Yung Chang

Bio: Yung Chang is an academic researcher from Chung Yuan Christian University. The author has contributed to research in topics: Membrane & Copolymer. The author has an hindex of 53, co-authored 254 publications receiving 9125 citations. Previous affiliations of Yung Chang include King Saud University & Industrial Technology Research Institute.

Surface grafted sulfobetaine polymers via atom transfer radical polymerization as superlow fouling coatings.

Abstract: One of the sulfobetaine methacrylate (SBMA) monomers, N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine, was polymerized onto initiator-covered gold surfaces using atom transfer radical polymerization (ATRP) to form uniform polymer brushes. Self-assembled monolayers (SAMs) with ATRP initiators were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). The thickness of grafted poly(SBMA) films was measured by ellipsometry. Fibrinogen adsorption on poly(SBMA) grafted surfaces was measured with a surface plasmon resonance (SPR) sensor. Two approaches were compared to graft ATRP initiators onto gold surfaces for surface polymerization and subsequent protein adsorption on these polymer grafted surfaces. The first was to prepare a SAM from ω-mercaptoundecyl bromoisobutyrate onto a gold surface. Superlow fouling surfaces with well-controlled poly(SBMA) brushes were achieved using this approach (e.g., fibrinogen adsorption <0.3 ng/cm2). The second approach w...

Physical cues of biomaterials guide stem cell differentiation fate.

Abstract: Akon Higuchi,*,†,‡,§ Qing-Dong Ling, Yung Chang, Shih-Tien Hsu, and Akihiro Umezawa‡ †Department of Chemical and Materials Engineering, National Central University, Jhongli, Taoyuan 32001, Taiwan ‡Department of Reproductive Biology, National Research Institute for Child Health and Development, 2-10-1 Okura, Setagaya-ku, Tokyo 157-8535, Japan Cathay Medical Research Institute, Cathay General Hospital, No. 32, Ln 160, Jian-Cheng Road, Hsi-Chi City, Taipei 221, Taiwan Institute of Systems Biology and Bioinformatics, National Central University, No. 300 Jhongda Rd., Jhongli, Taoyuan 32001, Taiwan Department of Chemical Engineering, R&D Center for Membrane Technology, Chung Yuan Christian University, 200 Chung-Bei Rd., Jhongli, Taoyuan 320, Taiwan Taiwan Landseed Hospital, 77 Kuangtai Road, Pingjen City, Tao-Yuan County 32405, Taiwan

Molecular simulation studies of protein interactions with zwitterionic phosphorylcholine self-assembled monolayers in the presence of water.

Abstract: Molecular simulations were performed to study the interactions between a protein (lysozyme, LYZ) and phosphorylcholine-terminated self-assembled monolayers (PC-SAMs) in the presence of explicit water molecules and ions. The results show that the water molecules above the PC-SAM surface create a strong repulsive force on the protein as it approaches the surface. The structural and dynamic properties of the water molecules above the PC-SAM surface were analyzed to provide information regarding the role of hydration in surface resistance to protein adsorption. It can be seen from residence time dynamics that the water molecules immediately above the PC-SAM surface are significantly slowed down as compared to bulk water, suggesting that the PC-SAM surface generates a tightly bound, structured water layer around its head groups. Moreover, the orientational distribution and reorientational dynamics of the interfacial water molecules near the PC-SAM surface were found to have the ionic solvation nature of the PC...

Highly protein-resistant coatings from well-defined diblock copolymers containing sulfobetaines

Abstract: Three well-defined diblock copolymers of poly(sulfobetaine methacrylate) [poly(SBMA)] and poly(propylene oxide) (PPO) were synthesized by the sequential addition of SBMA monomer to fixed amounts of PPO using an atom transfer radical polymerization method and varying poly(SBMA) lengths. These copolymers were characterized by 1H NMR and aqueous gel permeation chromatography. These copolymers were physically adsorbed onto a surface plasmon resonance (SPR) sensor surface covered by methyl-terminated self-assembled monolayers, followed by the in situ evaluation of protein adsorption on the adsorbed copolymers. It is found that the behavior of the protein adsorption depends on the molecular weight of the copolymers. Results show that the diblock copolymers containing poly(SBMA) can be highly protein resistant when surface SBMA densities are well controlled. Thus, copolymers containing zwitterionic groups are ideal for resisting protein adsorption when the surface density of zwitterionic groups is controlled.

