Ziqiang Shao

Bio: Ziqiang Shao is an academic researcher from Beijing Institute of Technology. The author has contributed to research in topics: Supercapacitor & Electrospinning. The author has an hindex of 28, co-authored 108 publications receiving 2297 citations.

Cellulose nanofiber–graphene all solid-state flexible supercapacitors

Abstract: Cellulose nanofibers are selected as nano-spacers, electrolyte nano-reservoirs and hierarchical nanostructure makers of CNF–RGO hybrid aerogel. The CNF–RGO hybrid aerogel based flexible supercapacitor exhibits high capacitance (207 F g−1). Taking its higher capacitance, low cost and environmentally friendly nature, they have great potential for use in flexible supercapacitors.

Cellulose nanofibers/multi-walled carbon nanotube nanohybrid aerogel for all-solid-state flexible supercapacitors

Abstract: In recent years, much effort has been dedicated to achieve environmentally friendly, low cost, and excellent performance energy storage devices. In this work, cellulose nanofibers (CNFs)/multi-walled carbon nanotubes (MWCNTs) hybrid aerogels are prepared from CNFs/MWCNTs hydrogels by supercritical CO2 drying using CNFs as an effective, environmentally friendly, and steady dispersant of MWCNTs. All-solid-state flexible supercapacitors are fabricated using CNFs/MWCNTs hybrid aerogel film as the electrode material and charge collector. One-dimensional CNFs can effectively prevent the aggregation of MWCNTs, significantly enhance the re-wettability, and improve the utilization efficiency of the mesopores. Therefore, CNFs/MWCNTs hybrid aerogel film-based all-solid-state flexible supercapacitors exhibit excellent electrochemical properties: the specific capacitance is about 178 F g−1. The flexible supercapacitors also exhibit excellent cyclic stability. Our work provides a novel method using low cost, and environmentally friendly CNFs to realize the full potential of the MWCNTs in an assembled bulk form. Taking its low cost and environmentally friendliness, CNFs/MWCNTs hybrid aerogel has great potential as the electrode material for all-solid-state flexible supercapacitors.

Paper-based transparent flexible thin film supercapacitors

Abstract: Paper-based transparent flexible thin film supercapacitors were fabricated using CNF–[RGO]n hybrid paper as an electrode material and charge collector. Owing to the self-anti-stacking of distorted RGO nanosheets and internal electrolyte nanoscale-reservoirs, the device exhibited good electrochemical performance (about 1.73 mF cm−2), and a transmittance of about 56% (at 550 nm).

Intrinsic ripples in graphene

Abstract: The stability of two-dimensional (2D) layers and membranes is subject of a long standing theoretical debate. According to the so called Mermin-Wagner theorem, long wavelength fluctuations destroy the long-range order for 2D crystals. Similarly, 2D membranes embedded in a 3D space have a tendency to be crumpled. These dangerous fluctuations can, however, be suppressed by anharmonic coupling between bending and stretching modes making that a two-dimensional membrane can exist but should present strong height fluctuations. The discovery of graphene, the first truly 2D crystal and the recent experimental observation of ripples in freely hanging graphene makes these issues especially important. Beside the academic interest, understanding the mechanisms of stability of graphene is crucial for understanding electronic transport in this material that is attracting so much interest for its unusual Dirac spectrum and electronic properties. Here we address the nature of these height fluctuations by means of straightforward atomistic Monte Carlo simulations based on a very accurate many-body interatomic potential for carbon. We find that ripples spontaneously appear due to thermal fluctuations with a size distribution peaked around 70 \AA which is compatible with experimental findings (50-100 \AA) but not with the current understanding of stability of flexible membranes. This unexpected result seems to be due to the multiplicity of chemical bonding in carbon.

Towards flexible solid-state supercapacitors for smart and wearable electronics

Abstract: Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials The next sections briefly summarise the latest progress in flexible electrodes (ie, freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (ie, aqueous, organic, ionic liquids and redox-active gels) Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal–organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed The final section highlights current challenges and future perspectives on research in this thriving field

Battery-Supercapacitor Hybrid Devices: Recent Progress and Future Prospects.

Abstract: Design and fabrication of electrochemical energy storage systems with both high energy and power densities as well as long cycling life is of great importance. As one of these systems, Battery-supercapacitor hybrid device (BSH) is typically constructed with a high-capacity battery-type electrode and a high-rate capacitive electrode, which has attracted enormous attention due to its potential applications in future electric vehicles, smart electric grids, and even miniaturized electronic/optoelectronic devices, etc. With proper design, BSH will provide unique advantages such as high performance, cheapness, safety, and environmental friendliness. This review first addresses the fundamental scientific principle, structure, and possible classification of BSHs, and then reviews the recent advances on various existing and emerging BSHs such as Li-/Na-ion BSHs, acidic/alkaline BSHs, BSH with redox electrolytes, and BSH with pseudocapacitive electrode, with the focus on materials and electrochemical performances. Furthermore, recent progresses in BSH devices with specific functionalities of flexibility and transparency, etc. will be highlighted. Finally, the future developing trends and directions as well as the challenges will also be discussed; especially, two conceptual BSHs with aqueous high voltage window and integrated 3D electrode/electrolyte architecture will be proposed.

Flexible solid-state supercapacitors: design, fabrication and applications

Abstract: Increasing power and energy demands for next-generation portable and flexible electronics such as roll-up displays, photovoltaic cells, and wearable devices have stimulated intensive efforts to explore flexible, lightweight and environmentally friendly energy storage devices. Flexible solid-state supercapacitors (SCs) have attracted increasing interest because they can provide substantially higher specific/volumetric energy density compared to conventional capacitors. Additionally, flexible solid-state SCs are typically small in size, highly reliable, light-weight, easy to handle, and have a wide range of operation temperatures. In this regard, solid-state SCs hold great promise as new energy storage devices for flexible and wearable electronics. In this article, we review recent achievements in the design, fabrication and characterization of flexible solid-state SCs. Moreover, we also discuss the current challenges and future opportunities for the development of high-performance flexible solid-state SCs.

Review of Hydrogels and Aerogels Containing Nanocellulose

Abstract: Naturally derived cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) are emerging nanomaterials that display high strength, high surface area, and tunable surface chemistry, allowing for controlled interactions with polymers, nanoparticles, small molecules, and biological materials. Industrial production of nanocelluloses is increasing rapidly with several companies already producing on the tons-per-day scale, intensifying the quest for viable products across many sectors. While the hydrophilicity of the nanocellulose interface has posed a challenge to the use of CNCs and CNFs as reinforcing agents in conventional plastics, it is a significant benefit for creating reinforced or structured hydrogel composites (or, when dried, aerogels) exhibiting both mechanical reinforcement and a host of other desirable properties. In this context, this Review describes the quickly growing field of hydrogels and aerogels incorporating nanocelluloses; over 200 references are summarized in comprehensive tables ...