scispace - formally typeset
Search or ask a question
Author

Yutian Lei

Bio: Yutian Lei is an academic researcher from University of Illinois at Urbana–Champaign. The author has contributed to research in topics: Capacitor & Switched capacitor. The author has an hindex of 25, co-authored 36 publications receiving 1581 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors present a 2-kW, 60-Hz, 450-V -to-240-V power inverter, designed and tested subject to the specifications of the Google/IEEE Little Box Challenge, which achieves a high power density of 216 W/in $3$ and a peak overall efficiency of 97.6%, while meeting the constraints including input current ripple, load transient, thermal, and FCC Class B EMC specifications.
Abstract: High-efficiency and compact single-phase inverters are desirable in many applications such as solar energy harvesting and electric vehicle chargers. This paper presents a 2-kW, 60-Hz, 450-V $ _{\text{DC}}$ -to-240-V $_{\text{AC}}$ power inverter, designed and tested subject to the specifications of the Google/IEEE Little Box Challenge. The inverter features a seven-level flying capacitor multilevel converter, with low-voltage GaN switches operating at 120 kHz. The inverter also includes an active buffer for twice-line-frequency power pulsation decoupling, which reduces the required capacitance by a factor of 8 compared to conventional passive decoupling capacitors, while maintaining an efficiency above 99%. The inverter prototype is a self-contained box that achieves a high power density of 216 W/in $^3$ and a peak overall efficiency of 97.6%, while meeting the constraints including input current ripple, load transient, thermal, and FCC Class B EMC specifications.

251 citations

Journal ArticleDOI
TL;DR: In this paper, the authors show that resonant and soft-charging operations of SC converters are closely related, and a technique will be proposed, which achieves either operation by adding a single inductor to existing SC topologies.
Abstract: Traditionally, switched-capacitor (SC) converters have suffered from high transient currents, which limit both the efficiency and power density of such converters. Soft-charging operation can be employed to eliminate the current transients and greatly improve the power density of SC converters. In this approach, a second-stage magnetic converter is cascaded with the SC stage to act as a controlled current load. Another approach is to use resonant SC converters with zero-current switching. This paper shows that resonant and soft-charging operations of SC converters are closely related, and a technique will be proposed, which achieves either operation by adding a single inductor to existing SC topologies. In addition, since most preexisting resonant or soft-charging SC converters were devised in an ad-hoc manner, this paper formulates an analytical method that can determine whether an existing conventional SC converter topology is compatible with the proposed approach. A number of common SC topologies are analyzed, including Dickson, series-parallel, ladder, Fibonacci, and doubler configurations. Through comparison to simulated results, as well as experimental work, the proposed method is validated and a family of high-performance SC converters is obtained.

210 citations

Journal ArticleDOI
TL;DR: In this paper, a split-phase control scheme was proposed to enable the Dickson converter to achieve complete soft-charging (or resonant) operation, which is not possible using the conventional two-phase controller.
Abstract: Switched-capacitor (SC) converters are gaining popularity due to their high power density and suitability for on-chip integration. Soft-charging and resonant techniques can be used to eliminate the current transient during the switching instances, and improve the power density and efficiency of SC converters. In this paper, we propose a split-phase control scheme that enables the Dickson converter to achieve complete soft-charging (or resonant) operation, which is not possible using the conventional two-phase control. An analytical method is extended to help in the analysis and design of split-phase controlled Dickson converters. The proposed technique and analysis are verified by both simulation and experimental results. An 8-to-1 step-down Dickson converter with an input voltage of 150 V and rated power of 36 W is built using GaN FETs. The converter prototype demonstrated a five fold reduction in the output impedance (which corresponds to conduction power loss) compared to a conventional Dickson converter, as a result of the split-phase controlled soft-charging operation.

125 citations

Journal ArticleDOI
TL;DR: In this paper, a high-efficiency, high-power-density buffer architecture is proposed for power pulsation decoupling in power conversion between dc and single-phase ac. In the proposed architecture, the main energy storage capacitor is connected in series with an active buffer converter across the dc bus.
Abstract: A high-efficiency, high-power-density buffer architecture is proposed for power pulsation decoupling in power conversion between dc and single-phase ac. We present an active decoupling solution that yields improved efficiency and reduced circuit complexity compared to existing solutions. In the proposed architecture, the main energy storage capacitor is connected in series with an active buffer converter across the dc bus. The series-stacked capacitor blocks the majority of the dc bus voltage to reduce the voltage stress on the buffer converter, such that fast, low-voltage transistors can be employed for the buffer converter. Moreover, the series capacitor provides the majority of the power pulsation decoupling through a wide voltage swing, and the buffer converter only needs to process a small fraction of the total power of the entire architecture, allowing a very small active circuit volume and very high system efficiency. The circuit operation and design constraints are analyzed in detail. In the proposed buffer architecture, the series stacking of a nearly lossless capacitor and a lossy converter presents a challenge of capacitor voltage balancing and power loss compensation. We propose a control scheme exploiting the small ripple in the bus voltage and dc input current to compensate for the power loss in the buffer converter while maintaining the voltage balance. Light-load techniques are also introduced to ensure that the buffer architecture meets strict ripple requirements while providing sufficient loss compensation. A 2-kW hardware prototype based on low-voltage GaN switches has been built to demonstrate the performance of the proposed solution. A power density of 25 W/cm $^3$ (410 W/in $^3$ ) by rectangular box volume and an efficiency above 98.9% across a wide load range has been experimentally verified.

