Zhi Hao Jiang

Bio: Zhi Hao Jiang is an academic researcher from Southeast University. The author has contributed to research in topics: Metamaterial & Antenna (radio). The author has an hindex of 29, co-authored 169 publications receiving 3256 citations. Previous affiliations of Zhi Hao Jiang include Pennsylvania State University.

Multibeam Antenna Technologies for 5G Wireless Communications

Abstract: With the demanding system requirements for the fifth-generation (5G) wireless communications and the severe spectrum shortage at conventional cellular frequencies, multibeam antenna systems operating in the millimeter-wave frequency bands have attracted a lot of research interest and have been actively investigated. They represent the key antenna technology for supporting a high data transmission rate, an improved signal-to-interference-plus-noise ratio, an increased spectral and energy efficiency, and versatile beam shaping, thereby holding a great promise in serving as the critical infrastructure for enabling beamforming and massive multiple-input multiple-output (MIMO) that boost the 5G. This paper provides an overview of the existing multibeam antenna technologies which include the passive multibeam antennas (MBAs) based on quasi-optical components and beamforming circuits, multibeam phased-array antennas enabled by various phase-shifting methods, and digital MBAs with different system architectures. Specifically, their principles of operation, design, and implementation, as well as a number of illustrative application examples are reviewed. Finally, the suitability of these MBAs for the future 5G massive MIMO wireless systems as well as the associated challenges is discussed.

Conformal dual-band near-perfectly absorbing mid-infrared metamaterial coating.

Abstract: Metamaterials offer a new approach to create surface coatings with highly customizable electromagnetic absorption from the microwave to the optical regimes. Thus far, efficient metamaterial absorbers have been demonstrated at microwave frequencies, with recent efforts aimed at much shorter terahertz and infrared wavelengths. The present infrared absorbers have been constructed from arrays of nanoscale metal resonators with simple circular or cross-shaped geometries, which provide a single band response. In this paper, we demonstrate a conformal metamaterial absorber with a narrow band, polarization-independent absorptivity of >90% over a wide ±50° angular range centered at mid-infrared wavelengths of 3.3 and 3.9 μm. The highly efficient dual-band metamaterial was realized by using a genetic algorithm to identify an array of H-shaped nanoresonators with an effective electric and magnetic response that maximizes absorption in each wavelength band when patterned on a flexible Kapton and Au thin film substrat...

A Compact, Low-Profile Metasurface-Enabled Antenna for Wearable Medical Body-Area Network Devices

Abstract: We propose a compact conformal wearable antenna that operates in the 2.36-2.4 GHz medical body-area network band. The antenna is enabled by placing a highly truncated metasurface, consisting of only a two by two array of I-shaped elements, underneath a planar monopole. In contrast to previously reported artificial magnetic conducting ground plane backed antenna designs, here the metasurface acts not only as a ground plane for isolation, but also as the main radiator. An antenna prototype was fabricated and tested, showing a strong agreement between simulation and measurement. Comparing to previously proposed wearable antennas, the demonstrated antenna has a compact form factor of 0.5 λ 0 ×0.3 λ 0 ×0.028 λ 0 , all while achieving a 5.5% impedance bandwidth, a gain of 6.2 dBi, and a front-to-back ratio higher than 23 dB. Further numerical and experimental investigations reveal that the performance of the antenna is extraordinarily robust to both structural deformation and human body loading, far superior to both planar monopoles and microstrip patch antennas. Additionally, the introduced metal backed metasurface enables a 95.3% reduction in the specific absorption rate, making such an antenna a prime candidate for incorporation into various wearable devices.

