Graphene has attracted tremendous research interest in recent years, owing to its exceptional properties. The scaled-up and reliable production of graphene derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), offers a wide range of possibilities to synthesize graphene-based functional materials for various applications. This critical review presents and discusses the current development of graphene-based composites. After introduction of the synthesis methods for graphene and its derivatives as well as their properties, we focus on the description of various methods to synthesize graphene-based composites, especially those with functional polymers and inorganic nanostructures. Particular emphasis is placed on strategies for the optimization of composite properties. Lastly, the advantages of graphene-based composites in applications such as the Li-ion batteries, supercapacitors, fuel cells, photovoltaic devices, photocatalysis, as well as Raman enhancement are described (279 references).

/pdf/graphene-based-composites-540z2xd3o0.pdf

Graphene-based composites

Graphene based materials: Past, present and future

Graphene has emerged as a subject of enormous scientific interest due to its exceptional electron transport, mechanical properties, and high surface area. When incorporated appropriately, these atomically thin carbon sheets can significantly improve physical properties of host polymers at extremely small loading. We first review production routes to exfoliated graphite with an emphasis on top-down strategies starting from graphite oxide, including advantages and disadvantages of each method. Then solvent- and melt-based strategies to disperse chemically or thermally reduced graphene oxide in polymers are discussed. Analytical techniques for characterizing particle dimensions, surface characteristics, and dispersion in matrix polymers are also introduced. We summarize electrical, thermal, mechanical, and gas barrier properties of the graphene/polymer nanocomposites. We conclude this review listing current challenges associated with processing and scalability of graphene composites and future perspectives f...

/pdf/graphene-polymer-nanocomposites-19884oy559.pdf

Graphene/Polymer Nanocomposites

Carbon nanotubes (CNTs) hold the promise of delivering exceptional mechanical properties and multi-functional characteristics. Ever-increasing interest in applying CNTs in many different fields has led to continued efforts to develop dispersion and functionalization techniques. To employ CNTs as effective reinforcement in polymer nanocomposites, proper dispersion and appropriate interfacial adhesion between the CNTs and polymer matrix have to be guaranteed. This paper reviews the current understanding of CNTs and CNT/polymer nanocomposites with two particular topics: (i) the principles and techniques for CNT dispersion and functionalization and (ii) the effects of CNT dispersion and functionalization on the properties of CNT/polymer nanocomposites. The fabrication techniques and potential applications of CNT/polymer nanocomposites are also highlighted.

Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review

http://staff.ulsu.ru/moliver/ref/polymers/pott11.pdf

Graphene-based polymer nanocomposites

In this study, the mechanical properties of epoxy nanocomposites with graphene platelets, single-walled carbon nanotubes, and multi-walled carbon nanotube additives were compared at a nanofiller weight fraction of 0.1 ± 0.002%. The mechanical properties measured were the Young’s modulus, ultimate tensile strength, fracture toughness, fracture energy, and the material’s resistance to fatigue crack propagation. The results indicate that graphene platelets significantly out-perform carbon nanotube additives. The Young’s modulus of the graphene nanocomposite was ∼31% greater than the pristine epoxy as compared to ∼3% increase for single-walled carbon nanotubes. The tensile strength of the baseline epoxy was enhanced by ∼40% with graphene platelets compared to ∼14% improvement for multi-walled carbon nanotubes. The mode I fracture toughness of the nanocomposite with graphene platelets showed ∼53% increase over the epoxy compared to ∼20% improvement for multi-walled carbon nanotubes. The fatigue resistance resu...

Enhanced mechanical properties of nanocomposites at low graphene content.

Graphene, a single-atom-thick sheet of sp-bonded carbon atoms, has generatedmuch interest due to its high specific area and novel mechanical, electrical, and thermal properties. Recent advances in the production of bulk quantities of exfoliated graphene sheets from graphite have enabled the fabrication of graphene–polymer composites. Such composites show tremendous potential for mechanical-property enhancement due to their combination of high specific surface area, strong nanofiller–matrix adhesion and the outstanding mechanical properties of the sp carbon bonding network in graphene. Graphene fillers have been successfully dispersed in poly(styrene), poly(acrylonitrile) and poly(methyl methacrylate) matrices and the responses of their Young’s modulus, ultimate tensile strength, andglass-transition temperaturehave been characterized. However, to the best of our knowledge there is no report on the fracture toughness and fatigue properties of graphene–polymer composites. Fracture toughness describes the ability of a material containing a crack to resist fracture and it is a critically important material property for design applications. Fatigue involves dynamic propagation of cracks under cyclic loading and it is one of the primary causes of catastrophic failure in structural materials. Consequently, the material’s resistance to fracture and fatigue crack propagation are of paramount importance to prevent failure. Herein we report the fracture toughness, fracture energy, and fatigue properties of an epoxy polymer reinforced with various weight fractions of functionalized graphene sheets. Remarkably, only 0.125% weight of functionalized graphene sheets was observed to increase the fracture toughness of the pristine (unfilled) epoxy by 65% and the fracture energy by 115%.Toachievecomparableenhancement,carbonnanotube (CNT) and nanoparticle epoxy composites require one to two orders of magnitude larger weight fraction of nanofillers. Under fatigue conditions, incorporation of 0.125% weight of functionalized graphene sheets drastically reduced the rate of crack propagation in the epoxy 25-fold. Fractography analysis

Fracture and fatigue in graphene nanocomposites

Graphene oxide was prepared by ultrasonication of completely oxidized graphite and used to improve the flame retardancy of epoxy. The epoxy/graphene oxide nanocomposite was studied in terms of exfoliation/dispersion, thermal stability and flame retardancy. X-ray diffraction and transmission electron microscopy confirmed the exfoliation of the graphene oxide nanosheets in epoxy matrix. Cone calorimeter measurements showed that the time to ignition of the epoxy/graphene oxide nanocomposite was longer than that of neat epoxy. The heat release rate curve of the nanocomposite was broadened compared to that of neat epoxy and the peak heat release rate decreased as well.

Zhou Wang

Papers

Enhanced mechanical properties of nanocomposites at low graphene content.

Fracture and fatigue in graphene nanocomposites

Dispersion of graphene oxide and its flame retardancy effect on epoxy nanocomposites