scispace - formally typeset
Search or ask a question

Showing papers by "Braunschweig University of Technology published in 1975"


Proceedings Article
01 Sep 1975
TL;DR: In this article, the authors proposed a waveguide made of dielectric films, strips and ribs on transparent substrates, suitable for integration of lines and components into microscopic circuits and having less than 1 dB/cm loss.
Abstract: Dielectric films, strips and ribs on transparent substrates serve as wave-guides in planar optics. Made of materials suitable for integration of lines and components into microscopic circuits they are preferably monomode and have less than 1 dB/cm loss. Cladded core and gradient glass fibres transmit optical signals over wide distances with low loss and distortion. High silica content fibres have as little as 1 dB/km loss and broaden laser pulses by less than 1 ns/km.

72 citations


Journal ArticleDOI
TL;DR: In this paper, a simple model based on extensive experimental investigations is developed to describe a possible work hardening process in copper crystals deformed in tension along the [100] axis.

29 citations


Journal ArticleDOI
TL;DR: In western Crete, Greece, a widespread occurrence of chloritoid-bearing metapelites with the main mineral assemblage chloritoids-phengitic white mica-Fe-rich chlorite-quartz was recorded to form the country rock of glaucophane-bearing metabasalts as discussed by the authors.
Abstract: In western Crete, Greece, a widespread occurrence of chloritoid-bearing metapelites with the main mineral assemblage chloritoid-phengitic white mica-Fe-rich chlorite-quartz was recorded to form the country rock of glaucophane-bearing metabasalts. Six bulk rock analyses of the metapelites conform to the compositional restrictions evaluated by Hoschek (1967) for the formation of chloritoid. Three microprobe analyses revealed chloritoid compositions low in Mg and Mn, and, consequently, high in Fe. The metamorphic grade documented in the metapelites is obviously related to a subsequent prograde metamorphism by which, in the adjacent meta-basalts, epidote is formed at the expense of lawsonite. No relict of a high-P, low-T assemblage, in part well preserved in the meta-basalts, was recognized in the chloritoid schists. The significance of the metamorphic history is briefly discussed.

21 citations


Journal ArticleDOI
TL;DR: In this article, it was shown that the theorem of S. Piccard remains valid, if topological spaces X,Y,Z are replaced by topological space X, Y, Z, and f:X×Y→Z is a function, which satisfies a certain global (respectively local) solvability condition.
Abstract: The following result is due to S. Piccard ([12], S.30): “If A,B ⊂ℝ are Baire sets of second category and if the function f: ℝ×ℝ→ℝ is defined by f(x,y):=x−y (x,y e ℝ), then the interior of f(A×B) is non void”. In this note the two main results assure, that the theorem of S. Piccard remains valid, if (1) ℝ is replaced by topological spaces X,Y,Z, (2) f:X×Y→Z is a function, which satisfies a certain global (respectively local) solvability condition, (3) A ⊂X contains a Baire set of second category and (4) B ⊂Y is only of second category.

14 citations


Journal ArticleDOI
TL;DR: Für die Untersuchung der Wurzelverkernung wurden die Baumarten Fichte und Larche gewahlt, wobei Vergleichsversuche auch an Kiefer, Buche, Eiche, Pappel erfolgten.
Abstract: Fur die Untersuchung der Wurzelverkernung wurden die Baumarten Fichte und Larche gewahlt, wobei Vergleichsversuche auch an Kiefer, Buche, Eiche, Pappel erfolgten. Neben anatomischen Merkmalen der Wurzel wurden die Atmungsaktivitat und die Peroxidaseaktivitat von Holzstrahlparenchymzellen gepruft. Die Wurzeln aller untersuchten Baumarten konnen Kernholz bilden. Das Wurzelholz verkernt nur in dem stammnahen Bereich, der anatomisch dem Stammholz weitgehend ahnlich ist. Larchenwurzeln bilden einen Farbkern, wahrend bei Fichtenwurzeln der innere Teil dem Reifholz des Stammes entspricht. Fur die Entstehung einer Verkernung im Wurzelholz gelten gleiche Kriterien wie im Stammholz. Die Verkernung setzt nicht plotzlich an der Splint/Kerngrenze ein, sondern erfast bereits im Splintholz mit zunehmender Haufigkeit einzelne Parenchymzellen. An der Splint/Kerngrenze sterben nicht alle Parenchymzellen ab. Einige bleiben auch innerhalb des Kernholzes mehrere Jahre aktiv und zeigen gleiche zytologische und physiologische Merkmale wie im Splintholz.

12 citations


Journal ArticleDOI
TL;DR: In this paper, an stabformigen FeSi-Einkristallen (2.5 Gew% Si) with zweizahliger Stabachse wird mit Hilfe des magnetooptischen Kerreffekts die Bereichstruktur untersucht.

