Younan Xia

Bio: Younan Xia is an academic researcher from The Wallace H. Coulter Department of Biomedical Engineering. The author has contributed to research in topics: Nanocages & Nanowire. The author has an hindex of 216, co-authored 943 publications receiving 175757 citations. Previous affiliations of Younan Xia include Washington University in St. Louis & University of Texas at Dallas.

Shape-controlled metal nanocrystals for catalytic applications

Abstract: The implication of shape control in nanocrystal synthesis goes far beyond aesthetic appeal. For metal nanocrystals, the shape not only determines their physicochemical properties but also their technological relevance for catalytic, plasmonic, photonic, and electronic applications. In particular, heterogeneous catalysis is a field that can benefit tremendously from the availability of metal nanocrystals with well-controlled shapes, which may serve to significantly increase reaction efficiency while decreasing material cost. This article provides a brief overview of our recent progress in generating shape-controlled nanocrystals with enhanced catalytic activity toward oxygen reduction and formic acid oxidation, two reactions that are crucial for the successful commercialization of fuel cell technology. The impact on other industrially important reactions will be discussed as well. We hope that this article provides a roadmap for further development of metal nanocrystal-based catalysts with enhanced performance through shape-controlled synthesis.

Non‐Invasive and In Situ Characterization of the Degradation of Biomaterial Scaffolds by Volumetric Photoacoustic Microscopy

Abstract: Degradation is among the most important properties of biomaterial scaffolds, which are indispensable for regenerative medicine. The currently used method relies on the measurement of mass loss across different samples and cannot track the degradation of an individual scaffold in situ. Here we report, for the first time, the use of multiscale photoacoustic microscopy to non-invasively monitor the degradation of an individual scaffold. We could observe alterations to the morphology and structure of a scaffold at high spatial resolution and deep penetration, and more significantly, quantify the degradation of an individual scaffold as a function of time, both in vitro and in vivo. In addition, the remodeling of vasculature inside a scaffold can be visualized simultaneously using a dual-wavelength scanning mode in a label-free manner. This optoacoustic method can be used to monitor the degradation of individual scaffolds, offering a new approach to non-invasively analyze and quantify biomaterial–tissue interactions in conjunction with the assessment of in vivo vascular parameters.

Aqueous-phase synthesis of single-crystal Pd seeds 3 nm in diameter and their use for the growth of Pd nanocrystals with different shapes.

Abstract: This article describes an aqueous method for the synthesis of Pd seeds with a single-crystal structure and a uniform diameter of 3 nm and their use for the growth of Pd nanocrystals with a variety of shapes. We have also investigated the effects of a number of parameters, including the temperature, reducing power of the reductant, and capping agent on the reduction rate of a Pd precursor, and thus the final size, size distribution, and morphology of the Pd seeds. By taking advantage of the coordination effect of Br(-) ions with Pd(2+) ions and their selective adsorption on the Pd(100) surface, Pd nanocrystals with a number of distinct shapes could be conveniently produced by varying the concentration of KBr added into the growth solution. This work provides a general and facile method for the green synthesis of Pd nanocrystals with controlled shapes, especially for the preparation of Pd nanocrystals with sizes in the sub-10 nm regime.

Simple and accurate methods for quantifying deformation, disruption, and development in biological tissues

Abstract: When mechanical factors underlie growth, development, disease or healing, they often function through local regions of tissue where deformation is highly concentrated. Current optical techniques to estimate deformation can lack precision and accuracy in such regions due to challenges in distinguishing a region of concentrated deformation from an error in displacement tracking. Here, we present a simple and general technique for improving the accuracy and precision of strain estimation and an associated technique for distinguishing a concentrated deformation from a tracking error. The strain estimation technique improves accuracy relative to other state-of-the-art algorithms by directly estimating strain fields without first estimating displacements, resulting in a very simple method and low computational cost. The technique for identifying local elevation of strain enables for the first time the successful identification of the onset and consequences of local strain concentrating features such as cracks and tears in a highly strained tissue. We apply these new techniques to demonstrate a novel hypothesis in prenatal wound healing. More generally, the analytical methods we have developed provide a simple tool for quantifying the appearance and magnitude of localized deformation from a series of digital images across a broad range of disciplines.

Formation of Embryoid Bodies with Controlled Sizes and Maintained Pluripotency in Three‐Dimensional Inverse Opal Scaffolds

Abstract: Embryoid bodies (EBs) are aggregates of cells derived from embryonic stem (ES) cells, which can serve as a good model system to investigate molecular and cellular interactions in the earliest stages of embryo development. Current methods for producing EBs mainly rely on the use of hanging drops or suspensions in non-tissue culture treated plates, microwells, and spinner flasks. The capability of these methods is limited in terms of size uniformity and distribution as well as scalability. Here, a new platform based on three-dimensional alginate inverse opal scaffolds with uniform pores is presented, where uniform EBs with controllable sizes could be produced in the pores and then recovered after disintegration of the scaffolds. The size of the EBs could be readily controlled by varying the culture time and/or by using scaffolds with different pore sizes. The EBs maintained their viability and undifferentiated state, and they were able to differentiate into specific lineages upon stimulation.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346