Yu-Wei Lin

Bio: Yu-Wei Lin is an academic researcher from MediaTek. The author has contributed to research in topics: Orthogonal frequency-division multiplexing & Fast Fourier transform. The author has an hindex of 9, co-authored 10 publications receiving 705 citations. Previous affiliations of Yu-Wei Lin include National Chiao Tung University.

A 1-GS/s FFT/IFFT processor for UWB applications

Abstract: In this paper, we present a novel 128-point FFT/IFFT processor for ultrawideband (UWB) systems. The proposed pipelined FFT architecture, called mixed-radix multipath delay feedback (MRMDF), can provide a higher throughput rate by using the multidata-path scheme. Furthermore, the hardware costs of memory and complex multipliers in MRMDF are only 38.9% and 44.8% of those in the known FFT processor by means of the delay feedback and the data scheduling approaches. The high-radix FFT algorithm is also realized in our processor to reduce the number of complex multiplications. A test chip for the UWB system has been designed and fabricated using 0.18-/spl mu/m single-poly and six-metal CMOS process with a core area of 1.76/spl times/1.76 mm/sup 2/, including an FFT/IFFT processor and a test module. The throughput rate of this fabricated FFT processor is up to 1 Gsample/s while it consumes 175 mW. Power dissipation is 77.6 mW when its throughput rate meets UWB standard in which the FFT throughput rate is 409.6 Msample/s.

Design of an FFT/IFFT Processor for MIMO OFDM Systems

Abstract: In this paper, we present a novel 128/64 point fast Fourier transform (FFT)/ inverse FFT (IFFT) processor for the applications in a multiple-input multiple-output orthogonal frequency-division multiplexing based IEEE 802.11n wireless local area network baseband processor. The unfolding mixed-radix multipath delay feedback FFT architecture is proposed to efficiently deal with multiple data sequences. The proposed processor not only supports the operation of FFT/IFFT in 128 points and 64 points but can also provide different throughput rates for 1-4 simultaneous data sequences to meet IEEE 802.11n requirements. Furthermore, less hardware complexity is needed in our design compared with traditional four-parallel approach. The proposed FFT/IFFT processor is designed in a 0.13-mum single-poly and eight-metal CMOS process. The core area is 660times2142 mum2 , including an FFT/IFFT processor and a test module. At the operation clock rate of 40 MHz, our proposed processor can calculate 128-point FFT with four independent data sequences within 3.2 mus meeting IEEE 802.11n standard requirements

A dynamic scaling FFT processor for DVB-T applications

Abstract: This paper presents an 8192-point FFT processor for DVB-T systems, in which a three-step radix-8 FFT algorithm, a new dynamic scaling approach, and a novel matrix prefetch buffer are exploited. About 64 K bit memory space can be saved in the 8 K point FFT by the proposed dynamic scaling approach. Moreover, with data scheduling and pre-fetched buffering, single-port memory can be adopted without degrading throughput rate. A test chip for 8 K mode DVB-T system has been designed and fabricated using 0.18-/spl mu/m single-poly six-metal CMOS process with core area of 4.84 mm/sup 2/. Power dissipation is about 25.2 mW at 20 MHz.

A 2.4-Gsample/s DVFS FFT Processor for MIMO OFDM Communication Systems

Abstract: This paper presents a new dynamic voltage and frequency scaling (DVFS) FFT processor for MIMO OFDM applications. By the proposed multimode multipath-delay-feedback (MMDF) architecture, our FFT processor can process 1-8-stream 256-point FFTs or a high-speed 256-point FFT in two processing domains at minimum clock frequency for DVFS operations. A parallelized radix-24 FFT algorithm is also employed to save the power consumption and hardware cost of complex multipliers. Furthermore, a novel open-loop voltage detection and scaling (OLVDS) mechanism is proposed for fast and robust voltage management. With these schemes, the proposed FFT processor can operate at adequate voltage/frequency under different configurations to support the power-aware feature. A test chip of the proposed FFT processor has been fabricated using UMC 90 nm single-poly nine-metal CMOS process with a core area of 1.88 times1.88 mm2 . The SQNR performance of this FFT chip is over 35.8 dB for QPSK/16-QAM modulation. Power dissipation of 2.4 Gsample/s 256-point FFT computations is about 119.7 mW at 0.85 V. Depending on the operation mode, power can be saved by 18%-43% with voltage scaling in TT corner.

An Indexed-Scaling Pipelined FFT Processor for OFDM-Based WPAN Applications

Abstract: In this brief, a high-throughput and low-complexity fast Fourier transform (FFT) processor for wideband orthogonal frequency division multiplexing communication systems is presented. A new indexed-scaling method is proposed to reduce both the critical-path delay and hardware cost by employing shorter wordlength. Together with the mixed-radix multipath delay feedback structure, the proposed FFT processor can achieve very high throughput with low hardware cost. From analysis, it is shown that the proposed indexed-scaling method can save at least 11% memory utilizations compared to other state-of-the-art scaling algorithms. Also, a test chip of a 1.2 Gsample/s 2048-point FFT processor has been designed using UMC 90-nm 1P9M process with a core area of 0.97 mm2. The signal-to-quantization-noise ratio (SQNR) performance of this test chip is over 32.7 dB to support 16-QAM modulation and the power consumption is about 117 mW at 300 MHz. Compared to the fixed-point FFT processors, about 26% area and 28% power can be saved under the same throughput and SQNR specifications.

