Younan Xia

Bio: Younan Xia is an academic researcher from The Wallace H. Coulter Department of Biomedical Engineering. The author has contributed to research in topics: Nanocages & Nanowire. The author has an hindex of 216, co-authored 943 publications receiving 175757 citations. Previous affiliations of Younan Xia include Washington University in St. Louis & University of Texas at Dallas.

Polyol Synthesis of Platinum Nanoparticles: Control of Morphology with Sodium Nitrate

Abstract: Morphological control over platinum nanoparticles was realized by varying the amount of NaNO3 added to a polyol process, where H2PtCl6 was reduced by ethylene glycol to form PtCl42- and Pt0 at 160 °C. As the molar ratio between NaNO3 and H2PtCl6 was increased from 0 to 11, the morphology of Pt nanoparticles evolved from irregular spheroids with rounded profiles to tetrahedra and octahedra with well-defined facets. Absorption spectroscopy studies suggest that nitrate was reduced to nitrite by PtCl42- in the early stage of the synthesis, and the nitrite could then form stable complexes with both Pt(II) and Pt(IV) species. As a result, the reduction of Pt precursors by ethylene glycol was greatly slowed. This change in reaction kinetics altered the growth rates associated with different crystallographic directions of the Pt nanocrystals and ultimately led to the formation of different morphologies.

Synthesis of Pd−Pt Bimetallic Nanocrystals with a Concave Structure through a Bromide-Induced Galvanic Replacement Reaction

Abstract: This article describes a systematic study of the galvanic replacement reaction between PtCl62− ions and Pd nanocrystals with different shapes, including cubes, cuboctahedrons, and octahedrons. It was found that Br− ions played an important role in initiating, facilitating, and directing the replacement reaction. The presence of Br− ions led to the selective initiation of galvanic replacement from the {100} facets of Pd nanocrystals, likely due to the preferential adsorption of Br− ions on this crystallographic plane. The site-selective galvanic replacement resulted in the formation of Pd−Pt bimetallic nanocrystals with a concave structure owing to simultaneous dissolution of Pd atoms from the {100} facets and deposition of the resultant Pt atoms on the {111} facets. The Pd−Pt concave nanocubes with different weight percentages of Pt at 3.4, 10.4, 19.9, and 34.4 were also evaluated as electrocatalysts for the oxygen reduction reaction (ORR). Significantly, the sample with a 3.4 wt.% of Pt exhibited the lar...

Noble‐Metal Nanocrystals with Concave Surfaces: Synthesis and Applications

Abstract: Metal nanocrystals with concave surfaces are interesting for a wide variety of applications that are related to catalysis, plasmonics, and surface-enhanced spectroscopy. This interest arises from their high-index facets, surface cavities, and sharp corners/edges. Two major challenges are associated with this novel class of nanocrystals: 1) how to generate a concave surface with negative curvature, which is not favored by thermodynamics owing to its higher energy than the convex counterpart; and 2) how to stabilize the morphology of a nanocrystal with concave structures on the surface. Recently, a number of different procedures have been developed for the synthesis of noble-metal nanocrystals with concave surfaces. This Review provides a brief account of these developments, with the aim of offering new insights into the growth mechanisms. We focus on methods based on two general strategies: 1) site-specific dissolution through etching and galvanic replacement; and 2) directionally controlled overgrowth by facet-selective capping, kinetic control, and template-directed epitaxy. Their enhanced catalytic and electrocatalytic properties are also described.

Controlling the Shapes of Silver Nanocrystals with Different Capping Agents

Abstract: This paper provides direct evidence to support the role of a capping agent in controlling the evolution of Ag seeds into nanocrystals with different shapes. Starting with single-crystal seeds (spherical or cubic in shape), we could selectively obtain Ag octahedrons enclosed by {111} facets and nanocubes/nanobars enclosed by {100} facets by adding sodium citrate (Na(3)CA) and poly(vinyl pyrrolidone) (PVP), respectively, as a capping agent while all other parameters were kept the same. This research not only offers new insights into the role played by a capping agent in shape-controlled synthesis but also provides, for the first time, Ag octahedrons as small as 40 nm in edge length for optical and spectroscopic studies.

Photoacoustic tomography of a rat cerebral cortex in vivo with au nanocages as an optical contrast agent.

Abstract: Poly(ethylene glycol)-coated Au nanocages have been evaluated as a potential near-infrared (NIR) contrast agent for photoacoustic tomography (PAT). Previously, Au nanoshells were found to be an effective NIR contrast agent for PAT; however, Au nanocages with their more compact sizes ( 100 nm for Au nanoshells) and larger optical absorption cross sections should be better suited for in vivo applications. We sequentially injected Au nanocages into the circulatory system of a rat in three administrations and in vivo PAT was conducted immediately prior to the first injection and continued until 5 h after the final injection. A gradual enhancement of the optical absorption in the cerebral cortex, by up to 81%, was observed over the course of the experiment.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346