Zhifeng Ding

Bio: Zhifeng Ding is an academic researcher from University of Western Ontario. The author has contributed to research in topics: Electrochemiluminescence & Scanning electrochemical microscopy. The author has an hindex of 42, co-authored 179 publications receiving 7326 citations. Previous affiliations of Zhifeng Ding include Jianghan University & University of Texas at Austin.

An Electrochemical Avenue to Blue Luminescent Nanocrystals from Multiwalled Carbon Nanotubes (MWCNTs)

Abstract: Blue luminescent nanocrystals (NCs) were prepared electrochemically from multiwalled carbon nanotubes (MWCNTs) for the first time. The carbon NCs were characterized by UV−vis, photoluminescence, Raman, XRD spectroscopy, and high-resolution transmission electron microscopy. The structure evolution of the MWCNTs during electrochemical treatments was monitored by SEM ex situ. Since the MWCNTs were formed with scrolled graphene layers, we propose that tetrabutyl ammonium (TBA) cations most probably intercalate into the gaps and the defects during electrochemical cycling and break the tubes near the defects.

Electrochemistry and Electrogenerated Chemiluminescence from Silicon Nanocrystal Quantum Dots

Abstract: Reversible electrochemical injection of discrete numbers of electrons into sterically stabilized silicon nanocrystals (NCs) (∼2 to 4 nanometers in diameter) was observed by differential pulse voltammetry (DPV) in N , N ′-dimethylformamide and acetonitrile. The electrochemical gap between the onset of electron injection and hole injection—related to the highest occupied and lowest unoccupied molecular orbitals—grew with decreasing nanocrystal size, and the DPV peak potentials above the onset for electron injection roughly correspond to expected Coulomb blockade or quantized double-layer charging energies. Electron transfer reactions between positively and negatively charged nanocrystals (or between charged nanocrystals and molecular redox-active coreactants) occurred that led to electron and hole annihilation, producing visible light. The electrogenerated chemiluminescence spectra exhibited a peak maximum at 640 nanometers, a significant red shift from the photoluminescence maximum (420 nanometers) of the same silicon NC solution. These results demonstrate that the chemical stability of silicon NCs could enable their use as redox-active macromolecular species with the combined optical and charging properties of semiconductor quantum dots.

Electrogenerated Chemiluminescence of CdSe Nanocrystals

Abstract: Electrogenerated chemiluminescence (ECL) was observed from TOPO-capped CdSe nanocrystals dissolved in CH2Cl2 containing 0.1 M TBAP. The solution of monodisperse nanocrystals with an absorption maximum at 537 nm was synthesized at 330 °C using TOPO (trioctylphosphineoxide) and TOP (trioctylphosphine) as capping agents and Cd-acetate and Se powder as precursors. The photoluminescence (PL) spectrum showed an emission maximum at 545 nm. Cyclic voltammetry and differential pulse voltammetry of this solution displayed no distinctive features, but light emission was observed through the annihilation of oxidized and reduced forms electrogenerated during cyclic potential scans or steps. The oxidized species was somewhat more stable than the reduced form. The ECL spectrum was substantially red shifted by ∼200 nm from the PL spectrum, suggesting that surface states play an important role in the emission process.

Novel Electrochemical Studies of Ionic Liquids

Abstract: Room-temperature ionic liquids (ILs) have been proposed as alternative solvents for organic synthesis, separations, and electrochemical applications. Here, we report studies that probe the electrochemical and solvation properties of a tetraalkylammonium (methyltributylammonium bis(trifluoromethylsulfon)imide, M3BNIm) and an imidazolium (1-butyl-3-methylimidazolium hexafluorophosphate, BMIPF6) based ionic liquid. It is demonstrated that despite impurities, the cathodic limit at a Pt electrode is enhanced for the tetraalkylammonium-based IL. Electrogenerated chemiluminescence of tris(2,2‘-bipyrindinyl)ruthenium (Ru(bpy)32+) was observed in both ionic liquids, and differences in the response were interpreted in terms of the solvent reactivity and polarity. As ILs have been proposed as alternatives to organic solvents in extraction processes, an understanding of the relative lipophilicity of the IL ions and the equilibrium potential difference established across the IL/water interface is of fundamental releva...

Review—Electrogenerated Chemiluminescence: Light Years Ahead

Abstract: An overview is given on great achievements in electrogenerated chemiluminescence or electrochemiluminescence (ECL) by Allen J. Bard. The established ECL theories and fundamentals are first described. The developed analytical instrumentation and methodology for ECL are then revealed. Studies of various types of ECL luminophores are summarized. The discovered ECL applications especially in bioanalysis and bioimaging are finally depicted. Bard's presentations and publications on ECL are indispensable resources of inspiration and guides for ECL researchers worldwide, who will further advance ECL research and applications already in a prosperous stage.

