Example of Journal of Fluids and Structures format
Recent searches

Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
Look Inside
Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format Example of Journal of Fluids and Structures format
Sample paper formatted on SciSpace - SciSpace
This content is only for preview purposes. The original open access content can be found here.
open access Open Access ISSN: 8899746 e-ISSN: 10958622

Journal of Fluids and Structures — Template for authors

Publisher: Elsevier
Categories Rank Trend in last 3 yrs
Mechanical Engineering #95 of 596 down down by 27 ranks
journal-quality-icon Journal quality:
High
calendar-icon Last 4 years overview: 742 Published Papers | 4069 Citations
indexed-in-icon Indexed in: Scopus
last-updated-icon Last updated: 05/06/2020
Insights & related journals
General info
Top papers
Popular templates
Get started guide
Why choose from SciSpace
FAQ

Journal Performance & Insights

  • Impact Factor
  • CiteRatio
  • SJR
  • SNIP

Impact factor determines the importance of a journal by taking a measure of frequency with which the average article in a journal has been cited in a particular year.

2.84

7% from 2018

Impact factor for Journal of Fluids and Structures from 2016 - 2019
Year Value
2019 2.84
2018 3.07
2017 2.434
2016 2.021
graph view Graph view
table view Table view

insights Insights

  • Impact factor of this journal has decreased by 7% in last year.
  • This journal’s impact factor is in the top 10 percentile category.

CiteRatio is a measure of average citations received per peer-reviewed paper published in the journal.

5.5

4% from 2019

CiteRatio for Journal of Fluids and Structures from 2016 - 2020
Year Value
2020 5.5
2019 5.3
2018 5.2
2017 5.0
2016 4.5
graph view Graph view
table view Table view

insights Insights

  • CiteRatio of this journal has increased by 4% in last years.
  • This journal’s CiteRatio is in the top 10 percentile category.

SCImago Journal Rank (SJR) measures weighted citations received by the journal. Citation weighting depends on the categories and prestige of the citing journal.

1.005

19% from 2019

SJR for Journal of Fluids and Structures from 2016 - 2020
Year Value
2020 1.005
2019 1.242
2018 1.625
2017 1.481
2016 1.308
graph view Graph view
table view Table view

insights Insights

  • SJR of this journal has decreased by 19% in last years.
  • This journal’s SJR is in the top 10 percentile category.

Source Normalized Impact per Paper (SNIP) measures actual citations received relative to citations expected for the journal's category.

1.575

24% from 2019

SNIP for Journal of Fluids and Structures from 2016 - 2020
Year Value
2020 1.575
2019 2.066
2018 2.379
2017 2.115
2016 2.05
graph view Graph view
table view Table view

insights Insights

  • SNIP of this journal has decreased by 24% in last years.
  • This journal’s SNIP is in the top 10 percentile category.

Related Journals

open access Open Access ISSN: 15732479 e-ISSN: 17448980
recommended Recommended

Taylor and Francis

CiteRatio: 5.6 | SJR: 0.981 | SNIP: 1.662
open access Open Access ISSN: 8827508 e-ISSN: 15477401

Taylor and Francis

CiteRatio: 5.1 | SJR: 0.686 | SNIP: 1.835
open access Open Access ISSN: 0951192X e-ISSN: 13623052

Taylor and Francis

CiteRatio: 6.4 | SJR: 0.884 | SNIP: 1.244
open access Open Access ISSN: 10426914 e-ISSN: 15322475

Taylor and Francis

CiteRatio: 6.7 | SJR: 0.906 | SNIP: 1.54

Journal of Fluids and Structures

Guideline source: View

All company, product and service names used in this website are for identification purposes only. All product names, trademarks and registered trademarks are property of their respective owners.

Use of these names, trademarks and brands does not imply endorsement or affiliation. Disclaimer Notice

Elsevier

Journal of Fluids and Structures

The Journal of Fluids and Structures publishes original full-length papers, review articles and brief communications on any aspect of fluid–structure interaction and on the dynamics of systems related to such interactions: analytical, experimental, or computational. It i...... Read More

Engineering

i
Last updated on
05 Jun 2020
i
ISSN
0889-9746
i
Impact Factor
Very High - 3.03
i
Open Access
No
i
Sherpa RoMEO Archiving Policy
Green faq
i
Plagiarism Check
Available via Turnitin
i
Endnote Style
Download Available
i
Bibliography Name
elsarticle-num
i
Citation Type
Numbered
[25]
i
Bibliography Example
G. E. Blonder, M. Tinkham, T. M. Klapwijk, Transition from metallic to tunneling regimes in superconducting microconstrictions: Excess current, charge imbalance, and supercurrent conversion, Phys. Rev. B 25 (7) (1982) 4515–4532. URL 10.1103/PhysRevB.25.4515