118 citations

Journal ArticleDOI
TL;DR: In this paper, a quantitative method that can serve as a guide to compare and design multilevel topologies for large conversion ratio applications is presented, which keeps the conduction loss and switching loss constant across the different converters and employs the passive component volume as the single performance metric.
Abstract: This paper investigates the use of multilevel conversion in dc–dc applications that require a large voltage conversion ratio. A quantitative method that can serve as a guide to compare and design multilevel topologies for large conversion ratio applications is presented. The proposed method keeps the conduction loss and switching loss constant across the different converters and employs the passive component volume as the single performance metric. As examples, flying capacitor multilevel converters and hybrid switched-capacitor (SC) converters are compared to conventional two-level buck converters, and are shown analytically to have significantly reduced passive component size. Three converter prototypes are implemented, based on the presented methodology to experimentally validate the method as well as demonstrate the advantages of multilevel and hybrid SC converters.

117 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques, and discuss the advantages and disadvantages of these voltage boosting techniques and associated converters.
Abstract: DC–DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which fundamental energy storing elements (inductors and capacitors) and/or transformers in conjunction with switch(es) and diode(s) are utilized in the circuit. These techniques include switched capacitor (charge pump), voltage multiplier, switched inductor/voltage lift, magnetic coupling, and multistage/-level, and each has its own merits and demerits depending on application, in terms of cost, complexity, power density, reliability, and efficiency. To meet the growing demand for such applications, new power converter topologies that use the above voltage-boosting techniques, as well as some active and passive components, are continuously being proposed. The permutations and combinations of the various voltage-boosting techniques with additional components in a circuit allow for numerous new topologies and configurations, which are often confusing and difficult to follow. Therefore, to present a clear picture on the general law and framework of the development of next-generation step-up dc–dc converters, this paper aims to comprehensively review and classify various step-up dc–dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc–dc converters are presented and summarized with comparative study of different voltage-boosting techniques.

1,230 citations

01 Jan 1992
TL;DR: In this paper, a multilevel commutation cell is introduced for high-voltage power conversion, which can be applied to either choppers or voltage-source inverters and generalized to any number of switches.
Abstract: The authors discuss high-voltage power conversion. Conventional series connection and three-level voltage source inverter techniques are reviewed and compared. A novel versatile multilevel commutation cell is introduced: it is shown that this topology is safer and more simple to control, and delivers purer output waveforms. The authors show how this technique can be applied to either choppers or voltage-source inverters and generalized to any number of switches.<>

1,202 citations

Journal ArticleDOI
TL;DR: The UWBG semiconductor materials, such as high Al‐content AlGaN, diamond and Ga2O3, advanced in maturity to the point where realizing some of their tantalizing advantages is a relatively near‐term possibility.
Abstract: J. Y. Tsao,* S. Chowdhury, M. A. Hollis,* D. Jena, N. M. Johnson, K. A. Jones, R. J. Kaplar,* S. Rajan, C. G. Van de Walle, E. Bellotti, C. L. Chua, R. Collazo, M. E. Coltrin, J. A. Cooper, K. R. Evans, S. Graham, T. A. Grotjohn, E. R. Heller, M. Higashiwaki, M. S. Islam, P. W. Juodawlkis, M. A. Khan, A. D. Koehler, J. H. Leach, U. K. Mishra, R. J. Nemanich, R. C. N. Pilawa-Podgurski, J. B. Shealy, Z. Sitar, M. J. Tadjer, A. F. Witulski, M. Wraback, and J. A. Simmons

785 citations

Journal ArticleDOI
TL;DR: In this article, the authors present a 2-kW, 60-Hz, 450-V -to-240-V power inverter, designed and tested subject to the specifications of the Google/IEEE Little Box Challenge, which achieves a high power density of 216 W/in $3$ and a peak overall efficiency of 97.6%, while meeting the constraints including input current ripple, load transient, thermal, and FCC Class B EMC specifications.
Abstract: High-efficiency and compact single-phase inverters are desirable in many applications such as solar energy harvesting and electric vehicle chargers. This paper presents a 2-kW, 60-Hz, 450-V $ _{\text{DC}}$ -to-240-V $_{\text{AC}}$ power inverter, designed and tested subject to the specifications of the Google/IEEE Little Box Challenge. The inverter features a seven-level flying capacitor multilevel converter, with low-voltage GaN switches operating at 120 kHz. The inverter also includes an active buffer for twice-line-frequency power pulsation decoupling, which reduces the required capacitance by a factor of 8 compared to conventional passive decoupling capacitors, while maintaining an efficiency above 99%. The inverter prototype is a self-contained box that achieves a high power density of 216 W/in $^3$ and a peak overall efficiency of 97.6%, while meeting the constraints including input current ripple, load transient, thermal, and FCC Class B EMC specifications.

251 citations

Journal ArticleDOI
TL;DR: In this paper, the authors show that resonant and soft-charging operations of SC converters are closely related, and a technique will be proposed, which achieves either operation by adding a single inductor to existing SC topologies.
Abstract: Traditionally, switched-capacitor (SC) converters have suffered from high transient currents, which limit both the efficiency and power density of such converters. Soft-charging operation can be employed to eliminate the current transients and greatly improve the power density of SC converters. In this approach, a second-stage magnetic converter is cascaded with the SC stage to act as a controlled current load. Another approach is to use resonant SC converters with zero-current switching. This paper shows that resonant and soft-charging operations of SC converters are closely related, and a technique will be proposed, which achieves either operation by adding a single inductor to existing SC topologies. In addition, since most preexisting resonant or soft-charging SC converters were devised in an ad-hoc manner, this paper formulates an analytical method that can determine whether an existing conventional SC converter topology is compatible with the proposed approach. A number of common SC topologies are analyzed, including Dickson, series-parallel, ladder, Fibonacci, and doubler configurations. Through comparison to simulated results, as well as experimental work, the proposed method is validated and a family of high-performance SC converters is obtained.

210 citations