Luminescent Carbon Nanodots: Emergent Nanolights

Abstract: Similar to its popular older cousins the fullerene, the carbon nanotube, and graphene, the latest form of nanocarbon, the carbon nanodot, is inspiring intensive research efforts in its own right. These surface-passivated carbonaceous quantum dots, so-called C-dots, combine several favorable attributes of traditional semiconductor-based quantum dots (namely, size- and wavelength-dependent luminescence emission, resistance to photobleaching, ease of bioconjugation) without incurring the burden of intrinsic toxicity or elemental scarcity and without the need for stringent, intricate, tedious, costly, or inefficient preparation steps. C-dots can be produced inexpensively and on a large scale (frequently using a one-step pathway and potentially from biomass waste-derived sources) by many approaches, ranging from simple candle burning to in situ dehydration reactions to laser ablation methods. In this Review, we summarize recent advances in the synthesis and characterization of C-dots. We also speculate on their future and discuss potential developments for their use in energy conversion/storage, bioimaging, drug delivery, sensors, diagnostics, and composites.

Carbon quantum dots and their applications

Abstract: Fluorescent carbon nanoparticles or carbon quantum dots (CQDs) are a new class of carbon nanomaterials that have emerged recently and have garnered much interest as potential competitors to conventional semiconductor quantum dots. In addition to their comparable optical properties, CQDs have the desired advantages of low toxicity, environmental friendliness low cost and simple synthetic routes. Moreover, surface passivation and functionalization of CQDs allow for the control of their physicochemical properties. Since their discovery, CQDs have found many applications in the fields of chemical sensing, biosensing, bioimaging, nanomedicine, photocatalysis and electrocatalysis. This article reviews the progress in the research and development of CQDs with an emphasis on their synthesis, functionalization and technical applications along with some discussion on challenges and perspectives in this exciting and promising field.

Graphene oxide as a chemically tunable platform for optical applications

Abstract: Chemically derived graphene oxide (GO) is an atomically thin sheet of graphite that has traditionally served as a precursor for graphene, but is increasingly attracting chemists for its own characteristics. It is covalently decorated with oxygen-containing functional groups - either on the basal plane or at the edges - so that it contains a mixture of sp(2)- and sp(3)-hybridized carbon atoms. In particular, manipulation of the size, shape and relative fraction of the sp(2)-hybridized domains of GO by reduction chemistry provides opportunities for tailoring its optoelectronic properties. For example, as-synthesized GO is insulating but controlled deoxidation leads to an electrically and optically active material that is transparent and conducting. Furthermore, in contrast to pure graphene, GO is fluorescent over a broad range of wavelengths, owing to its heterogeneous electronic structure. In this Review, we highlight the recent advances in optical properties of chemically derived GO, as well as new physical and biological applications.

Hydrothermal route for cutting graphene sheets into blue-luminescent graphene quantum dots