Top papers written in this journal

Journal Article DOI: 10.1016/S0889-9746(88)90058-8
Vortex formation in the wake of an oscillating cylinder
Charles H. K. Williamson1, Anatol Roshko1

Abstract:

When a body oscillates laterally (cross-flow) in a free stream, it can synchronize the vortex formation frequency with the body motion frequency. This fundamental “lock-in” regions is but one in a whole series of synchronization regions, which have been found in the present paper, in an amplitude-wavelength plane (defining th... When a body oscillates laterally (cross-flow) in a free stream, it can synchronize the vortex formation frequency with the body motion frequency. This fundamental “lock-in” regions is but one in a whole series of synchronization regions, which have been found in the present paper, in an amplitude-wavelength plane (defining the body trajectory) up to amplitudes of five diameters. In the fundamental region, it is shown that the acceleration of the cylinder each half cycle induces the roll-up of the two shear layers close to the body, and thereby the formation of four regions of vorticity each cycle. Below a critical wavelength, each half cycle sees the coalescence of a pair of like-sign vortices and the development of a Karman-type wake. However, beyond this wavelength the like-sign vortices convect away from each other, and each of them pairs with an opposite-sign vortex. The resulting wake comprises a system of vortex pairs which can convect away from the wake centerline. The process of pairing causes the transition between these modes to be sudden, and this explains the sharp change in the character of the cylinder forces observed by Bishop and Hassan, and also the jump in the phase of the lift force relative to body displacement. At precisely the critical wavelength, only two regions of vorticity are formed, and the resulting shed vorticity is more concentrated than at other wavelengths. We interpret this particular case as a condition of “resonant synchronization”, and it corresponds with the peak in the body forces observed in Bishop and Hassan's work. read more read less

Topics:

Vortex (61%)61% related to the paper, Vortex shedding (58%)58% related to the paper, Vorticity (57%)57% related to the paper, Body force (52%)52% related to the paper, Vortex generator (52%)52% related to the paper
1,187 Citations
Journal Article DOI: 10.1016/J.JFLUIDSTRUCTS.2004.02.005
A critical review of the intrinsic nature of vortex-induced vibrations
Turgut Sarpkaya1

Abstract:

This is a comprehensive review of the progress made during the past two decades on vortex-induced vibration (VIV) of mostly circular cylindrical structures subjected to steady uniform flow. The critical elements of the evolution of the ideas, theoretical insights, experimental methods, and numerical models are traced systemat... This is a comprehensive review of the progress made during the past two decades on vortex-induced vibration (VIV) of mostly circular cylindrical structures subjected to steady uniform flow. The critical elements of the evolution of the ideas, theoretical insights, experimental methods, and numerical models are traced systematically; the strengths and weaknesses of the current state of the understanding of the complex fluid/structure interaction are discussed in some detail. Finally, some suggestions are made for further research on VIV. read more read less
1,141 Citations
Journal Article DOI: 10.1016/S0889-9746(02)00099-3
Fluctuating lift on a circular cylinder: review and new measurements

Abstract:

Apart from providing some new experimental data the paper reviews previous investigations concerning fluctuating lift acting on a stationary circular cylinder in cross-flow. In particular, effects of Reynolds number in the nominal case of an infinitely long and nonconfined cylinder in a smooth oncoming flow are discussed. The... Apart from providing some new experimental data the paper reviews previous investigations concerning fluctuating lift acting on a stationary circular cylinder in cross-flow. In particular, effects of Reynolds number in the nominal case of an infinitely long and nonconfined cylinder in a smooth oncoming flow are discussed. The Reynolds number range covered is from about Re = 47 to 2 x 10(5), i.e., from the onset of vortex shedding up to the end of the subcritical regime. At the beginning of the subcritical regime (Reesimilar or equal to0.3 x 10(3)) a spanwise correlation length of about 30 cylinder diameters is indicated, the correlation function being based on near-cylinder velocity fluctuations in outer parts of the separated shear layer. In between Reynolds numbers 1.6 x 10(3) and 20 x 10(3), an approximate 10-fold increase in the sectional r.m.s. lift coefficient is indicated. This range contains a fundamental change-over from one flow state to another, starting off at Re similar or equal to 5 x 103 and seemingly fully developed at Re similar or equal to 8 x 10(3). (C) 2002 Elsevier Science Ltd. All rights reserved. (Less) read more read less

Topics:

Lift coefficient (57%)57% related to the paper, Reynolds number (56%)56% related to the paper, Lift (force) (54%)54% related to the paper, Vortex shedding (53%)53% related to the paper
835 Citations
open accessOpen access Journal Article DOI: 10.1006/JFLS.1999.0236
Motions, forces and mode transitions in vortex-induced vibrations at low mass-damping
Asif Khalak1, Charles H. K. Williamson1

