Example of Journal of Hydraulic Engineering format
Recent searches

Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
Look Inside
Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format Example of Journal of Hydraulic Engineering format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
open access Open Access

Journal of Hydraulic Engineering — Template for authors

Categories Rank Trend in last 3 yrs
Civil and Structural Engineering #81 of 318 down down by 12 ranks
Mechanical Engineering #158 of 596 down down by 9 ranks
Water Science and Technology #62 of 225 up up by 7 ranks
journal-quality-icon Journal quality:
Good
calendar-icon Last 4 years overview: 500 Published Papers | 2036 Citations
indexed-in-icon Indexed in: Scopus
last-updated-icon Last updated: 04/06/2020
Related journals
Insights
General info
Top papers
Popular templates
Get started guide
Why choose from SciSpace
FAQ

Related Journals

open access Open Access
recommended Recommended

IWA Publishing

Quality:  
High
CiteRatio: 15.6
SJR: 3.099
SNIP: 2.64
open access Open Access

Elsevier

Quality:  
High
CiteRatio: 4.7
SJR: 0.677
SNIP: 1.39

Journal Performance & Insights

CiteRatio

SCImago Journal Rank (SJR)

Source Normalized Impact per Paper (SNIP)

A measure of average citations received per peer-reviewed paper published in the journal.

Measures weighted citations received by the journal. Citation weighting depends on the categories and prestige of the citing journal.

Measures actual citations received relative to citations expected for the journal's category.

4.1

5% from 2019

CiteRatio for Journal of Hydraulic Engineering from 2016 - 2020
Year Value
2020 4.1
2019 3.9
2018 3.2
2017 2.9
2016 3.1
graph view Graph view
table view Table view

0.76

16% from 2019

SJR for Journal of Hydraulic Engineering from 2016 - 2020
Year Value
2020 0.76
2019 0.902
2018 0.828
2017 1.023
2016 0.872
graph view Graph view
table view Table view

1.547

8% from 2019

SNIP for Journal of Hydraulic Engineering from 2016 - 2020
Year Value
2020 1.547
2019 1.436
2018 1.804
2017 1.666
2016 1.671
graph view Graph view
table view Table view

insights Insights

  • CiteRatio of this journal has increased by 5% in last years.
  • This journal’s CiteRatio is in the top 10 percentile category.

insights Insights

  • SJR of this journal has decreased by 16% in last years.
  • This journal’s SJR is in the top 10 percentile category.

insights Insights

  • SNIP of this journal has increased by 8% in last years.
  • This journal’s SNIP is in the top 10 percentile category.

Journal of Hydraulic Engineering

Guideline source: View

All company, product and service names used in this website are for identification purposes only. All product names, trademarks and registered trademarks are property of their respective owners.

Use of these names, trademarks and brands does not imply endorsement or affiliation. Disclaimer Notice

American Society of Civil Engineers

Journal of Hydraulic Engineering

The Journal of Hydraulic Engineering accepts original contributions that describe the analysis and solutions of problems in hydraulic engineering. Technical Notes may present a problem, without solution, of common interest. Topics range from flows in closed conduits to free-su...... Read More

i
Last updated on
03 Jun 2020
i
ISSN
0733-9429
i
Acceptance Rate
Not Provided
i
Frequency
Monthly
i
Open Access
Not Provided
i
Sherpa RoMEO Archiving Policy
Green faq
i
Plagiarism Check
Available via Turnitin
i
Endnote Style
Download Available
i
Bibliography Name
ASCE Custom Citation
i
Citation Type
Author Year
(Blonder et al. 1982)
i
Bibliography Example
Blonder, G. E., Tinkham, M., and Klapwijk, T. M. (1982). “Transition from metallic to tunneling regimes in superconducting microconstrictions: Excess current, charge imbalance, and supercurrent conversion.” Phys. Rev. B, 25(7), 4515–4532.