Investigation of the hydration of nonfouling material poly(sulfobetaine methacrylate) by low-field nuclear magnetic resonance

Abstract: The strong surface hydration layer of nonfouling materials plays a key role in their resistance to nonspecific protein adsorption. Poly(sulfobetaine methacrylate) (polySBMA) is an effective material that can resist nonspecific protein adsorption and cell adhesion. About eight water molecules are tightly bound with one sulfobetaine (SB) unit, and additional water molecules over 8:1 ratio mainly swell the polySBMA matrix, which is obtained through the measurement of T(2) relaxation time by low-field nuclear magnetic resonance (LF-NMR). This result was also supported by the endothermic behavior of water/polySBMA mixtures measured by differential scanning calorimetry (DSC). Furthermore, by comparing both results of polySBMA and poly(ethylene glycol) (PEG), it is found that (1) the hydrated water molecules on the SB unit are more tightly bound than on the ethylene glycol (EG) unit before saturation, and (2) the additional water molecules after forming the hydration layer in polySBMA solutions show higher freedom than those in PEG. These results might illustrate the reason for higher resistance of zwitterionic materials to nonspecific protein adsorptions compared to that of PEGs.

Ultralow-Fouling, Functionalizable, and Hydrolyzable Zwitterionic Materials and Their Derivatives for Biological Applications

Abstract: In recent years, zwitterionic materials such as poly(carboxybetaine) (pCB) and poly(sulfobetaine) (pSB) have been applied to a broad range of biomedical and engineering materials. Due to electrostatically induced hydration, surfaces coated with zwitterionic groups are highly resistant to nonspecific protein adsorption, bacterial adhesion, and biofilm formation. Among zwitterionic materials, pCB is unique due to its abundant functional groups for the convenient immobilization of biomolecules. pCB can also be prepared in a hydrolyzable form as cationic pCB esters, which can kill bacteria or condense DNA. The hydrolysis of cationic pCB esters into nonfouling zwitterionic groups will lead to the release of killed microbes or the irreversible unpackaging of DNA. Furthermore, mixed-charge materials have been shown to be equivalent to zwitterionic materials in resisting nonspecific protein adsorption when they are uniformly mixed at the molecular scale.

Designing antimicrobial peptides: form follows function

Abstract: Multidrug-resistant bacteria are a severe threat to public health. Conventional antibiotics are becoming increasingly ineffective as a result of resistance, and it is imperative to find new antibacterial strategies. Natural antimicrobials, known as host defence peptides or antimicrobial peptides, defend host organisms against microbes but most have modest direct antibiotic activity. Enhanced variants have been developed using straightforward design and optimization strategies and are being tested clinically. Here, we describe advanced computer-assisted design strategies that address the difficult problem of relating primary sequence to peptide structure, and are delivering more potent, cost-effective, broad-spectrum peptides as potential next-generation antibiotics.

Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications

Abstract: Keywords: Fragmentation Chain-Transfer ; Self-Assembled Monolayers ; Walled Carbon Nanotubes ; Well-Defined Polymer ; Nitroxide-Mediated Polymerization ; Block-Copolymer Brushes ; Poly(Methyl Methacrylate) Brushes ; Transfer Raft Polymerization ; Quartz-Crystal Microbalance ; Poly(Acrylic Acid) Brushes Reference EPFL-REVIEW-148464doi:10.1021/cr900045aView record in Web of Science Record created on 2010-04-23, modified on 2017-05-10

Multimodal fast optical interrogation of neural circuitry

Abstract: Our understanding of the cellular implementation of systems-level neural processes like action, thought and emotion has been limited by the availability of tools to interrogate specific classes of neural cells within intact, living brain tissue. Here we identify and develop an archaeal light-driven chloride pump (NpHR) from Natronomonas pharaonis for temporally precise optical inhibition of neural activity. NpHR allows either knockout of single action potentials, or sustained blockade of spiking. NpHR is compatible with ChR2, the previous optical excitation technology we have described, in that the two opposing probes operate at similar light powers but with well-separated action spectra. NpHR, like ChR2, functions in mammals without exogenous cofactors, and the two probes can be integrated with calcium imaging in mammalian brain tissue for bidirectional optical modulation and readout of neural activity. Likewise, NpHR and ChR2 can be targeted together to Caenorhabditis elegans muscle and cholinergic motor neurons to control locomotion bidirectionally. NpHR and ChR2 form a complete system for multimodal, high-speed, genetically targeted, all-optical interrogation of living neural circuits.