effect generated by this unique structure, the period of the PBG lattice is only 0.1/spl lambda//sub 0/ at the cutoff frequency, resulting in the most compact PEG lattice ever achieved. In the passband, the measured slow-wave factor (/spl beta//k/sub 0/) is 1.2-2.4 times higher and insertion loss is at the same level compared to a conventional 50-/spl Omega/ line. This uniplanar compact PBG (UC-PBG) structure can be built using standard planar fabrication techniques without any modification. Several application examples have also been demonstrated, including a nonleaky conductor-backed coplanar waveguide and a compact spurious-free bandpass filter. This UC-PBG structure should find wide applications for high-performance and compact circuit components in microwave and millimeter-wave integrated circuits.

A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit

A new two-dimensional (2-D) photonic bandgap (PBG) structure for microstrip lines is proposed, in which a periodic 2-D pattern consisting of circles is etched in the ground plane of microstrip line. No drilling through the substrate is required. Three PBG circuits were fabricated with different circle radii to determine the optimum dimensions, as well as a PBG circuit with the compensated right-angle microstrip bend. Measurements show that deep and wide stopbands can be achieved using this method.

Novel 2-D photonic bandgap structure for microstrip lines

A novel broadband planar antenna based on the classic Yagi-Uda dipole array is presented. This "quasi-Yagi" antenna achieves a measured 48% bandwidth for VSWR <2, better than 12 dB front-to-back ratio, smaller than -15 dB cross polarization, 3-5 dB absolute gain and a nominal efficiency of 93% across the operating bandwidth. Finite-difference time-domain simulation is used for optimization of the antenna and the results agree very well with measurements. Additionally, a gain-enhanced design is presented, where higher gain has been achieved at the cost of reduced bandwidth. These quasi-Yagi antennas are realized on a high dielectric constant substrate and are completely compatible with microstrip circuitry and solid-state devices. The excellent radiation properties of this antenna make it ideal as either a stand-alone antenna with a broad pattern or as an array element. The antenna should find wide applications in wireless communication systems, power combining, phased arrays and active arrays, as well as millimeter-wave imaging arrays.

A broadband planar quasi-Yagi antenna

A novel waveguide using a photonic bandgap (PBG) structure is presented. The PBG structure is a two-dimensional square lattice with each cell consisting of metal pads and four connecting lines, which are etched on a conductor-backed Duroid substrate. This uniplanar compact PBG structure realizes a magnetic surface in the stopband and is used in the waveguide walls to provide magnetic boundary conditions. A relatively uniform field distribution along the cross section has been measured at frequencies from 9.4 to 10.4 GHz. Phase velocities close to the speed of light have also been observed in the stopband, indicating that TEM mode has been established. A recently developed quasi-Yagi antenna has been employed as a broad-band and efficient waveguide transition. Meanwhile, full-wave simulations using the finite-difference time-domain method provide accurate predictions for the characteristics of both the perfect magnetic conductor impedance surface and the waveguide structure. This novel waveguide structure should find a wide range of applications in different areas, including quasi-optical power combining and the electromagnetic compatibility testing.

/pdf/a-novel-tem-waveguide-using-uniplanar-compact-photonic-504lfkl5x8.pdf

Yongxi Qian

Papers

A design of the low-pass filter using the novel microstrip defected ground structure

A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit

Novel 2-D photonic bandgap structure for microstrip lines

A broadband planar quasi-Yagi antenna

A novel TEM waveguide using uniplanar compact photonic-bandgap (UC-PBG) structure