Top papers written in this journal

Journal Article DOI: 10.1061/(ASCE)0733-9429(1984)110:10(1431)
Sediment transport; Part I, Bed load transport

Abstract:

A method is presented which enables the computation of the bed-load transport as the product of the saltation height, the particle velocity and the bed-load concentration. The equations of motions for a solitary particle are solved numerically to determine the saltation height and particle velocity. Experiments with gravel pa... A method is presented which enables the computation of the bed-load transport as the product of the saltation height, the particle velocity and the bed-load concentration. The equations of motions for a solitary particle are solved numerically to determine the saltation height and particle velocity. Experiments with gravel particles (transported as bed load) are selected to calibrate the mathematical model using the lift coefficient as a free parameter. The model is used to compute the saltation heights and lengths for a range of flow conditions. The computational results are used to determine simple relationships for the saltation characteristics. Measured transport rates of the bed load are used to compute the sediment concentration in the bed-load layer. A simple expression specifying the bed-load concentration as a function of the flow and sediment conditions is proposed. A verification analysis using about 600 (alternative) data shows that about 77% of the predicted bed-load-transport rates are within 0.5 and 2 times the observed values. read more read less

Topics:

Saltation (geology) (66%)66% related to the paper, Bed material load (64%)64% related to the paper, Bed load (60%)60% related to the paper, Stream load (58%)58% related to the paper, Bedform (57%)57% related to the paper
1,561 Citations
Journal Article DOI: 10.1061/(ASCE)0733-9429(1984)110:11(1613)
Sediment Transport, Part II: Suspended Load Transport

Abstract:

A method is presented which enables the computation of the suspended load as the depth-integration of the product of the local concentration and flow velocity. The method is based on the computation of the reference concentration from the bed-load transport. Measured concentration profiles have been used for calibration. New ... A method is presented which enables the computation of the suspended load as the depth-integration of the product of the local concentration and flow velocity. The method is based on the computation of the reference concentration from the bed-load transport. Measured concentration profiles have been used for calibration. New relationships are proposed to represent the size gradation of the bed material and the damping of the turbulence by the sediment particles. A verification analysis using about 800 data shows that about 76% of the predicted values are within 0.5 and 2 times the measured values. read more read less

Topics:

Bed material load (65%)65% related to the paper, Suspended load (64%)64% related to the paper, Bed load (61%)61% related to the paper, Rouse number (58%)58% related to the paper, Sediment transport (56%)56% related to the paper
1,448 Citations
Journal Article DOI: 10.1061/(ASCE)0733-9429(2002)128:1(117)
Despiking Acoustic Doppler Velocimeter Data
Derek G. Goring1, Vladimir Nikora1

Abstract:

A new method for detecting spikes in acoustic Doppler velocimeter data sequences is suggested. The method combines three concepts: (1) that differentiation enhances the high frequency portion of a signal, (2) that the expected maximum of a random series is given by the Universal threshold, and (3) that good data cluster in a ... A new method for detecting spikes in acoustic Doppler velocimeter data sequences is suggested. The method combines three concepts: (1) that differentiation enhances the high frequency portion of a signal, (2) that the expected maximum of a random series is given by the Universal threshold, and (3) that good data cluster in a dense cloud in phase space or Poincare maps. These concepts are used to construct an ellipsoid in three-dimensional phase space, then points lying outside the ellipsoid are designated as spikes. The new method is shown to have superior performance to various other methods and it has the added advantage that it requires no parameters. Several methods for replacing sequences of spurious data are presented. A polynomial fitted to good data on either side of the spike event, then interpolated across the event, is preferred by the authors. read more read less

Topics:

Doppler effect (53%)53% related to the paper, Ellipsoid (51%)51% related to the paper, Acoustic Doppler velocimetry (51%)51% related to the paper
1,247 Citations
Journal Article DOI: 10.1061/JYCEAJ.0001165
Erosion and Deposition of Cohesive Soils
Emmanuel Partheniades1

Abstract:

The effects of shear stress, suspended sediment concentration, and shear strength of bed on the erosion rates of a cohesive bed in an open channel with salt water have been investigated. The deposition rates of suspended cohesive sediment and the patterns of bed erosion have been studied to a lesser extent. For the experiment... The effects of shear stress, suspended sediment concentration, and shear strength of bed on the erosion rates of a cohesive bed in an open channel with salt water have been investigated. The deposition rates of suspended cohesive sediment and the patterns of bed erosion have been studied to a lesser extent. For the experimental range the erosion rates were found to be independent of the shear strength of the bed and the concentration of suspended sediment. They depend strongly on the bed shear stress. The minimum shear stresses for initiation of erosion were also found to be independent of the shear strength of bed. There seems to exist a critical velocity for the clay part of suspended sediment, above which all such sediment remains in suspension, whereas even for velocities slightly below this critical limit, the suspended clay deposits rapidly. Scouring occurred predominantly within a well defined narrow and relatively straight zone near the center of the flume. read more read less