The Role of Millimeter-Wave Technologies in 5G/6G Wireless Communications

Abstract: Ever since the deployment of the first-generation of mobile telecommunications, wireless communication technology has evolved at a dramatically fast pace over the past four decades. The upcoming fifth-generation (5G) holds a great promise in providing an ultra-fast data rate, a very low latency, and a significantly improved spectral efficiency by exploiting the millimeter-wave spectrum for the first time in mobile communication infrastructures. In the years beyond 2030, newly emerged data-hungry applications and the greatly expanded wireless network will call for the sixth-generation (6G) communication that represents a significant upgrade from the 5G network – covering almost the entire surface of the earth and the near outer space. In both the 5G and future 6G networks, millimeter-wave technologies will play an important role in accomplishing the envisioned network performance and communication tasks. In this paper, the relevant millimeter-wave enabling technologies are reviewed: they include the recent developments on the system architectures of active beamforming arrays, beamforming integrated circuits, antennas for base stations and user terminals, system measurement and calibration, and channel characterization. The requirements of each part for future 6G communications are also briefly discussed.

A Compact, Wideband Circularly Polarized Co-designed Filtering Antenna and Its Application for Wearable Devices With Low SAR

Abstract: A compact circularly polarized (CP) co-designed filtering antenna is reported. The device is based on a patch radiator seamlessly integrated with a bandpass filter composed of coupled stripline open-loop resonators, which are designed together as a system. In the proposed design, the patch functions simultaneously as the radiator and the last stage resonator of the filter, resulting in a low-profile integrated radiating and filtering module with a small overall form factor of $\mathbf{0.53{\lambda _0} \times 0.53{\lambda _0} \times 0.07{\lambda _0}}$ . It is shown that the filtering circuit not only ensures frequency selectivity but also provides impedance matching functionality, which serves to broaden both the impedance and axial ratio bandwidths. The designed filtering antenna was fabricated and measured, experimentally achieving an $\mathbf{{S_{11}} , an axial ratio of less than 3 dB and a gain higher than 5.2 dBi over a bandwidth from 3.77 to 4.26 GHz, i.e., around 12.2%, which makes it an excellent candidate for integration into a variety of wireless systems. A linearly polarized version of the integrated filtering antenna was also demonstrated. In addition, further full-wave simulations and experiments were carried out to verify that the designed CP filtering antenna maintains its properties even when mounted on different positions of the human body with various body gestures. The stable impedance and radiation properties also make it a suitable candidate as a wearable antenna for off-body wireless communications.

Flat Optics With Designer Metasurfaces

Abstract: Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.

Metamaterial Electromagnetic Wave Absorbers

Abstract: The advent of negative index materials has spawned extensive research into metamaterials over the past decade. Metamaterials are attractive not only for their exotic electromagnetic properties, but also their promise for applications. A particular branch–the metamaterial perfect absorber (MPA)–has garnered interest due to the fact that it can achieve unity absorptivity of electromagnetic waves. Since its first experimental demonstration in 2008, the MPA has progressed significantly with designs shown across the electromagnetic spectrum, from microwave to optical. In this Progress Report we give an overview of the field and discuss a selection of examples and related applications. The ability of the MPA to exhibit extreme performance flexibility will be discussed and the theory underlying their operation and limitations will be established. Insight is given into what we can expect from this rapidly expanding field and future challenges will be addressed.

Ultrabroadband light absorption by a sawtooth anisotropic metamaterial slab

Abstract: We present an ultrabroadband thin-film infrared absorber made of sawtoothed anisotropic metamaterial. Absorptivity of higher than 95% at normal incidence is supported in a wide range of frequencies, where the full absorption width at half-maximum is about 86%. Such property is retained well at a very wide range of incident angles too. Light of shorter wavelengths are harvested at upper parts of the sawteeth of smaller widths, while light of longer wavelengths are trapped at lower parts of larger tooth widths. This phenomenon is explained by the slowlight modes in anisotropic metamaterial waveguide. Our study can be applied in the field of designing photovoltaic devices and thermal emitters.

Ultra-broadband Microwave Metamaterial Absorber

Abstract: A microwave ultra-broadband polarization-independent metamaterial absorber is demonstrated. It is composed of a periodic array of metal-dielectric multilayered quadrangular frustum pyramids. These pyramids possess resonant absorption modes at multi-frequencies, of which the overlapping leads to the total absorption of the incident wave over an ultra-wide spectral band. The experimental absorption at normal incidence is above 90% in the frequency range of 7.8-14.7GHz, and the absorption is kept large when the incident angle is smaller than 60 degrees. The experimental results agree well with the numerical simulation.