scispace - formally typeset
Search or ask a question
Author

Yunchen Du

Other affiliations: Chinese Ministry of Education
Bio: Yunchen Du is an academic researcher from Harbin Institute of Technology. The author has contributed to research in topics: Reflection loss & Catalysis. The author has an hindex of 48, co-authored 134 publications receiving 8396 citations. Previous affiliations of Yunchen Du include Chinese Ministry of Education.


Papers
More filters
Journal ArticleDOI
TL;DR: By considering good chemical homogeneity and microwave absorption, it is believed the as-fabricated Fe3O4@C composites can be promising candidates as highly effective microwave absorbers.
Abstract: Core–shell composites, Fe3O4@C, with 500 nm Fe3O4 microspheres as cores have been successfully prepared through in situ polymerization of phenolic resin on the Fe3O4 surface and subsequent high-temperature carbonization. The thickness of carbon shell, from 20 to 70 nm, can be well controlled by modulating the weight ratio of resorcinol and Fe3O4 microspheres. Carbothermic reduction has not been triggered at present conditions, thus the crystalline phase and magnetic property of Fe3O4 micropsheres can be well preserved during the carbonization process. Although carbon shells display amorphous nature, Raman spectra reveal that the presence of Fe3O4 micropsheres can promote their graphitization degree to a certain extent. Coating Fe3O4 microspheres with carbon shells will not only increase the complex permittivity but also improve characteristic impedance, leading to multiple relaxation processes in these composites, thus the microwave absorption properties of these composites are greatly enhanced. Very inte...

817 citations

Journal ArticleDOI
TL;DR: The residual defects and groups in chemically reduced graphene oxide cannot not only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups' electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption as mentioned in this paper.
Abstract: The residual defects and groups in chemically reduced graphene oxide cannot only improve the impedance match characteristic and prompt energy transition from contiguous states to Fermi level, but also introduce defect polarization relaxation and groups’ electronic dipole relaxation, which are all in favor of electromagnetic wave penetration and absorption The chemically reduced graphene oxide shows enhanced microwave absorption compared with graphite and carbon nanotubes, and can be expected to display better absorption than high quality graphene, exhibiting a promising prospect as microwave absorbing material

728 citations

Journal ArticleDOI
01 Jan 2017-Carbon
TL;DR: In this paper, a uniform core-shell Co@C microspheres are innovatively fabricated through an in situ transformation from Co 3 O 4 @phenolic resin precursor, which can restrain the agglomeration of Co particles during high-temperature treatment, which accounts for the survival of uniform coreshell microstructure.

604 citations

Journal ArticleDOI
TL;DR: In this article, a cubic framework of amorphous carbon and uniformly dispersed core-shell Fe@graphitic carbon nanoparticles is used to construct a high-performance microwave absorber.
Abstract: Composites of magnetic metal nanoparticles and carbon materials are highly desirable for high-performance microwave absorbers due to their compatible dielectric loss and magnetic loss abilities. In this article, novel nanocomposites, Fe/C nanocubes, have been successfully prepared through an in situ route from a metal–organic framework, Prussian blue, by controlled high-temperature pyrolysis. The resultant nanocubes are actually composed of a cubic framework of amorphous carbon and uniformly dispersed core–shell Fe@graphitic carbon nanoparticles. Within the studied pyrolysis temperature range (600–700 °C), the porous structure, iron content, magnetic properties, and graphitization degree of the Fe/C nanocubes can be well modulated. Particularly, the improved carbon graphitization degree, both in amorphous frameworks and graphitic shells, results in enhanced complex permittivity and dielectric loss properties. The homogeneous chemical composition and microstructure stimulate the formation of multiple dielectric resonances by regularizing various polarizations. The synergistic effect of dielectric loss, magnetic loss, matched impedance, and dielectric resonances accounts for the improved microwave absorption properties of the Fe/C nanocubes. The absorption bands of the optimum one obtained at 650 °C are superior to most composites ever reported. By considering the good chemical homogeneity and microwave absorption, we believe that the as-fabricated Fe/C nanocubes will be promising candidates as highly effective microwave absorbers.

