Zhongyang Cheng

Bio: Zhongyang Cheng is an academic researcher from Auburn University. The author has contributed to research in topics: Dielectric & Electroactive polymers. The author has an hindex of 39, co-authored 225 publications receiving 6902 citations. Previous affiliations of Zhongyang Cheng include Xi'an Jiaotong University & Foundation University, Islamabad.

An all-organic composite actuator material with a high dielectric constant

Abstract: Electroactive polymers (EAPs) can behave as actuators, changing their shape in response to electrical stimulation. EAPs that are controlled by external electric fields--referred to here as field-type EAPs--include ferroelectric polymers, electrostrictive polymers, dielectric elastomers and liquid crystal polymers. Field-type EAPs can exhibit fast response speeds, low hysteresis and strain levels far above those of traditional piezoelectric materials, with elastic energy densities even higher than those of piezoceramics. However, these polymers also require a high field (>70 V micro m(-1)) to generate such high elastic energy densities (>0.1 J cm(-3); refs 4, 5, 9, 10). Here we report a new class of all-organic field-type EAP composites, which can exhibit high elastic energy densities induced by an electric field of only 13 V micro m(-1). The composites are fabricated from an organic filler material possessing very high dielectric constant dispersed in an electrostrictive polymer matrix. The composites can exhibit high net dielectric constants while retaining the flexibility of the matrix. These all-organic actuators could find applications as artificial muscles, 'smart skins' for drag reduction, and in microfluidic systems for drug delivery.

High-dielectric-constant ceramic-powder polymer composites

Abstract: A ceramic-powder polymer composite, making use of a relaxor ferroelectric polymer that has a high room-temperature dielectric constant as the matrix, is developed. The experimental data show that the dielectric constant of the composites with Pb(Mg1/3Nb2/3)O3–PbTiO3 powders can reach more than 250 with weak temperature dependence. In addition, the composites under a proper preparation procedure exhibit a high breakdown field strength (>120 MV/m), leading to a maximum energy storage density of more than 15 J/cm3. Experimental results also indicate that the high electron irradiation does not have much effect on the dielectric behavior of Pb(Mg1/3Nb2/3)O3–PbTiO3 powders, possibly due to the relaxor nature of the ceramic.

Ferroelectric and electromechanical properties of poly(vinylidene-fluoride-trifluoroethylene-chlorotrifluoroethylene) terpolymer

Abstract: This letter reports the ferroelectric and electromechanical properties of a class of ferroelectric polymer, poly(vinylidene-fluoride–trifluoroethylene–chlorotrifluoroethylene) terpolymer, which exhibits a slim polarizationhysteresis loop and a high electrostrictive strain at room temperature. The dielectric and polarization behaviors of this terpolymer are typical of the ferroelectric relaxor. The x-ray and Fourier transform infrared results reveal that the random incorporation of bulky chlorotrifluoroethylene (CTFE) ter-monomers into polymer chains causes disordering of the ferroelectric phase. Furthermore, CTFE also acts as random defect fields which randomize the inter- and intrachain polar coupling, resulting in the observed ferroelectric relaxor behavior.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Review of progress in shape-memory polymers

Abstract: Shape-memory polymers (SMPs) have attracted significant attention from both industrial and academic researchers due to their useful and fascinating functionality. This review thoroughly examines progress in shape-memory polymers, including the very recent past, achieved by numerous groups around the world and our own research group. Considering all of the shape-memory polymers reviewed, we identify a classification scheme wherein nearly all SMPs may be associated with one of four classes in accordance with their shape fixing and recovering mechanisms and as dictated by macromolecular details. We discuss how the described shape-memory polymers show great potential for diverse applications, including in the medical arena, sensors, and actuators.