Younan Xia

Bio: Younan Xia is an academic researcher from The Wallace H. Coulter Department of Biomedical Engineering. The author has contributed to research in topics: Nanocages & Nanowire. The author has an hindex of 216, co-authored 943 publications receiving 175757 citations. Previous affiliations of Younan Xia include Washington University in St. Louis & University of Texas at Dallas.

Toward continuous and scalable production of colloidal nanocrystals by switching from batch to droplet reactors

Abstract: Colloidal nanocrystals are finding widespread use in a wide variety of applications ranging from catalysis to photonics, electronics, energy harvesting/conversion/storage, environment protection, information storage, and biomedicine. Despite the large number of successful demonstrations, there still exists a significant gap between academic studies and industrial applications owing to the lack of an ability to produce colloidal nanocrystals in large quantities without losing control over their properties. Droplet reactors have shown great potential for the continuous and scalable production of colloidal nanocrystals with uniform and well-controlled sizes, shapes, structures, and compositions. In this tutorial review, we begin with rationales for the use of droplet reactors as a new platform to scale up the production of colloidal nanocrystals, followed by discussions of the general concepts and technical challenges in applying droplet reactors to the synthesis of nanocrystals, including droplet formation, introduction and mixing of reagents, management of gaseous species, and interfacial adsorption. At the end, we use a set of examples to highlight the unique capabilities of droplet reactors for the high-volume production of colloidal nanocrystals in the setting of both homogeneous nucleation and seed-mediated growth.

Facile synthesis of palladium right bipyramids and their use as seeds for overgrowth and as catalysts for formic acid oxidation.

Abstract: Controlling the shape and thus facets of metal nanocrystals is an effective way to enhance their performance in catalytic reactions. While Pd nanocrystals with a myriad of shapes have been successfully prepared with good uniformity and in high yield, Pd right bipyramids (RBPs) that have a singly twinned structure have been elusive. We report a facile route based on polyol reduction for the synthesis of Pd RBPs with purity >90% and sizes controlled in the range 5-15 nm. The success of our synthesis relies on the use of iodide ions to manipulate the strength of an oxidative etchant and selectively cap the Pd{100} facets. The as-prepared RBPs could serve as seeds to generate a set of Pd nanocrystals with novel shapes and structures. The RBPs also exhibited enhanced catalytic activity toward formic acid oxidation, with a current density 2.5 and 7.1 times higher than those of the single-crystal Pd nanocubes (which were also mainly covered by {100} facets) and commercial Pd black, respectively.

Inverse Opal Scaffolds and Their Biomedical Applications.

Abstract: Three-dimensional porous scaffolds play a pivotal role in tissue engineering and regenerative medicine by functioning as biomimetic substrates to manipulate cellular behaviors. While many techniques have been developed to fabricate porous scaffolds, most of them rely on stochastic processes that typically result in scaffolds with pores uncontrolled in terms of size, structure, and interconnectivity, greatly limiting their use in tissue regeneration. Inverse opal scaffolds, in contrast, possess uniform pores inheriting from the template comprised of a closely packed lattice of monodispersed microspheres. The key parameters of such scaffolds, including architecture, pore structure, porosity, and interconnectivity, can all be made uniform across the same sample and among different samples. In conjunction with a tight control over pore sizes, inverse opal scaffolds have found widespread use in biomedical applications. In this review, we provide a detailed discussion on this new class of advanced materials. After a brief introduction to their history and fabrication, we highlight the unique advantages of inverse opal scaffolds over their non-uniform counterparts. We then showcase their broad applications in tissue engineering and regenerative medicine, followed by a summary and perspective on future directions.

Maneuvering the internal porosity and surface morphology of electrospun polystyrene yarns by controlling the solvent and relative humidity

Abstract: This article presents a simple and reliable method for generating polystyrene (PS) yarns composed of bundles of nanofibrils by using a proper combination of solvent and relative humidity. We elucidated the mechanism responsible for the formation of this new morphology by systematically investigating the molecular interactions among the polymer, solvent(s), and water vapor. We demonstrated that vapor-induced phase separation played a pivotal role in generating the yarns with a unique structure. Furthermore, we discovered that the low vapor pressure of N,N-dimethylformamide (DMF) was critical to the evolution of pores in the interiors. On the contrary, the relatively high vapor pressure of tetrahydrofuran (THF) hindered the formation of interior pores but excelled in creating a rough surface. In all cases, our results clearly indicate that the formation of either internal porosity or surface roughness required the presence of water vapor, a nonsolvent of the polymer, at a proper level of relative humidity. The exact morphology or pore structure was dependent on the speed of evaporation of the solvent(s) (DMF, THF, and their mixtures) as well as the interdiffusion and penetration of the nonsolvent (water) and solvent(s). Our findings can serve as guidelines for the preparation of fibers with desired porosity both internally and externally through electrospinning.

Synthesis of Colloidal Metal Nanocrystals: A Comprehensive Review on the Reductants.

Abstract: There is a growing interest in controlling the synthesis of colloidal metal nanocrystals and thus tailoring their properties toward various applications. In this context, choosing an appropriate combination of reagents (e.g., salt precursor, reductant, capping agent, and stabilizer) plays a pivotal role in enabling the synthesis of metal nanocrystals with diversified sizes, shapes, and structures. Here we present a comprehensive review that highlights one of the key reagents for the synthesis of metal nanocrystals via chemical reduction: the reductants. We start with a brief introduction to the compounds commonly employed as reductants in the colloidal synthesis of metal nanocrystals by showing their oxidation half-reactions and the corresponding oxidation potentials. Then we offer specific examples pertaining to the controlled synthesis of metal nanocrystals, followed by some fundamental aspects covering the general mechanisms of metal ion reduction based on the Marcus Theory. Afterwards, we present a case-by-case discussion on a wide variety of reductants, including their major properties, reduction mechanisms, and additional effects on the final products. We illustrate these aspects by selecting key examples from the literature and paying close attention to the underlying mechanism in each case. At the end, we conclude by summarizing the highlights of the review and providing some perspectives on future directions.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology.

Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346