Additive manufacturing of metallic components – Process, structure and properties

The phase-field method is reviewed against its historical and theoretical background. Starting from Van der Waals considerations on the structure of interfaces in materials the concept of the phase-field method is developed along historical lines. Basic relations are summarized in a comprehensive way. Special emphasis is given to the multi-phase-field method with extension to elastic interactions and fluid flow which allows one to treat multi-grain multi-phase structures in multicomponent materials. Examples are collected demonstrating the applicability of the different variants of the phase-field method in different fields of materials science.

/pdf/phase-field-models-in-materials-science-3t9zrlgrx4.pdf

Phase-field models in materials science

Magnesium casting technology for structural applications

Solidification microstructures and solid-state parallels: Recent developments, future directions

Outstanding mechanical and physical properties like high thermal resistance, high hardness and chemical stability have encouraged use of structural ceramics in several applications. The brittle and hard nature of these ceramics makes them difficult to machine using conventional techniques and damage caused to the surface while machining affects efficiency of components. Laser machining has recently emerged as a potential technique for attaining high material removal rates. This review paper aims at presenting the state of the art in the field of laser machining of structural ceramics and emphasizes on experimental and computational approaches in understanding physical nature of the complex phenomena.

Laser machining of structural ceramics—A review

The use of magnesium alloys in structural applications has great potential for the lightweighting of transportation vehicles. Research within the CAST Cooperative Research Centre has tackled some of the important issues related to the use of magnesium in structural applications. To this end, a new alloy with extrudability and properties similar to 6000 series aluminum alloys has been developed. Furthermore, a method of laser heating magnesium alloys before self-piercing riveting has enabled high-integrity joining between magnesium components or between magnesium and dissimilar metals. In this paper, new technologies and improved understanding of the deformation behavior of wrought magnesium alloys are discussed in light of key metallurgical features such as alloy composition, grain size, and work hardening rate.

Magnesium alloy applications in automotive structures

A systematic research into the cladding of stellite 6 on stainless steel by pulsed Nd:YAG laser has been carried out. The effects of pulse energy, pulse frequency, powder mass flow rate and spot overlap on the clad layer height, dilution and heat-affected zone (HAZ) have been examined. It was found that both the clad height and penetration into the substrate increase with the pulse energy, spot overlap and pulse frequency, but the effects of these parameters on dilution are complex. The dilution reaches the lowest value (4%) at the incident energy of 18 and 25 J/ pulse, spot overlap of 89% and pulse frequency of 40 Hz. The powder mass flow rate of 22 g/min (for energy of 25 J/pulse and spot overlap of 83%) produces thick clad layer with low dilution but results in the formation of defects. The hardness of the clad layer decreases linearly with increasing dilution. No cracks have been found in single-track clad layers at a spot overlap of 89%, however, cracks occurred at lower spot overlap. These cracks were eliminated by the multi-track cladding when the track increment is less than 1/3 of the width of track, which is believed to be due to the remelting or heat treatment of the previous clad track by the subsequent track. The track bands in multi-track clad show coarser structure, higher element segregation and lower hardness.

Yvonne Durandet

Papers

Magnesium alloy applications in automotive structures

Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel

Pulsed Nd:YAG laser cladding of stellite 6 on stainless steel

Large deformation of an auxetic structure in tension: Experiments and finite element analysis

Laser assisted self-pierce riveting of AZ31 magnesium alloy strips