Abstract:

These experiments, involving the transverse oscillations of an elastically mounted rigid cylinder at very low mass and damping, have shown that there exist two distinct types of response in such systems, depending on whether one has a low combined mass-damping parameter (low m*ζ), or a high mass-damping (highm*ζ ). For our lo... These experiments, involving the transverse oscillations of an elastically mounted rigid cylinder at very low mass and damping, have shown that there exist two distinct types of response in such systems, depending on whether one has a low combined mass-damping parameter (low m*ζ), or a high mass-damping (highm*ζ ). For our low m*ζ, we find three modes of response, which are denoted as an initial amplitude branch, an upper branch and a lower branch. For the classical Feng-type response, at highm*ζ , there exist only two response branches, namely the initial and lower branches. The peak amplitude of these vibrating systems is principally dependent on the mass-damping (m*ζ), whereas the regime of synchronization (measured by the range of velocity U*) is dependent primarily on the mass ratio, m*ζ. At low (m*ζ), the transition between initial and upper response branches involves a hysteresis, which contrasts with the intermittent switching of modes found, using the Hilbert transform, for the transition between upper–lower branches. A 180° jump in phase angle φ is found only when the flow jumps between the upper–lower branches of response. The good collapse of peak-amplitude data, over a wide range of mass ratios (m*=1–20), when plotted against (m*+CA) ζ in the “Griffin” plot, demonstrates that the use of a combined parameter is valid down to at least (m*+CA)ζ ∼0·006. This is two orders of magnitude below the “limit” that had previously been stipulated in the literature, (m*+CA) ζ>0·4. Using the actual oscillating frequency (f) rather than the still-water natural frequency (fN), to form a normalized velocity (U*/f*), also called “true” reduced velocity in recent studies, we find an excellent collapse of data for a set of response amplitude plots, over a wide range of mass ratiosm* . Such a collapse of response plots cannot be predicted a priori, and appears to be the first time such a collapse of data sets has been made in free vibration. The response branches match very well the Williamson–Roshko (Williamson & Roshko 1988) map of vortex wake patterns from forced vibration studies. Visualization of the modes indicates that the initial branch is associated with the 2S mode of vortex formation, while the Lower branch corresponds with the 2P mode. Simultaneous measurements of lift and drag have been made with the displacement, and show a large amplification of maximum, mean and fluctuating forces on the body, which is not unexpected. It is possible to simply estimate the lift force and phase using the displacement amplitude and frequency. This approach is reasonable only for very low m*. read more read less

Topics:

Amplitude (52%)52% related to the paper
View PDF
812 Citations
Journal Article DOI: 10.1006/JFLS.1993.1012
Optimal Thrust Development in Oscillating Foils with Application to Fish Propulsion

Abstract:

Oscillating foils produce thrust through the development of a jet-like average flow. It is found that such jets are convectively unstable with a narrow range of frequencies of maximum amplification, resulting in the formation of a staggered array of vortices with direction opposite to that of the classical Karman street. A st... Oscillating foils produce thrust through the development of a jet-like average flow. It is found that such jets are convectively unstable with a narrow range of frequencies of maximum amplification, resulting in the formation of a staggered array of vortices with direction opposite to that of the classical Karman street. A stable co-existence of the jet profile and the large-scale patterns is ensured only at the frequency of maximum amplification, hence at this frequency optimal efficiency is obtained, i.e., maximum thrust per unit input energy. The nondimensional frequency of maximum amplification (Strouhal number) is in the range of 0·25 to 0·35. Experiments confirms this results, while the analysis of a large number of data from observations on fish and cetaceans confirm that optimal fish propulsion is achieved within this range of Strouhal number. read more read less

Topics:

Strouhal number (62%)62% related to the paper, Thrust (54%)54% related to the paper
741 Citations
Author Pic

SciSpace is a very innovative solution to the formatting problem and existing providers, such as Mendeley or Word did not really evolve in recent years.

- Andreas Frutiger, Researcher, ETH Zurich, Institute for Biomedical Engineering

Get MS-Word and LaTeX output to any Journal within seconds
1
Choose a template
Select a template from a library of 40,000+ templates
2
Import a MS-Word file or start fresh
It takes only few seconds to import
3
View and edit your final output
SciSpace will automatically format your output to meet journal guidelines
4
Submit directly or Download
Submit to journal directly or Download in PDF, MS Word or LaTeX

(Before submission check for plagiarism via Turnitin)

clock Less than 3 minutes

What to expect from SciSpace?

Speed and accuracy over MS Word

''

With SciSpace, you do not need a word template for Journal of Fluids and Structures.

It automatically formats your research paper to Elsevier formatting guidelines and citation style.

