Institution
Bauhaus University, Weimar
Education•Weimar, Thüringen, Germany•
About: Bauhaus University, Weimar is a education organization based out in Weimar, Thüringen, Germany. It is known for research contribution in the topics: Finite element method & Isogeometric analysis. The organization has 1421 authors who have published 2998 publications receiving 104454 citations. The organization is also known as: Bauhaus-Universität Weimar & Hochschule für Architektur und Bauwesen.
Topics: Finite element method, Isogeometric analysis, Graphene, Fracture mechanics, Thermal conductivity
Papers published on a yearly basis
Papers
More filters
••
29 Jul 2007
TL;DR: A high speed optical motion capture method that can measure three dimensional motion, orientation, and incident illumination at tagged points in a scene, using tracking tags that work in natural lighting conditions and can be imperceptibly embedded in attire or other objects is presented.
Abstract: In this paper, we present a high speed optical motion capture method that can measure three dimensional motion, orientation, and incident illumination at tagged points in a scene. We use tracking tags that work in natural lighting conditions and can be imperceptibly embedded in attire or other objects. Our system supports an unlimited number of tags in a scene, with each tag uniquely identified to eliminate marker reacquisition issues. Our tags also provide incident illumination data which can be used to match scene lighting when inserting synthetic elements. The technique is therefore ideal for on-set motion capture or real-time broadcasting of virtual sets. Unlike previous methods that employ high speed cameras or scanning lasers, we capture the scene appearance using the simplest possible optical devices - a light-emitting diode (LED) with a passive binary mask used as the transmitter and a photosensor used as the receiver. We strategically place a set of optical transmitters to spatio-temporally encode the volume of interest. Photosensors attached to scene points demultiplex the coded optical signals from multiple transmitters, allowing us to compute not only receiver location and orientation but also their incident illumination and the reflectance of the surfaces to which the photosensors are attached. We use our untethered tag system, called Prakash, to demonstrate methods of adding special effects to captured videos that cannot be accomplished using pure vision techniques that rely on camera images.
92 citations
•
01 Jan 2007TL;DR: In this paper, real-time image correction techniques that enable projector-camera systems to display images onto screens that are not optimized for projections, such as geometrically complex, colored and textured surfaces, are discussed.
Abstract: This article focuses on real-time image correction techniques that enable projector-camera systems to display images onto screens that are not optimized for projections, such as geometrically complex, colored and textured surfaces. It reviews hardware accelerated methods like pixel-precise geometric warping, radiometric compensation, multi-focal projection, and the correction of general light modulation effects. Online and offline calibration as well as invisible coding methods are explained. Novel attempts in super-resolution, high dynamic range and high-speed projection are discussed. These techniques open a variety of new applications for projection displays. Some of them will also be presented in this report.
91 citations
••
TL;DR: In this paper, a new mix design method for self-compact high performance concrete (SCHPC) containing various mineral admixtures (MA) was presented, where the constituent materials were calculated by using the absolute volume method.
91 citations
••
TL;DR: It is shown that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction, and has a negative Poisson's ratio in the direction perpendicular to the atomic plane.
Abstract: The distinguishing structural feature of single-layered black phosphorus is its puckered structure, which leads to many novel physical properties. In this work, we first present a new parameterization of the Stillinger–Weber potential for single-layered black phosphorus. In doing so, we reveal the importance of a cross-pucker interaction term in capturing its unique mechanical properties, such as a negative Poisson's ratio. In particular, we show that the cross-pucker interaction enables the pucker to act as a re-entrant hinge, which expands in the lateral direction when it is stretched in the longitudinal direction. As a consequence, single-layered black phosphorus has a negative Poisson's ratio in the direction perpendicular to the atomic plane. As an additional demonstration of the impact of the cross-pucker interaction, we show that it is also the key factor that enables capturing the edge stress-induced bending of single-layered black phosphorus that has been reported in ab initio calculations.
91 citations
••
TL;DR: In this article, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow.
Abstract: Renewable energy resources such as wind and solar are intermittent, which causes instability when being connected to utility grid of electricity. Compressed air energy storage (CAES) provides an economic and technical viable solution to this problem by utilizing subsurface rock cavern to store the electricity generated by renewable energy in the form of compressed air. Though CAES has been used for over three decades, it is only restricted to salt rock or aquifers for air tightness reason. In this paper, the technical feasibility of utilizing hard rock for CAES is investigated by using a coupled thermo-hydro-mechanical (THM) modelling of nonisothermal gas flow. Governing equations are derived from the rules of energy balance, mass balance, and static equilibrium. Cyclic volumetric mass source and heat source models are applied to simulate the gas injection and production. Evaluation is carried out for intact rock and rock with discrete crack, respectively. In both cases, the heat and pressure losses using air mass control and supplementary air injection are compared.
90 citations
Authors
Showing all 1443 results
Name | H-index | Papers | Citations |
---|---|---|---|
Timon Rabczuk | 99 | 727 | 35893 |
Adri C. T. van Duin | 79 | 489 | 26911 |
Paolo Rosso | 56 | 541 | 12757 |
Xiaoying Zhuang | 54 | 271 | 10082 |
Benno Stein | 53 | 340 | 9880 |
Jin-Wu Jiang | 52 | 175 | 7661 |
Gordon Wetzstein | 51 | 258 | 9793 |
Goangseup Zi | 45 | 153 | 8411 |
Bohayra Mortazavi | 44 | 162 | 5802 |
Thorsten Hennig-Thurau | 44 | 123 | 17542 |
Jörg Hoffmann | 40 | 200 | 7785 |
Martin Potthast | 40 | 190 | 6563 |
Pedro M. A. Areias | 38 | 107 | 5908 |
Amir Mosavi | 38 | 432 | 6209 |
Guido De Roeck | 38 | 274 | 8063 |