Yuzheng Ding

Bio: Yuzheng Ding is an academic researcher from University of California, Los Angeles. The author has contributed to research in topics: Field-programmable gate array & Lookup table. The author has an hindex of 8, co-authored 12 publications receiving 1373 citations. Previous affiliations of Yuzheng Ding include Bell Labs.

FlowMap: an optimal technology mapping algorithm for delay optimization in lookup-table based FPGA designs

Abstract: The field programmable gate-array (FPGA) has become an important technology in VLSI ASIC designs. In the past few years, a number of heuristic algorithms have been proposed for technology mapping in lookup-table (LUT) based FPGA designs, but none of them guarantees optimal solutions for general Boolean networks and little is known about how far their solutions are away from the optimal ones. This paper presents a theoretical breakthrough which shows that the LUT-based FPGA technology mapping problem for depth minimization can be solved optimally in polynomial time. A key step in our algorithm is to compute a minimum height K-feasible cut in a network, which is solved optimally in polynomial time based on network flow computation. Our algorithm also effectively minimizes the number of LUT's by maximizing the volume of each cut and by several post-processing operations. Based on these results, we have implemented an LUT-based FPGA mapping package called FlowMap. We have tested FlowMap on a large set of benchmark examples and compared it with other LUT-based FPGA mapping algorithms for delay optimization, including Chortle-d, MIS-pga-delay, and DAG-Map. FlowMap reduces the LUT network depth by up to 7% and reduces the number of LUT's by up to 50% compared to the three previous methods. >

Combinational logic synthesis for LUT based field programmable gate arrays

Abstract: The increasing popularity of the field programmable gate-array (FPGA) technology has generated a great deal of interest in the algorithmic study and tool development for FPGA-specific design automation problems. The most widely used FPGAs are LUT based FPGAs, in which the basic logic element is a K-input one-output lookup-table (LUT) that can implement any Boolean function of up to K variables. This unique feature of the LUT has brought new challenges to logic synthesis and optimization, resulting in many new techniques reported in recent years. This article summarizes the research results on combinational logic synthesis for LUT based FPGAs under a coherent framework. These results were dispersed in various conference proceedings and journals and under various formulations and terminologies. We first present general problem formulations, various optimization objectives and measurements, then focus on a set of commonly used basic concepts and techniques, and finally summarize existing synthesis algorithms and systems. We classify and summarize the basic techniques into two categories, namely, logic optimization and technology mapping, and describe the existing algorithms and systems in terms of how they use the classified basic techniques. A comprehensive list of references is compiled in the attached bibliography.

On area/depth trade-off in LUT-based FPGA technology mapping

Abstract: In this paper, we study the area and depth trade-off in lookup-table (LUT) based FPGA technology mapping. Starting from a depth-optimal mapping solution, we perform a sequence of depth relaxation operations and area-minimizing mapping procedures to produce a set of mapping solutions for a given design with smooth area and depth trade-off. As the core of the area minimization step, we have developed a polynomial time optimal algorithm for computing an area-minimum mapping solution without node duplication for a K-bounded general Boolean network, which makes a significant step towards complete understanding of the general area minimization problem in FPGA technology mapping. The experimental results on MCNC benchmark circuits show that our solution sets outperform the solutions produced by most existing mapping algorithms in terms of both area and depth minimization. >

On Area/Depth Trade-off in LUT-Based FPGA Technology Mapping

Abstract: In this paper we study the area and depth trade-off in LUT based FPGA technology mapping. Starting from a depth-optimal mapping solution, we perform a number of depth relaxation operations to obtain a new network with bounded increase in depth and advantageous to subsequent re-mapping for area minimization. We then re-map the resulting network to obtain an area-minimized mapping solution. By gradually increasing the depth bound, for each design we are able to produce a set of mapping solutions with smooth area and depth trade-off. For the area minimization step, we have developed an optimal algorithm for computing an area-minimum mapping solution without node duplication. Experimental results show that our solution sets outperform the solutions produced by many existing mapping algorithms in terms of both area and depth minimization.

