Zaki Ahmad

Bio: Zaki Ahmad is an academic researcher from King Fahd University of Petroleum and Minerals. The author has contributed to research in topics: Corrosion & Alloy. The author has an hindex of 12, co-authored 44 publications receiving 658 citations. Previous affiliations of Zaki Ahmad include COMSATS Institute of Information Technology.

Photocatalytic systems as an advanced environmental remediation: Recent developments, limitations and new avenues for applications

Abstract: Heterogeneous photocatalysis is a promising technology especially for environmental remediation. Despite more than a decade of worldwide research in developing photocatalytic efficiency improving techniques, many questions regarding the large scale application of photocatalytic reactors still remain unanswered. Recently, improving the photocatalytic efficiency has gained scientific attention because it might lead to more economical and robust photocatalytic operation for environmental remediation. In this review, fundamental and comprehensive assessments of the photocatalytic concepts and their applications for environmental remediation are reviewed. The existing challenges and strategies to improve the photocatalytic efficiency are discussed. Further, recent developments and future research prospects on photocatalytic systems for environmental applications are also addressed.

The properties and application of scandium-reinforced aluminum

Abstract: Scandium-reinforced aluminum alloys represent a new generation of high-performance alloys that display numerousadvantages over high-strength aluminum alloys. Scandium-reinforced alloys are much stronger than other high-strength alloys, exhibit significant grain refinement, strengthen welds, and eliminate hot cracking in welds. These alloys also exhibit a good resistance to corrosion as shown by recent studies. A review of their mechanical, microstructural, and corrosion characteristics shows that scandium-reinforced alloys can be usefully employed in aerospace, sports, transportation, and process industries. The information on scandium-reinforced alloys is scanty; very little has been published on the mechanical, microstructural, and corrosion behavior of these alloys. The following fills this gap.

A review on hyperthermia via nanoparticle-mediated therapy.

Abstract: Hyperthermia treatment, generated by magnetic nanoparticles (MNPs) is promising since it is tumour-focused, minimally invasive and uniform. The most unique feature of magnetic nanoparticles is its reaction and modulation by a magnetic force basically responsible for enabling its potential as heating mediators for cancer therapy. In magnetic nanoparticle hyperthermia, a tumour is preferentially loaded with systemically administered nanoparticles with high-absorption cross-section for transduction of an extrinsic energy source to heat. To maximize the energy deposited in the tumour while limiting the exposure to healthy tissues, the heating is achieved by exposing the region of tissue containing magnetic nanoparticles to an alternating magnetic field. The magnetic nanoparticles dissipate heat from relaxation losses thereby heating localized tissue above normal physiological ranges. Besides thermal efficiency, the biocompatibility of magnetite nanoparticles assisted its deployment as efficient drug carrier for targeted therapeutic regimes. In the present article, we provide a state-of-the-art review focused on progress in nanoparticle induced hyperthermia treatments that have several potential advantages over both global and local hyperthermia treatments achieved without nanoparticles. Green bio-nanotechnology has attracted substantial attention and has demonstrable abilities to improve cancer therapy. Furthermore, we have listed the challenges associated with this treatment along with future prospective that could attract the interest of biomedical engineers, biomaterials scientists, medical researchers and pharmacological research groups.

Ultracapacitors: Why, How, and Where is the Technology

Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Scandium in aluminium alloys

Abstract: A considerable part of the available literature on scandium in aluminium alloys is reviewed. Experimental data and assessments of the binary Al–Sc phase diagram, a wide range of ternary Al–Sc–X phase diagrams and a few higher order phase diagrams are accounted for, with emphasis on the aluminium rich part of the diagrams. The phase which is in equilibrium with Al, Al3Sc, can form by several different mechanisms, all of which are described. The precipitation kinetics of Al3Sc in binary Al–Sc alloys are discussed, and an overview of the reported influences of ternary alloying elements on the precipitation of Al3Sc is given. The Al3Sc phase particles can serve as a grain refiner in the Al melt, a dispersoid for controlling the grain structure of the alloy and a strengthening precipitate. Several examples of these three effects are mentioned, both in binary Al–Sc alloys, and in more complex alloys. The reported effects of Sc on the precipitation behaviour in Al–Cu, Al–Mg–Si, Al–Zn–Mg and Al–Li alloys ...

Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods

Abstract: Over the last 40 years, the commercial production of titanium and its alloys has increased steadily. Whilst these materials have some very attractive properties, enabling applications in many industries, they are seldom used in mechanical engineering applications because of their poor tribological properties. This paper starts with an introduction to the titanium material and a review of the different types of surface treatment. The processes of nitriding, oxidation and carburizing are among the most popular thermochemical treatments aiming at improving the surface properties of Ti-alloys. Different kinds of nitriding are investigated like plasma nitriding, ion nitriding, and laser and gas nitriding. The kinetics of nitriding and the conditions for the formation of nitrided layers are studied. The influence of the main processing parameters such as temperature, time on the microstructure and the formation of new phases during the processes of nitriding is discussed. Also based on investigations presented in the literature, the effects of nitriding on the microhardness and the corrosion resistance of titanium and titanium alloys are analyzed. The improved mechanical properties, which arise from these thermochemical treatments, are discussed in relation to the potential for applying these alloys to different industries.