You can download a submission ready research paper in pdf, LaTeX and docx formats.

Time comparison

Time taken to format a paper and Compliance with guidelines

Plagiarism Reports via Turnitin

SciSpace has partnered with Turnitin, the leading provider of Plagiarism Check software.

Using this service, researchers can compare submissions against more than 170 million scholarly articles, a database of 70+ billion current and archived web pages. How Turnitin Integration works?

Turnitin Stats
Publisher Logos

Freedom from formatting guidelines

One editor, 100K journal formats – world's largest collection of journal templates

With such a huge verified library, what you need is already there.

publisher-logos

Easy support from all your favorite tools

Journal of Fluids and Structures format uses elsarticle-num citation style.

Automatically format and order your citations and bibliography in a click.

SciSpace allows imports from all reference managers like Mendeley, Zotero, Endnote, Google Scholar etc.

Frequently asked questions

Absolutely not! With our tool, you can freely write without having to focus on LaTeX. You can write your entire paper as per the Journal of Fluids and Structures guidelines and autoformat it.

Yes. The template is fully compliant as per the guidelines of this journal. Our experts at SciSpace ensure that. Also, if there's any update in the journal format guidelines, we take care of it and include that in our algorithm.

Sure. We support all the top citation styles like APA style, MLA style, Vancouver style, Harvard style, Chicago style, etc. For example, in case of this journal, when you write your paper and hit autoformat, it will automatically update your article as per the Journal of Fluids and Structures citation style.

You can avail our Free Trial for 7 days. I'm sure you'll find our features very helpful. Plus, it's quite inexpensive.

Yup. You can choose the right template, copy-paste the contents from the word doc and click on auto-format. You'll have a publish-ready paper that you can download at the end.

A matter of seconds. Besides that, our intuitive editor saves a load of your time in writing and formating your manuscript.

One little Google search can get you the Word template for any journal. However, why do you need a Word template when you can write your entire manuscript on SciSpace, autoformat it as per Journal of Fluids and Structures's guidelines and download the same in Word, PDF and LaTeX formats? Try us out!.

Absolutely! You can do it using our intuitive editor. It's very easy. If you need help, you can always contact our support team.

SciSpace is an online tool for now. We'll soon release a desktop version. You can also request (or upvote) any feature that you think might be helpful for you and the research community in the feature request section once you sign-up with us.

Sure. You can request any template and we'll have it up and running within a matter of 3 working days. You can find the request box in the Journal Gallery on the right sidebar under the heading, "Couldn't find the format you were looking for?".

After you have written and autoformatted your paper, you can download it in multiple formats, viz., PDF, Docx and LaTeX.

To be honest, the answer is NO. The impact factor is one of the many elements that determine the quality of a journal. Few of those factors the review board, rejection rates, frequency of inclusion in indexes, Eigenfactor, etc. You must assess all the factors and then take the final call.

SHERPA/RoMEO Database

We have extracted this data from Sherpa Romeo to help our researchers understand the access level of this journal. The following table indicates the level of access a journal has as per Sherpa Romeo Archiving Policy.

RoMEO Colour Archiving policy
Green Can archive pre-print and post-print or publisher's version/PDF
Blue Can archive post-print (ie final draft post-refereeing) or publisher's version/PDF
Yellow Can archive pre-print (ie pre-refereeing)
White Archiving not formally supported
FYI:
  1. Pre-prints as being the version of the paper before peer review and
  2. Post-prints as being the version of the paper after peer-review, with revisions having been made.

The 5 most common citation types in order of usage are:.

S. No. Citation Style Type
1. Author Year
2. Numbered
3. Numbered (Superscripted)
4. Author Year (Cited Pages)
5. Footnote

Our journal submission experts are skilled in submitting papers to various international journals.

After uploading your paper on SciSpace, you would see a button to request a journal submission service for Journal of Fluids and Structures.

Each submission service is completed within 4 - 5 working days.

Yes. SciSpace provides this functionality.

After signing up, you would need to import your existing references from Word or .bib file.

SciSpace would allow download of your references in Journal of Fluids and Structures Endnote style, according to elsevier guidelines.

Fast and reliable,
built for complaince.

Instant formatting to 100% publisher guidelines on - SciSpace.

Available only on desktops 🖥

No word template required

Typset automatically formats your research paper to Journal of Fluids and Structures formatting guidelines and citation style.

Verifed journal formats

One editor, 100K journal formats.
With the largest collection of verified journal formats, what you need is already there.

Trusted by academicians

I spent hours with MS word for reformatting. It was frustrating - plain and simple. With SciSpace, I can draft my manuscripts and once it is finished I can just submit. In case, I have to submit to another journal it is really just a button click instead of an afternoon of reformatting.

Andreas Frutiger
Researcher & Ex MS Word user
Use this template