RASP: A General Logic Synthesis System for SRAM-Based FPGAs

Abstract: In this paper, we present a general synthesis system for SRAM-based FPGAs named RASP. RASP consists of a core with a set of synthesis and optimization algorithms for technology independent logic synthesis and technology mapping for generating generic look-up tables (LUTs), together with a set of architecture-specific technology mapping routines to map the generic LUT network to programmable logic blocks (PLBs) for various SRAM-based FPGA architectures. Via a set of design representation converter routines, these architecture-independent and dependent synthesis algorithms are easily linked, and the entire system is seamlessly integrated into the design flow of commercial FPGA design systems. As a result, RASP can produce highly optimized designs for various SRAM-based FPGA architectures, and can be quickly adapted for new SRAM-based FPGA architectures. We compare RASP performance with that of several commercial synthesis systems on the MCNC logic synthesis benchmarks and a video compressor/decompressor. For almost all cases, RASP produces mapping solutions with significantly smaller critical path delay after place and route than current commercial synthesis systems.

VPR: A new packing, placement and routing tool for FPGA research

Abstract: We describe the capabilities of and algorithms used in a new FPGA CAD tool, Versatile Place and Route (VPR). In terms of minimizing routing area, VPR outperforms all published FPGA place and route tools to which we can compare. Although the algorithms used are based on previously known approaches, we present several enhancements that improve run-time and quality. We present placement and routing results on a new set of large circuits to allow future benchmark comparisons of FPGA place and route tools on circuit sizes more typical of today's industrial designs.

FlowMap: an optimal technology mapping algorithm for delay optimization in lookup-table based FPGA designs

Abstract: The field programmable gate-array (FPGA) has become an important technology in VLSI ASIC designs. In the past few years, a number of heuristic algorithms have been proposed for technology mapping in lookup-table (LUT) based FPGA designs, but none of them guarantees optimal solutions for general Boolean networks and little is known about how far their solutions are away from the optimal ones. This paper presents a theoretical breakthrough which shows that the LUT-based FPGA technology mapping problem for depth minimization can be solved optimally in polynomial time. A key step in our algorithm is to compute a minimum height K-feasible cut in a network, which is solved optimally in polynomial time based on network flow computation. Our algorithm also effectively minimizes the number of LUT's by maximizing the volume of each cut and by several post-processing operations. Based on these results, we have implemented an LUT-based FPGA mapping package called FlowMap. We have tested FlowMap on a large set of benchmark examples and compared it with other LUT-based FPGA mapping algorithms for delay optimization, including Chortle-d, MIS-pga-delay, and DAG-Map. FlowMap reduces the LUT network depth by up to 7% and reduces the number of LUT's by up to 50% compared to the three previous methods. >

Reconfigurable Computing: The Theory and Practice of FPGA-Based Computation

Abstract: The main characteristic of Reconfigurable Computing is the presence of hardware that can be reconfigured to implement specific functionality more suitable for specially tailored hardware than on a simple uniprocessor. Reconfigurable computing systems join microprocessors and programmable hardware in order to take advantage of the combined strengths of hardware and software and have been used in applications ranging from embedded systems to high performance computing. Many of the fundamental theories have been identified and used by the Hardware/Software Co-Design research field. Although the same background ideas are shared in both areas, they have different goals and use different approaches.This book is intended as an introduction to the entire range of issues important to reconfigurable computing, using FPGAs as the context, or "computing vehicles" to implement this powerful technology. It will take a reader with a background in the basics of digital design and software programming and provide them with the knowledge needed to be an effective designer or researcher in this rapidly evolving field. · Treatment of FPGAs as computing vehicles rather than glue-logic or ASIC substitutes · Views of FPGA programming beyond Verilog/VHDL · Broad set of case studies demonstrating how to use FPGAs in novel and efficient ways

Hardware/software co-design

Abstract: Most electronic systems, whether self contained or embedded, have a predominant digital component consisting of a hardware platform which executes software application programs. Hardware/software co-design means meeting system level objectives by exploiting the synergism of hardware and software through their concurrent design. Co-design problems have different flavors according to the application domain, implementation technology and design methodology. Digital hardware design has increasingly more similarities to software design. Hardware circuits are often described using modeling or programming languages, and they are validated and implemented by executing software programs, which are sometimes conceived for the specific hardware design. Current integrated circuits can incorporate one (or more) processor core(s) and memory array(s) on a single substrate. These "systems on silicon" exhibit a sizable amount of embedded software, which provides flexibility for product evolution and differentiation purposes. Thus the design of these systems requires designers to be knowledgeable in both hardware and software domains to make good design tradeoffs. The paper introduces various aspects of co-design. We highlight the commonalities and point out the differences in various co-design problems in some application areas. Co-design issues and their relationship to classical system implementation tasks are discussed to help develop a perspective on modern digital system design that relies on computer aided design (CAD) tools and methods.