Topics:

Suspended load (64%)64% related to the paper, Shear stress (56%)56% related to the paper, Bank erosion (54%)54% related to the paper, Flume (50%)50% related to the paper, Shear (geology) (50%)50% related to the paper
995 Citations
Journal Article DOI: 10.1061/JYCEAJ.0003791
Sediment Transport: New Approach and Analysis

Abstract:

The relationship of sediment transport to fluid flow is considered. Physical reasoning leads to dimensionless groupings of the variables which are different for coarse sediment and for fine sediment, because of dissimilar modes of transport. This concept provides a basis for a new analysis of data from flume experiments, and ... The relationship of sediment transport to fluid flow is considered. Physical reasoning leads to dimensionless groupings of the variables which are different for coarse sediment and for fine sediment, because of dissimilar modes of transport. This concept provides a basis for a new analysis of data from flume experiments, and a method for dealing with transitional sizes of sediment is suggested. The analysis of experimental data supports the theory put forward and predictive equations are derived which relate total sediment flux to measurable properties of flow. A preliminary comparison is made with observations from other sources, including natural rivers. read more read less

Topics:

Sediment transport (58%)58% related to the paper, Sediment (54%)54% related to the paper, Bed material load (52%)52% related to the paper
884 Citations
Author Pic

SciSpace is a very innovative solution to the formatting problem and existing providers, such as Mendeley or Word did not really evolve in recent years.

- Andreas Frutiger, Researcher, ETH Zurich, Institute for Biomedical Engineering

Get MS-Word and LaTeX output to any Journal within seconds
1
Choose a template
Select a template from a library of 40,000+ templates
2
Import a MS-Word file or start fresh
It takes only few seconds to import
3
View and edit your final output
SciSpace will automatically format your output to meet journal guidelines
4
Submit directly or Download
Submit to journal directly or Download in PDF, MS Word or LaTeX

(Before submission check for plagiarism via Turnitin)

clock Less than 3 minutes

What to expect from SciSpace?

Speed and accuracy over MS Word

''

With SciSpace, you do not need a word template for Journal of Hydraulic Engineering.

It automatically formats your research paper to American Society of Civil Engineers formatting guidelines and citation style.

You can download a submission ready research paper in pdf, LaTeX and docx formats.

Time comparison

Time taken to format a paper and Compliance with guidelines

Plagiarism Reports via Turnitin

SciSpace has partnered with Turnitin, the leading provider of Plagiarism Check software.

Using this service, researchers can compare submissions against more than 170 million scholarly articles, a database of 70+ billion current and archived web pages. How Turnitin Integration works?

Turnitin Stats
Publisher Logos

Freedom from formatting guidelines

One editor, 100K journal formats – world's largest collection of journal templates

With such a huge verified library, what you need is already there.

publisher-logos

Easy support from all your favorite tools

Journal of Hydraulic Engineering format uses ASCE Custom Citation citation style.

Automatically format and order your citations and bibliography in a click.

SciSpace allows imports from all reference managers like Mendeley, Zotero, Endnote, Google Scholar etc.

Frequently asked questions

1. Can I write Journal of Hydraulic Engineering in LaTeX?

Absolutely not! Our tool has been designed to help you focus on writing. You can write your entire paper as per the Journal of Hydraulic Engineering guidelines and auto format it.

2. Do you follow the Journal of Hydraulic Engineering guidelines?

Yes, the template is compliant with the Journal of Hydraulic Engineering guidelines. Our experts at SciSpace ensure that. If there are any changes to the journal's guidelines, we'll change our algorithm accordingly.

3. Can I cite my article in multiple styles in Journal of Hydraulic Engineering?

Of course! We support all the top citation styles, such as APA style, MLA style, Vancouver style, Harvard style, and Chicago style. For example, when you write your paper and hit autoformat, our system will automatically update your article as per the Journal of Hydraulic Engineering citation style.

4. Can I use the Journal of Hydraulic Engineering templates for free?

Sign up for our free trial, and you'll be able to use all our features for seven days. You'll see how helpful they are and how inexpensive they are compared to other options, Especially for Journal of Hydraulic Engineering.

