Zhifeng Ren

Bio: Zhifeng Ren is an academic researcher from Texas Center for Superconductivity. The author has contributed to research in topics: Thermoelectric effect & Thermoelectric materials. The author has an hindex of 122, co-authored 695 publications receiving 71212 citations. Previous affiliations of Zhifeng Ren include Massachusetts Institute of Technology & University of Cincinnati.

n-type thermoelectric material Mg2Sn0.75Ge0.25 for high power generation

Abstract: Thermoelectric power generation is one of the most promising techniques to use the huge amount of waste heat and solar energy. Traditionally, high thermoelectric figure-of-merit, ZT, has been the only parameter pursued for high conversion efficiency. Here, we emphasize that a high power factor (PF) is equivalently important for high power generation, in addition to high efficiency. A new n-type Mg2Sn-based material, Mg2Sn0.75Ge0.25, is a good example to meet the dual requirements in efficiency and output power. It was found that Mg2Sn0.75Ge0.25 has an average ZT of 0.9 and PF of 52 μW⋅cm−1⋅K−2 over the temperature range of 25–450 °C, a peak ZT of 1.4 at 450 °C, and peak PF of 55 μW⋅cm−1⋅K−2 at 350 °C. By using the energy balance of one-dimensional heat flow equation, leg efficiency and output power were calculated with Th = 400 °C and Tc = 50 °C to be of 10.5% and 6.6 W⋅cm−2 under a temperature gradient of 150 °C⋅mm−1, respectively.

Photoinduced oxygen release and persistent photoconductivity in ZnO nanowires

Abstract: Photoconductivity is studied in individual ZnO nanowires. Under ultraviolet (UV) illumination, the induced photocurrents are observed to persist both in air and in vacuum. Their dependence on UV intensity in air is explained by means of photoinduced surface depletion depth decrease caused by oxygen desorption induced by photogenerated holes. The observed photoresponse is much greater in vacuum and proceeds beyond the air photoresponse at a much slower rate of increase. After reaching a maximum, it typically persists indefinitely, as long as good vacuum is maintained. Once vacuum is broken and air is let in, the photocurrent quickly decays down to the typical air-photoresponse values. The extra photoconductivity in vacuum is explained by desorption of adsorbed surface oxygen which is readily pumped out, followed by a further slower desorption of lattice oxygen, resulting in a Zn-rich surface of increased conductivity. The adsorption-desorption balance is fully recovered after the ZnO surface is exposed to air, which suggests that under UV illumination, the ZnO surface is actively "breathing" oxygen, a process that is further enhanced in nanowires by their high surface to volume ratio.

Atypical Oxygen-Bearing Copper Boosts Ethylene Selectivity toward Electrocatalytic CO2 Reduction.

Abstract: Oxygen-bearing copper (OBC) has been widely studied for enabling the C-C coupling of the electrocatalytic CO2 reduction reaction (CO2RR) since this is a distinctive hallmark of strongly correlated OBC systems and may benefit many other Cu-based catalytic processes. Unresolved problems, however, include the instability of and limited knowledge regarding OBC under realistic operating conditions, raising doubts about its role in CO2RR. Here, an atypical and stable OBC catalyst with a hierarchical pore and nanograin-boundary structure was constructed and was found to exhibit efficient CO2RR for the production of ethylene with a Faradaic efficiency of 45% at a partial current density of 44.7 mA cm-2 in neutral media, and the ethylene partial current density is nearly 26 and 116 times that of oxygen-free copper (OFC) and commercial Cu foam, respectively. More importantly, the structure-activity relationship in CO2RR was explored through a comprehensive analysis of experimental data and computational techniques, thus increasing the fundamental understanding of CO2RR. A systematic characterization analysis suggests that atypical OBC (Cu4O) was formed and that it is stable even at -1.00 V [(vs the reversible hydrogen electrode (RHE)]. Density functional theory calculations show that the atypical OBC enables control over CO adsorption and dimerization, making it possible to implement a preference for the electrosynthesis of ethylene (C2) products. These results provide insight into the synthesis and structural characteristics of OBC as well as its interplay with ethylene selectivity.

Varied morphology carbon nanotubes and method for their manufacture

Abstract: The present invention describes the preparation of carbon nanotubes of varied morphology, catalyst materials for their synthesis. The present invention also describes reactor apparatus and methods of optimizing and controlling process parameters for the manufacture carbon nanotubes with pre-determined morphologies in relatively high purity and in high yields. In particular, the present invention provides methods for the preparation of non-aligned carbon nanotubes with controllable morphologies, catalyst materials and methods for their manufacture.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.