A configuration of all-optical switching based on a Signac loop mirror that incorporates an ytterbium-doped fiber and uniform fiber Bragg grating (FBG) is proposed in this paper. It is found that the transmission spectrum of this structure is the narrow splitting of the reflection spectrum of the FBG. The shift of this ultranarrow transmission spectrum is very sensitive to the intensity of the pump power. Thus, the threshold switching power can be greatly reduced by shifting such narrow transmission spectrum. Compared with the single FBG, the threshold switching power of this configuration is reduced by 4 orders of magnitude. In addition, the results indicate that this optical switching has a high extinction ratio of 20 dB and a ultrafast response time of 3 ns. The operation regime and switching performance under the cross-phase modulation cases are also investigated.

All-optical switching in Sagnac loop mirror containing an ytterbium-doped fiber and fiber Bragg grating

Tribological Behavior of Hybrid (LM25Al + SiC+ TiO2) Metal Matrix Composites☆

Crystal growth and characterization of third order nonlinear optical piperazinium bis(4-hydroxybenzenesulphonate) (P4HBS) single crystal

Laser induced nonlinear absorption coefficient of Brilliant Green solution was measured by single beam open aperture Z-scan technique using a continuous wave He–Ne laser at the wavelength of 632.8 nm. It was found that the material exhibits multiphoton absorption type optical nonlinearity. Significant optical nonlinearity is an indicative that Brilliant Green dye is prominent material for low power nonlinear applications. Ultraviolet–visible and photoluminescence (PL) spectra of Brilliant Green solutions are also recorded. A strong linear absorption band with a peak at 625 nm has been observed, while the PL intensity was found to decrease due to quenching effect on increasing the concentration.

Study of nonlinear optical properties of organic dye by Z-scan technique using He–Ne laser

Nd 3+ -doped lanthanum lead boro-tellurite glass for lasing and amplification applications

The optical performances of the all-optical switching based on Yb3+-doped fiber Bragg grating (FBG) are investigated under the case of self-phase modulation (SPM) and cross-phase modulation (XPM). For the SPM case, the optical bistability of FBG under different parameters is investigated. It shows that the width of the hysteresis loop and threshold switching power are strongly dependent on the fiber grating length, fiber grating detuning, and coupling constant. For the XPM case, the expressions of the threshold switching power in the different detuning range are given. The influence of parameters about different detuning and coupling constant to the threshold switching power and extinction ratio are also studied. In comparison with the SPM case, the switching power of FBG under XPM case can be reduced to less than 20 mW by optimizing the parameters of FBG.

Zhigang Zang

Papers

Analysis of optical switching in a Yb3+-doped fiber Bragg grating by using self-phase modulation and cross-phase modulation.