5. Can I use a manuscript in Journal of Hydraulic Engineering that I have written in MS Word?

Yes. You can choose the right template, copy-paste the contents from the word document, and click on auto-format. Once you're done, you'll have a publish-ready paper Journal of Hydraulic Engineering that you can download at the end.

6. How long does it usually take you to format my papers in Journal of Hydraulic Engineering?

It only takes a matter of seconds to edit your manuscript. Besides that, our intuitive editor saves you from writing and formatting it in Journal of Hydraulic Engineering.

7. Where can I find the template for the Journal of Hydraulic Engineering?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per Journal of Hydraulic Engineering's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

8. Can I reformat my paper to fit the Journal of Hydraulic Engineering's guidelines?

Of course! You can do this using our intuitive editor. It's very easy. If you need help, our support team is always ready to assist you.

9. Journal of Hydraulic Engineering an online tool or is there a desktop version?

SciSpace's Journal of Hydraulic Engineering is currently available as an online tool. We're developing a desktop version, too. You can request (or upvote) any features that you think would be helpful for you and other researchers in the "feature request" section of your account once you've signed up with us.

10. I cannot find my template in your gallery. Can you create it for me like Journal of Hydraulic Engineering?

Sure. You can request any template and we'll have it setup within a few days. You can find the request box in Journal Gallery on the right side bar under the heading, "Couldn't find the format you were looking for like Journal of Hydraulic Engineering?”

11. What is the output that I would get after using Journal of Hydraulic Engineering?

After writing your paper autoformatting in Journal of Hydraulic Engineering, you can download it in multiple formats, viz., PDF, Docx, and LaTeX.

12. Is Journal of Hydraulic Engineering's impact factor high enough that I should try publishing my article there?

To be honest, the answer is no. The impact factor is one of the many elements that determine the quality of a journal. Few of these factors include review board, rejection rates, frequency of inclusion in indexes, and Eigenfactor. You need to assess all these factors before you make your final call.

13. What is Sherpa RoMEO Archiving Policy for Journal of Hydraulic Engineering?

SHERPA/RoMEO Database

We extracted this data from Sherpa Romeo to help researchers understand the access level of this journal in accordance with the Sherpa Romeo Archiving Policy for Journal of Hydraulic Engineering. The table below indicates the level of access a journal has as per Sherpa Romeo's archiving policy.

RoMEO Colour Archiving policy
Green Can archive pre-print and post-print or publisher's version/PDF
Blue Can archive post-print (ie final draft post-refereeing) or publisher's version/PDF
Yellow Can archive pre-print (ie pre-refereeing)
White Archiving not formally supported
FYI:
  1. Pre-prints as being the version of the paper before peer review and
  2. Post-prints as being the version of the paper after peer-review, with revisions having been made.

14. What are the most common citation types In Journal of Hydraulic Engineering?

The 5 most common citation types in order of usage for Journal of Hydraulic Engineering are:.

S. No. Citation Style Type
1. Author Year
2. Numbered
3. Numbered (Superscripted)
4. Author Year (Cited Pages)
5. Footnote

15. How do I submit my article to the Journal of Hydraulic Engineering?

It is possible to find the Word template for any journal on Google. However, why use a template when you can write your entire manuscript on SciSpace , auto format it as per Journal of Hydraulic Engineering's guidelines and download the same in Word, PDF and LaTeX formats? Give us a try!.

16. Can I download Journal of Hydraulic Engineering in Endnote format?

Yes, SciSpace provides this functionality. After signing up, you would need to import your existing references from Word or Bib file to SciSpace. Then SciSpace would allow you to download your references in Journal of Hydraulic Engineering Endnote style according to Elsevier guidelines.

Fast and reliable,
built for complaince.

Instant formatting to 100% publisher guidelines on - SciSpace.

Available only on desktops 🖥

No word template required

Typset automatically formats your research paper to Journal of Hydraulic Engineering formatting guidelines and citation style.

Verifed journal formats

One editor, 100K journal formats.
With the largest collection of verified journal formats, what you need is already there.

Trusted by academicians

I spent hours with MS word for reformatting. It was frustrating - plain and simple. With SciSpace, I can draft my manuscripts and once it is finished I can just submit. In case, I have to submit to another journal it is really just a button click instead of an afternoon of reformatting.

Andreas Frutiger
Researcher & Ex MS Word user
Use this template