Younsun Kim

Bio: Younsun Kim is an academic researcher from Samsung. The author has contributed to research in topics: Base station & Communication channel. The author has an hindex of 40, co-authored 203 publications receiving 5659 citations. Previous affiliations of Younsun Kim include Yonsei University & University of Washington.

Ultra-Reliable and Low-Latency Communications in 5G Downlink: Physical Layer Aspects

Abstract: URLLC is a new service category in 5G to accommodate emerging services and applications having stringent latency and reliability requirements. In order to support URLLC, there should be both evolutionary and revolutionary changes in the air interface named 5G NR. In this article, we provide an up-to-date overview of URLLC with an emphasis on the physical layer challenges and solutions in 5G NR downlink. We highlight key requirements of URLLC and then elaborate the physical layer issues and enabling technologies including packet and frame structure, scheduling schemes, and reliability improvement techniques, which have been discussed in the 3GPP Release 15 standardization.

Full-dimension MIMO (FD-MIMO) for next generation cellular technology

Abstract: This article considers a practical implementation of massive MIMO systems [1]. Although the best performance can be achieved when a large number of active antennas are placed only in the horizontal domain, BS form factor limitation often makes horizontal array placement infeasible. To cope with this limitation, this article introduces full-dimension MIMO (FD-MIMO) cellular wireless communication system, where active antennas are placed in a 2D grid at BSs. For analysis of the FD-MIMO systems, a 3D spatial channel model is introduced, on which system-level simulations are conducted. The simulation results show that the proposed FD-MIMO system with 32 antenna ports achieves 2-3.6 times cell average throughput gain and 1.5-5 times cell edge throughput gain compared to the 4G LTE system of two antenna ports at the BS.

Coordinated multipoint transmission and reception in LTE-advanced systems

Abstract: Advanced interference mitigation techniques relying on multipoint coordination have attracted significant attention from the wireless industry and academia in the past few years. In 3GPP LTE-Advanced, a work item on Coordinated Multiple Point transmission and reception (CoMP) was initiated in September 2011, and it is one of the core features of Release 11. The objective of this work item is to provide the necessary specification support to efficiently realize the benefits of cooperative transmission in the downlink and cooperative reception in the uplink. This article discusses the specification support for CoMP and the motivations behind the specific design choices. The deployment scenarios that were considered for the application of CoMP in Release 11 are also presented.

Overview of Full-Dimension MIMO in LTE-Advanced Pro

Abstract: Multiple-input multiple-output (MIMO) systems with a large number of base station antennas, often called massive MIMO, have received much attention in academia and industry as a means to improve the spectral efficiency, energy efficiency, and processing complexity of next generation cellular systems. The mobile communication industry has initiated a feasibility study of massive MIMO systems to meet the increasing demand of future wireless systems. Field trials of the proof-of-concept systems have demonstrated the potential gain of the Full-Dimension MIMO (FD-MIMO), an official name for the MIMO enhancement in the 3rd generation partnership project (3GPP). 3GPP initiated standardization activity for the seamless integration of this technology into current 4G LTE systems. In this article, we provide an overview of FD-MIMO systems, with emphasis on the discussion and debate conducted on the standardization process of Release 13. We present key features for FD-MIMO systems, a summary of the major issues for the standardization and practical system design, and performance evaluations for typical FD-MIMO scenarios.

Method and apparatus for measuring interference in wireless communication system

Abstract: An interference measurement method of a terminal is provided for facilitating downlink transmission in the mobile communication system based on Distributed Antenna System (DAS) in which multiple antennas controlled by a base station are distributed within the service area of the base station. The interference measurement method includes receiving channel measurement information and interference measurement information from a base station, receiving channel state information reference signals, calculating, when the received channel state information reference signal is for channel measurement, a received signal energy based on the channel measurement information and, when the received channel state information reference signal is for interference measurement, an interference based on the interference measurement information, generating channel quality information based on the received signal energy and the interference, and transmitting the channel quality information to the base station.

What Will 5G Be

Abstract: What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

An Overview of Massive MIMO: Benefits and Challenges

Abstract: Massive multiple-input multiple-output (MIMO) wireless communications refers to the idea equipping cellular base stations (BSs) with a very large number of antennas, and has been shown to potentially allow for orders of magnitude improvement in spectral and energy efficiency using relatively simple (linear) processing. In this paper, we present a comprehensive overview of state-of-the-art research on the topic, which has recently attracted considerable attention. We begin with an information theoretic analysis to illustrate the conjectured advantages of massive MIMO, and then we address implementation issues related to channel estimation, detection and precoding schemes. We particularly focus on the potential impact of pilot contamination caused by the use of non-orthogonal pilot sequences by users in adjacent cells. We also analyze the energy efficiency achieved by massive MIMO systems, and demonstrate how the degrees of freedom provided by massive MIMO systems enable efficient single-carrier transmission. Finally, the challenges and opportunities associated with implementing massive MIMO in future wireless communications systems are discussed.

System, method, and computer program product for providing location based services and mobile e-commerce

Abstract: A system, method, apparatus and computer program product for providing location based functions and mobile e-commerce comprising a central processing unit including a processor, a storage device, and programming stored in the storage device, a display device, an audio input device, an audio output device, a communications module, a commerce module, an image module, and a location module. The programming controls the operation of the present invention to provide functions based on location data, to facilitate commercial exchanges by wirelessly exchanging payment and product information with venders, to identify services such as venders meeting selection criteria, to wirelessly exchange select information with other users and systems, to restrict and/or monitor the use of the device based on authorized user parameters, selecting one of a plurality networks through which to communicate, detecting a trigger for performing an action based on a change in location and sensed data, storing a voice annotation with a computer data file, determining service providers and associated communication parameters, contemporaneously maintaining a wireless voice and data link, providing a system for selecting and delivering mobile advertisements, and many other functions and services that are described herein.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

Abstract: There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

Cloud RAN for Mobile Networks—A Technology Overview

Abstract: Cloud Radio Access Network (C-RAN) is a novel mobile network architecture which can address a number of challenges the operators face while trying to support growing end-user's needs. The main idea behind C-RAN is to pool the Baseband Units (BBUs) from multiple base stations into centralized BBU Pool for statistical multiplexing gain, while shifting the burden to the high-speed wireline transmission of In-phase and Quadrature (IQ) data. C-RAN enables energy efficient network operation and possible cost savings on baseband resources. Furthermore, it improves network capacity by performing load balancing and cooperative processing of signals originating from several base stations. This paper surveys the state-of-the-art literature on C-RAN. It can serve as a starting point for anyone willing to understand C-RAN architecture and advance the research on C-RAN.