Zuoli He

Bio: Zuoli He is an academic researcher from Shandong University. The author has contributed to research in topics: Photocatalysis & Materials science. The author has an hindex of 23, co-authored 67 publications receiving 1616 citations. Previous affiliations of Zuoli He include Shaanxi University of Science and Technology & Pohang University of Science and Technology.

Highly stretchable multi-walled carbon nanotube/thermoplastic polyurethane composite fibers for ultrasensitive, wearable strain sensors

Abstract: Here, we report a novel highly sensitive wearable strain sensor based on a highly stretchable multi-walled carbon nanotube (MWCNT)/Thermoplastic Polyurethane (TPU) fiber obtained via a wet spinning process. The MWCNT/TPU fiber showed the highest tensile strength and ultra-high sensitivity with a gauge factor (GF) of approximately 2800 in the strain range of 5–100%. Due to its high strain sensitivity of conductivity, this CNT-reinforced composite fiber was able to be used to monitor the weight and shape of an object based on the 2D mapping of resistance changes. Moreover, the composite fiber was able to be stitched onto a highly stretchable elastic bandage using a sewing machine to produce a wearable strain sensor for the detection of diverse human motions. We also demonstrated the detection of finger motion by fabricating a smart glove at the joints. Due to its scalable production process, high stretchability and ultrasensitivity, the MWCNT/TPU fiber may open a new avenue for the fabrication of next-generation stretchable textile-based strain sensors.

Photocatalytic Degradation of Methyl Orange over Nitrogen–Fluorine Codoped TiO2 Nanobelts Prepared by Solvothermal Synthesis

Abstract: Anatase type nitrogen–fluorine (N–F) codoped TiO2 nanobelts were prepared by a solvothermal method in which amorphous titania microspheres were used as the precursors. The as-prepared TiO2 nanobelts are composed of thin narrow nanobelts and it is noted that there are large amount of wormhole-like mesopores on these narrow nanobelts. Photocatalytic activity of the N–F codoped TiO2 nanobelts was measured by the reaction of photocatalytic degradation of methyl orange. Results indicate that the photocatalytic activity of the N–F codoped TiO2 nanobelts is higher than that of P25, which is mainly ascribed to wormhole-like mesopores like prison, larger surface area, and enhanced absorption of light due to N–F codoping. Interestingly, it is also found that the photocatalytic activity can be further enhanced when tested in a new testing method because more photons can be captured by the nanobelts to stimulate the formation of the hole–electron pair.

Principles and mechanisms of photocatalytic dye degradation on TiO 2 based photocatalysts: a comparative overview

Abstract: The total annual production of synthetic dye is more than 7 × 105 tons. Annually, through only textile waste effluents, around one thousand tons of non-biodegradable textile dyes are discharged into natural streams and water bodies. Therefore, with growing environmental concerns and environmental awareness there is a need for the removal of dyes from local and industrial water effluents with a cost effective technology. In general, these dyes have been found to be resistant to biological as well as physical treatment technologies. In this regard, heterogeneous advanced oxidation processes (AOPs), involving photo-catalyzed degradation of dyes using semiconductor nanoparticles is considered as an efficient cure for dye pollution. In the last two decades TiO2 has received considerable interest because of its high potential as a photocatalyst to degrade a wide range of organic material including dyes. This review starts with (i) a brief overview on dye pollution, dye classification and dye decolourization/degradation strategies; (ii) focuses on the mechanisms involved in comparatively well understood TiO2 photocatalysts and (iii) discusses recent advancements to enhance TiO2 photocatalytic efficiency by (a) doping with metals, non-metals, transition metals, noble metals and lanthanide ions, (b) structural modifications of TiO2 and (c) immobilization of TiO2 by using various supports to make it a flexible and cost-effective commercial dye treatment technology.

A review of one-dimensional TiO2 nanostructured materials for environmental and energy applications

Abstract: One-dimensional TiO2 (1D TiO2) nanomaterials with unique structural and functional properties have been extensively used in various fields including photocatalytic degradation of pollutants, photocatalytic CO2 reduction into energy fuels, water splitting, solar cells, supercapacitors and lithium-ion batteries. In the past few decades, 1D TiO2 nanostructured materials with a well-controlled size and morphology have been designed and synthesized. Compared to 0D and 2D nanostructures, more attention has been paid to 1D TiO2 nanostructures due to their high aspect ratio, large specific surface area, and excellent electronic or ionic charge transport properties. In this review, we present the crystal structure of TiO2 and the latest development on the fabrication of 1D TiO2 nanostructured materials. Besides, we will look into some critical engineering strategies that give rise to the excellent properties of 1D TiO2 nanostructures such as improved enlargement of the surface area, light absorption and efficient separation of electrons/holes that benefit their potential applications. Moreover, their corresponding environmental and energy applications are described and discussed. With the fast development of the current economy and technology, more and more effort will be put into endowing TiO2-based materials with advanced functionalities and other promising applications.

Nickel hydroxides and related materials: a review of their structures, synthesis and properties.

Abstract: This review article summarizes the last few decades of research on nickel hydroxide, an important material in physics and chemistry, that has many applications in engineering including, significantly, batteries. First, the structures of the two known polymorphs, denoted as α-Ni(OH)2 and β-Ni(OH)2, are described. The various types of disorder, which are frequently present in nickel hydroxide materials, are discussed including hydration, stacking fault disorder, mechanical stresses and the incorporation of ionic impurities. Several related materials are discussed, including intercalated α-derivatives and basic nickel salts. Next, a number of methods to prepare, or synthesize, nickel hydroxides are summarized, including chemical precipitation, electrochemical precipitation, sol-gel synthesis, chemical ageing, hydrothermal and solvothermal synthesis, electrochemical oxidation, microwave-assisted synthesis, and sonochemical methods. Finally, the known physical properties of the nickel hydroxides are reviewed, including their magnetic, vibrational, optical, electrical and mechanical properties. The last section in this paper is intended to serve as a summary of both the potentially useful properties of these materials and the methods for the identification and characterization of 'unknown' nickel hydroxide-based samples.