Zhongbin Zhuang

Bio: Zhongbin Zhuang is an academic researcher from University of Delaware. The author has contributed to research in topics: Catalysis & Hydrogen. The author has an hindex of 14, co-authored 15 publications receiving 3957 citations. Previous affiliations of Zhongbin Zhuang include Beijing University of Chemical Technology.

Efficient water oxidation using nanostructured α-nickel-hydroxide as an electrocatalyst.

Abstract: Electrochemical water splitting is a clean technology that can store the intermittent renewable wind and solar energy in H2 fuels. However, large-scale H2 production is greatly hindered by the sluggish oxygen evolution reaction (OER) kinetics at the anode of a water electrolyzer. Although many OER electrocatalysts have been developed to negotiate this difficult reaction, substantial progresses in the design of cheap, robust, and efficient catalysts are still required and have been considered a huge challenge. Herein, we report the simple synthesis and use of α-Ni(OH)2 nanocrystals as a remarkably active and stable OER catalyst in alkaline media. We found the highly nanostructured α-Ni(OH)2 catalyst afforded a current density of 10 mA cm(-2) at a small overpotential of a mere 0.331 V and a small Tafel slope of ~42 mV/decade, comparing favorably with the state-of-the-art RuO2 catalyst. This α-Ni(OH)2 catalyst also presents outstanding durability under harsh OER cycling conditions, and its stability is much better than that of RuO2. Additionally, by comparing the performance of α-Ni(OH)2 with two kinds of β-Ni(OH)2, all synthesized in the same system, we experimentally demonstrate that α-Ni(OH)2 effects more efficient OER catalysis. These results suggest the possibility for the development of effective and robust OER electrocatalysts by using cheap and easily prepared α-Ni(OH)2 to replace the expensive commercial catalysts such as RuO2 or IrO2.

3D Porous Crystalline Polyimide Covalent Organic Frameworks for Drug Delivery

Abstract: Three-dimensional porous crystalline polyimide covalent organic frameworks (termed PI-COFs) have been synthesized. These PI-COFs feature non- or interpenetrated structures that can be obtained by choosing tetrahedral building units of different sizes. Both PI-COFs show high thermal stability (>450 °C) and surface area (up to 2403 m2 g–1). They also show high loading and good release control for drug delivery applications.

Correlating hydrogen oxidation and evolution activity on platinum at different pH with measured hydrogen binding energy.

Abstract: The hydrogen oxidation/evolution reactions are two of the most fundamental reactions in distributed renewable electrochemical energy conversion and storage systems. The identification of the reaction descriptor is therefore of critical importance for the rational catalyst design and development. Here we report the correlation between hydrogen oxidation/evolution activity and experimentally measured hydrogen binding energy for polycrystalline platinum examined in several buffer solutions in a wide range of electrolyte pH from 0 to 13. The hydrogen oxidation/evolution activity obtained using the rotating disk electrode method is found to decrease with the pH, while the hydrogen binding energy, obtained from cyclic voltammograms, linearly increases with the pH. Correlating the hydrogen oxidation/evolution activity to the hydrogen binding energy renders a monotonic decreasing hydrogen oxidation/evolution activity with the hydrogen binding energy, strongly supporting the hypothesis that hydrogen binding energy is the sole reaction descriptor for the hydrogen oxidation/evolution activity on monometallic platinum.

3D Microporous Base‐Functionalized Covalent Organic Frameworks for Size‐Selective Catalysis

Abstract: The design and synthesis of 3D covalent organic frameworks (COFs) have been considered a challenge, and the demonstrated applications of 3D COFs have so far been limited to gas adsorption. Herein we describe the design and synthesis of two new 3D microporous base-functionalized COFs, termed BF-COF-1 and BF-COF-2, by the use of a tetrahedral alkyl amine, 1,3,5,7-tetraaminoadamantane (TAA), combined with 1,3,5-triformylbenzene (TFB) or triformylphloroglucinol (TFP). As catalysts, both BF-COFs showed remarkable conversion (96% for BF-COF-1 and 98% for BF-COF-2), high size selectivity, and good recyclability in base-catalyzed Knoevenagel condensation reactions. This study suggests that porous functionalized 3D COFs could be a promising new class of shape-selective catalysts.

Universal dependence of hydrogen oxidation and evolution reaction activity of platinum-group metals on pH and hydrogen binding energy

Abstract: Understanding how pH affects the activity of hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) is key to developing active, stable, and affordable HOR/HER catalysts for hydroxide exchange membrane fuel cells and electrolyzers. A common linear correlation between hydrogen binding energy (HBE) and pH is observed for four supported platinum-group metal catalysts (Pt/C, Ir/C, Pd/C, and Rh/C) over a broad pH range (0 to 13), suggesting that the pH dependence of HBE is metal-independent. A universal correlation between exchange current density and HBE is also observed on the four metals, indicating that they may share the same elementary steps and rate-determining steps and that the HBE is the dominant descriptor for HOR/HER activities. The onset potential of CO stripping on the four metals decreases with pH, indicating a stronger OH adsorption, which provides evidence against the promoting effect of adsorbed OH on HOR/HER.

Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts

Abstract: Although sunlight-driven water splitting is a promising route to sustainable hydrogen fuel production, widespread implementation is hampered by the expense of the necessary photovoltaic and photoelectrochemical apparatus. Here, we describe a highly efficient and low-cost water-splitting cell combining a state-of-the-art solution-processed perovskite tandem solar cell and a bifunctional Earth-abundant catalyst. The catalyst electrode, a NiFe layered double hydroxide, exhibits high activity toward both the oxygen and hydrogen evolution reactions in alkaline electrolyte. The combination of the two yields a water-splitting photocurrent density of around 10 milliamperes per square centimeter, corresponding to a solar-to-hydrogen efficiency of 12.3%. Currently, the perovskite instability limits the cell lifetime.

Ultrathin metal–organic framework nanosheets for electrocatalytic oxygen evolution

Abstract: The design and synthesis of efficient electrocatalysts are important for electrochemical conversion technologies. The oxygen evolution reaction (OER) is a key process in such conversions, having applications in water splitting and metal–air batteries. Here, we report ultrathin metal–organic frameworks (MOFs) as promising electrocatalysts for the OER in alkaline conditions. Our as-prepared ultrathin NiCo bimetal–organic framework nanosheets on glassy-carbon electrodes require an overpotential of 250 mV to achieve a current density of 10 mA cm−2. When the MOF nanosheets are loaded on copper foam, this decreases to 189 mV. We propose that the surface atoms in the ultrathin MOF sheets are coordinatively unsaturated—that is, they have open sites for adsorption—as evidenced by a suite of measurements, including X-ray spectroscopy and density-functional theory calculations. The findings suggest that the coordinatively unsaturated metal atoms are the dominating active centres and the coupling effect between Ni and Co metals is crucial for tuning the electrocatalytic activity. Efficient electrocatalysts for the oxygen–evolution reaction are desired due to their importance in applications such as water splitting and metal–air batteries. Here, the authors engineer ultrathin metal–organic frameworks that require low overpotential to generate oxygen from alkaline media.

Identification of Highly Active Fe Sites in (Ni,Fe)OOH for Electrocatalytic Water Splitting

Abstract: Highly active catalysts for the oxygen evolution reaction (OER) are required for the development of photoelectrochemical devices that generate hydrogen efficiently from water using solar energy. Here, we identify the origin of a 500-fold OER activity enhancement that can be achieved with mixed (Ni,Fe)oxyhydroxides (Ni(1-x)Fe(x)OOH) over their pure Ni and Fe parent compounds, resulting in one of the most active currently known OER catalysts in alkaline electrolyte. Operando X-ray absorption spectroscopy (XAS) using high energy resolution fluorescence detection (HERFD) reveals that Fe(3+) in Ni(1-x)Fe(x)OOH occupies octahedral sites with unusually short Fe-O bond distances, induced by edge-sharing with surrounding [NiO6] octahedra. Using computational methods, we establish that this structural motif results in near optimal adsorption energies of OER intermediates and low overpotentials at Fe sites. By contrast, Ni sites in Ni(1-x)Fe(x)OOH are not active sites for the oxidation of water.

Recent Trends and Perspectives in Electrochemical Water Splitting with an Emphasis on Sulfide, Selenide, and Phosphide Catalysts of Fe, Co, and Ni: A Review

Abstract: Increasing demand for finding eco-friendly and everlasting energy sources is now totally depending on fuel cell technology. Though it is an eco-friendly way of producing energy for the urgent requirements, it needs to be improved to make it cheaper and more eco-friendly. Although there are several types of fuel cells, the hydrogen (H2) and oxygen (O2) fuel cell is the one with zero carbon emission and water as the only byproduct. However, supplying fuels in the purest form (at least the H2) is essential to ensure higher life cycles and less decay in cell efficiency. The current large-scale H2 production is largely dependent on steam reforming of fossil fuels, which generates CO2 along with H2 and the source of which is going to be depleted. As an alternate, electrolysis of water has been given greater attention than the steam reforming. The reasons are as follows: the very high purity of the H2 produced, the abundant source, no need for high-temperature, high-pressure reactors, and so on. In earlier days,...

The atom, the molecule, and the covalent organic framework

Abstract: Just over a century ago, Lewis published his seminal work on what became known as the covalent bond, which has since occupied a central role in the theory of making organic molecules. With the advent of covalent organic frameworks (COFs), the chemistry of the covalent bond was extended to two- and three-dimensional frameworks. Here, organic molecules are linked by covalent bonds to yield crystalline, porous COFs from light elements (boron, carbon, nitrogen, oxygen, and silicon) that are characterized by high architectural and chemical robustness. This discovery paved the way for carrying out chemistry on frameworks without losing their porosity or crystallinity, and in turn achieving designed properties in materials. The recent union of the covalent and the mechanical bond in the COF provides the opportunity for making woven structures that incorporate flexibility and dynamics into frameworks.