545 citations

Journal ArticleDOI
TL;DR: Although PPy@PANI composites herein consume the incident electromagnetic wave by absolute dielectric loss, their performances are still superior or comparable to most PANI-based composites ever reported, indicating that they can be taken as a new kind of promising lightweight microwave absorbers.
Abstract: Highly uniform core–shell composites, polypyrrole@polyaniline (PPy@PANI), have been successfully constructed by directing the polymerization of aniline on the surface of PPy microspheres. The thickness of PANI shells, from 30 to 120 nm, can be well controlled by modulating the weight ratio of aniline and PPy microspheres. PPy microspheres with abundant carbonyl groups have very strong affinity to the conjugated chains of PANI, which is responsible for the spontaneous formation of uniform core–shell microstructures. However, the strong affinity between PPy microspheres and PANI shells does not promote the diffusion or reassembly of two kinds of conjugated chains. Coating PPy microspheres with PANI shells increases the complex permittivity and creates the mechanism of interfacial polarization, where the latter plays an important role in increasing the dielectric loss of PPy@PANI composites. With a proper thickness of PANI shells, the moderate dielectric loss will produce well matched characteristic impedanc...

419 citations


Cited by
More filters
01 Sep 1955
TL;DR: In this paper, the authors restrict their attention to the ferrites and a few other closely related materials, which are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present.
Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

2,659 citations

Journal ArticleDOI
TL;DR: Sulfate radical-based advanced oxidation processes (AOPs) have received increasing attention in recent years due to their high capability and adaptability for the degradation of emerging contaminants as mentioned in this paper.

2,267 citations

Journal ArticleDOI
TL;DR: The most important members of the hexaferrite family are shown below, where Me = a small 2+ ion such as cobalt, nickel, or zinc, and Ba can be substituted by Sr: • M-type ferrites, such as BaFe12O19 (BaM or barium ferrite), SrFe 12O19(SrM or strontium ferite), and cobalt-titanium substituted M ferrite, Sr- or BaFe 12−2xCoxTixO19, or CoTiM as discussed by the authors.

1,855 citations

Journal ArticleDOI
TL;DR: In this paper, the authors provide a state-of-the-art review on the development in heterogeneous catalysts including single metal, mixed metal, and nonmetal carbon catalysts for organic contaminants removal, with particular focus on peroxymonosulfate (PMS) activation.
Abstract: Sulfate radical-based advanced oxidation processes (SR-AOPs) employing heterogeneous catalysts to generate sulfate radical (SO4 −) from peroxymonosulfate (PMS) and persulfate (PS) have been extensively employed for organic contaminant removal in water. This article aims to provide a state–of–the–art review on the recent development in heterogeneous catalysts including single metal, mixed metal, and nonmetal carbon catalysts for organic contaminants removal, with particular focus on PMS activation. The hybrid heterogeneous catalyst/PMS systems integrated with other advanced oxidation technologies is also discussed. Several strategies for the identification of principal reactive radicals in SO4 −–oxidation systems are evaluated, namely (i) use of chemical probe or spin trapping agent coupled with analytical tools, and (ii) competitive kinetic approach using selective radical scavengers. The main challenges and mitigation strategies pertinent to the SR-AOPs are identified, which include (i) possible formation of oxyanions and disinfection byproducts, and (ii) dealing with sulfate produced and residual PMS. Potential future applications and research direction of SR-AOPs are proposed. These include (i) novel reactor design for heterogeneous catalytic system based on batch or continuous flow (e.g. completely mixed or plug flow) reactor configuration with catalyst recovery, and (ii) catalytic ceramic membrane incorporating SR-AOPs.

1,802 citations