Abstract: 2010 WILEY-VCH Verlag Gm Graphene-based materials are promising building blocks for future nanodevices owing to their superior electronic, thermal, and mechanical properties as well as their chemical stability. However, currently available graphene-based materials produced by typical physical and chemical routes, including micromechanical cleavage, reduction of exfoliated graphene oxide (GO), and solvothermal synthesis, are generally micrometer-sized graphene sheets (GSs), which limits their direct application in nanodevices. In this context, it has become urgent to develop effective routes for cutting large GSs into nanometer-sized pieces with a well-confined shape, such as graphene nanoribbons (GNRs) and graphene quantum dots (GQDs). Theoretical and experimental studies have shown that narrow GNRs (width less than ca. 10 nm) exhibit substantial quantum confinement and edge effects that render GNRs semiconducting. By comparison, GQDs possess strong quantum confinement and edge effects when their sizes are down to 100 nm. If their sizes are reduced to ca. 10 nm, comparable with the widths of semiconducting GNRs, the two effects will become more pronounced and, hence, induce new physical properties. Up to now, nearly all experimental work on GNRs and GQDs has focused on their electron transportation properties. Little work has been done on the optical properties that are directly associated with the quantum confinement and/or edge effects. Most GNRand GQD-based electronic devices have been fabricated by lithography techniques, which can realize widths and diameters down to ca. 20 nm. This physical approach, however, is limited by the need for expensive equipment and especially by difficulties in obtaining smooth edges. Alternative chemical routes can overcome these drawbacks. Moreover, surface functionalization can be realized easily. Li et al. first reported a chemical route to functionalized and ultrasmooth GNRs with widths ranging from 50 nm to sub-10 nm. Very recently, Kosynkin et al. reported a simple solution-based oxidative process for producing GNRs by lengthwise cutting and unraveling of multiwalled carbon nanotube (CNT) side walls. Yet, no chemical routes have been reported so far for preparing functionalized GQDs with sub-10 nm sizes. Here, we report on a novel and simple hydrothermal approach for the cutting of GSs into surface-functionalized GQDs (ca. 9.6-nm average diameter). The functionalized GQDs were found to exhibit bright blue photoluminescence (PL), which has never been observed in GSs and GNRs owing to their large lateral sizes. The blue luminescence and new UV–vis absorption bands are directly induced by the large edge effect shown in the ultrafine GQDs. The starting material was micrometer-sized rippled GSs obtained by thermal reduction of GO sheets. Figure 1a shows a typical transmission electron microscopy (TEM) image of the pristine GSs. Their (002) interlayer spacing is 3.64 A (Fig. 1c), larger than that of bulk graphite (3.34 A). Before the hydrothermal treatment, the GSs were oxidized in concentrated H2SO4 and HNO3. After the oxidization treatment the GSs became slightly smaller (50 nm–2mm) and the (002) spacing slightly increased to 3.85 A (Fig. 1c). During the oxidation, oxygen-containing functional groups, including C1⁄4O/COOH, OH, and C O C, were introduced at the edge and on the basal plane, as shown in the Fourier transform infrared (FTIR) spectrum (Fig. 1d). The presence of these groups makes the GSs soluble in water. A series of more marked changes took place after the hydrothermal treatment of the oxidized GSs at 200 8C. First, the (002) spacing was reduced to 3.43 A (Fig. 1c), very close to that of bulk graphite, indicating that deoxidization occurs during the hydrothermal process. The deoxidization is further confirmed by the changes in the FTIR and C 1s X-ray photoelectron spectroscopy (XPS) spectra. After the hydrothermal treatment, the strongest vibrational absorption band of C1⁄4O/COOH at 1720 cm 1 became very weak and the vibration band of epoxy groups at 1052 cm 1 disappeared (Fig. 1d). In the XPS C 1s spectra of the oxidized and hydrothermally reduced GSs (Fig. 2a), the signal at 289 eV assigned to carboxyl groups became weak after the hydrothermal treatment, whereas the sp carbon peak at 284.4 eV was almost unchanged. Figure 2b shows the Raman spectrum of the reduced GSs. A G band at 1590 cm 1 and a D band at 1325 cm 1 were observed with a large intensity ratio ID/IG of 1.26. Second, the size of the GSs decreased dramatically and ultrafine GQDswere isolated by a dialysis process. Figure 3 shows typical TEM and atomic force microscopy (AFM) images of the GQDs. Their diameters are mainly distributed in the range of 5–13 nm (9.6 nm average diameter). Their topographic heights are mostly between 1 and 2 nm, similar to those observed in functionalized GNRs with 1–3 layers. More than 85% of the GQDs consist of 1–3 layers.

Water‐Soluble Fluorescent Carbon Quantum Dots and Photocatalyst Design

Abstract: Carbon nanostructures are attracting intense interest because of their many unique and novel properties. The strong and tunable luminescence of carbon materials further enhances their versatile properties; in particular, the quantum effect in carbon is extremely important both fundamentally and technologically. Recently, photoluminescent carbonbased nanoparticles have received much attention. They are usually prepared by laser ablation of graphite, electrochemical oxidation of graphite, electrochemical soaking of carbon nanotubes, thermal oxidation of suitable molecular precursors, vapor deposition of soot, proton-beam irradiation of nanodiamonds, microwave synthesis, and bottom-up methods. Although small (ca. 2 nm) graphite nanoparticles show strong blue photoluminescence (PL), definitive experimental evidence for luminescence of carbon structure arising from quantum-confinement effects and size-dependent optical properties of carbon quantum dots (CQDs) remains scarce. Herein, we report the facile one-step alkali-assisted electrochemical fabrication of CQDs with sizes of 1.2– 3.8 nm which possess size-dependent photoluminescence (PL) and excellent upconversion luminescence properties. Significantly, we demonstrate the design of photocatalysts (TiO2/CQDs and SiO2/CQDs complex system) to harness the use of the full spectrum of sunlight (based on the upconversion luminescence properties of CQDs). It can be imagined that judicious cutting of a graphite honeycomb layer into ultrasmall particles can lead to tiny fragments of graphite, yielding CQDs, which may offer a straightforward and facile strategy to prepare high-quality CQDs. Using graphite rods as both anode and cathode, and NaOH/EtOH as electrolyte, we synthesized CQDs with a current intensity of 10–200 mAcm . As a reference, a series of control experiments using acids (e.g. H2SO4/EtOH) as electrolyte yielded no formation of CQDs. This result indicates that alkaline environment is the key factor, and OH group is essential for the formation of CQDs by the electrochemical oxidation process. Figure 1a shows a trans-