Low density parity check decoder for regular LDPC codes

Abstract: A method and system for decoding low density parity check (“LDPC”) codes. An LDPC decoder includes an R select unit, a Q message first-in first-out (“FIFO”) memory, and a cyclic shifter. The R select unit provides an R message by selecting from a plurality of possible R message values. The Q message memory stores a Q message until an R message is generated by a CNU, the Q message and the R message are combined to provide a P message. The cyclic shifter shifts the P message.

Pipelined Radix- $2^{k}$ Feedforward FFT Architectures

Abstract: The appearance of radix-22 was a milestone in the design of pipelined FFT hardware architectures. Later, radix-22 was extended to radix-2k . However, radix-2k was only proposed for single-path delay feedback (SDF) architectures, but not for feedforward ones, also called multi-path delay commutator (MDC). This paper presents the radix-2k feedforward (MDC) FFT architectures. In feedforward architectures radix-2k can be used for any number of parallel samples which is a power of two. Furthermore, both decimation in frequency (DIF) and decimation in time (DIT) decompositions can be used. In addition to this, the designs can achieve very high throughputs, which makes them suitable for the most demanding applications. Indeed, the proposed radix-2k feedforward architectures require fewer hardware resources than parallel feedback ones, also called multi-path delay feedback (MDF), when several samples in parallel must be processed. As a result, the proposed radix-2k feedforward architectures not only offer an attractive solution for current applications, but also open up a new research line on feedforward structures.

An Efficient 10GBASE-T Ethernet LDPC Decoder Design With Low Error Floors

Abstract: A grouped-parallel low-density parity-check (LDPC) decoder is designed for the (2048,1723) Reed-Solomon-based LDPC (RS-LDPC) suitable for 10GBASE-T Ethernet. A two-step decoding scheme reduces the wordlength to 4 bits while lowering the error floor to below 10-14 BER. The proposed post-processor is conveniently integrated with the decoder, adding minimal area and power. The decoder architecture is optimized by groupings so as to localize irregular interconnects and regularize global interconnects and the overall wiring overhead is minimized. The 5.35 mm2, 65 nm CMOS chip achieves a decoding throughput of 47.7 Gb/s. With scaled frequency and voltage, the chip delivers a 6.67 Gb/s throughput necessary for 10GBASE-T while dissipating 144 mW of power.

Федеральное государственное бюджетное учреждение «Научно-исследовательский институт комплексных проблем сердечно-сосудистых заболеваний» Сибирского отделения Российской академии медицинских наук, Кемерово, Россия

Abstract: Натрийуретические пептиды (НУП) являются важными биомаркерами в диагностике и определении прогноза у пациентов с сердечной недостаточностью (СН). Оценка динамики концентрации НУП (BNP, Nt -proBNP) может быть использована в качестве критерия успешности проводимой терапии. так, при достижении целевых уровней НУП можно прогнозировать благоприятный исход заболевания. В настоящее время лечение СН с учетом уровней НУП является частью рекомендаций по лечению СН (класс IIа) и улучшению ее исхода (класс IIб) в США, однако такой подход не используется в российских клиниках. Цель. Представить современный взгляд на возможность использования НУП для оценки эффективности проводимой терапии пациентов с СН. Ключевые слова: натрийуретические пептиды, сердечная недостаточность, оценка эффективности терапии.

Pipelined Parallel FFT Architectures via Folding Transformation

Abstract: This paper presents a novel approach to develop parallel pipelined architectures for the fast Fourier transform (FFT). A formal procedure for designing FFT architectures using folding transformation and register minimization techniques is proposed. Novel parallel-pipelined architectures for the computation of complex and real valued fast Fourier transform are derived. For complex valued Fourier transform (CFFT), the proposed architecture takes advantage of under utilized hardware in the serial architecture to derive L-parallel architectures without increasing the hardware complexity by a factor of L. The operating frequency of the proposed architecture can be decreased which in turn reduces the power consumption. Further, this paper presents new parallel-pipelined architectures for the computation of real-valued fast Fourier transform (RFFT). The proposed architectures exploit redundancy in the computation of FFT samples to reduce the hardware complexity. A comparison is drawn between the proposed designs and the previous architectures. The power consumption can be reduced up to 37% and 50% in 2-parallel CFFT and RFFT architectures, respectively. The output samples are obtained in a scrambled order in the proposed architectures. Circuits to reorder these scrambled output sequences to a desired order are presented.