9 citations


Journal ArticleDOI
TL;DR: In this article, the IR-Gasspektren and Raman-Flussigkeitsspektern of (CF3)2AsX were investigated by normal coordinate analysis using a transferred force field.
Abstract: Die IR-Gasspektren und Raman-Flussigkeitsspektren von (CF3)2AsX wurden aufgenommen; die IR-Untersuchung von (CF3)2PX wurde durch die Registrierung der IR-Spektren im Bereich von 200–400 cm−1 vervollstandigt. Die Zuordnung fur die untersucht en Phosphane und Arsane wird durch eine Normalkoordinatenanalyse auf der Basis eines MVFF gestutzt. Vibrational Spectra and Normal Coordinate Analysis of (CF3)2PX and (CF3)2AsX (X = F, Cl, Br, I) Gas phase i. r. spectra and liquid-phase Raman spectra of (CF3)2AsX are reported. The i. r. investigation of the corresponding phosphorus compounds is complited. The spectra of both the phosphorus and the arsenic compounds were assigned on the basis of a normal coordinate analysis using a transferred force field.

8 citations



Journal ArticleDOI
TL;DR: The binuclear complex (NH3)3Co · μ(OH, OH, OH) · Co(NH 3)3]2(S2O6)3 was determined by an X-ray crystallographic analysis and was refined to R = 0.052 as mentioned in this paper.
Abstract: Der Zweikernkomplex [(NH3)3Co · μ(OH, OH, OH) · Co(NH3)3]2(S2O6)3 kristallisiert in der monoklinen Raumgruppe P21/c mit den Gitterkonstanten a = 10.970, b = 9.412, c = 16.069 A und β = 117.10°; in der Elementarzelle befinden sich vier Kationen und sechs Anionen. Die Struktur wurde rontgenographisch bestimmt und bis zu R = 0.052 verfeinert. Polynuclear Cobalt Complexes: The Structure of Bis(tri-μ-hydroxo-bis{triammine-cobalt(III)})trisdithionate The binuclear complex [(NH3)3Co · μ(OH, OH, OH) · Co(NH3)3]2(S2O6)3 crystallizes in the monoclinic space group P21/c with lattice constants a = 10.970, b = 9.412, c = 16.069 A and β = 117.10°. The unit cell contains four cations and six anions. The structure has been determined by an X-ray crystallographic analysis and was refined to R = 0.052.

8 citations


Journal ArticleDOI
TL;DR: In this paper, the structure and spectra of the diaza-diphosphetidin are reported, and the synthesis, n. m. r. spectra and crystal structure of the Diphosphein, [(C6F5)F2PNCH3]2, are reported.
Abstract: Die Darstellung, Kernresonanzspektren und Kristallstruktur des Diaza-diphosphetidins, [(C6F5)F2PNCH3]2, wird beschrieben. Structure of Diaza-diphosphetidin, [(C6F5)F2PNCH3]2 The synthesis, n. m. r. spectra and crystal structure of the diaza-diphosphetidin, [(C6F5)F2PNCH3]2, are reported.

8 citations



Journal ArticleDOI
TL;DR: In this paper, a comparison between transmission reaction and reflection cavity-stabilised oscillators is made, and outlines are given for designing highly stable microwave oscillators based on these considerations.
Abstract: A comparison is made between transmission reaction and reflection cavity-stabilised oscillators. Their essential features such as maximum loaded Q factor and tunuble frequency range are shown to differ markedly. Based on these considerations, outlines are given for designing highly stable microwave oscillators.

Journal ArticleDOI
TL;DR: In this paper, the small-angle scattering of Ni single crystals with [111] and [100] axis orientation is measured by a photographic method in the work-hardened state after tensile deformation.
Abstract: Magnetic small-angle scattering of subthermal neutrons by internal stress fields in work-hardened nickel single crystals oriented for multiple glide. I. Experiments and results The small-angle scattering of Ni single crystals with [111] and [100] axis orientation is measured by a photographic method in the work-hardened state after tensile deformation. Parameters are the external magnetic field H parallel to the axis (600H[Oe] 1000), the plastic shear stress τpl (1,4  τpl[kp/mm2]8,8), and the elastic stress τel (0  τel  τ pl) applied to the deformed crystals during the experiments. The scattering is found to be anisotropic and characteristic for the chosen orientation. The quantitative photometric analysis shows that the parameters mentioned above only influence the intensity but not the distribution of the scattered neutrons. The scattering increases with the elastic stress and decreases with the magnetic field. In particular, in the unloaded state there is a linear relation between the sc...


Journal ArticleDOI
TL;DR: In this paper, the i.r. spectrum near 1200 cm −1 of gaseous DCF 3 has been recorded with a resolution of 0·2 cm − 1 and the Fermi resonance (ν 3 + ν 6 )/ν 4 has been analyzed by means of a band contour simulation program.




Journal ArticleDOI
TL;DR: In this paper, the magnetischen Streufelder im Temperaturintervall 5.5-500 K gemessen are untersucht, i.e. they are orientiert in 1 10 -Ni-Einkristalloberflachen.

Journal ArticleDOI
TL;DR: In this paper, the authors reported measurements of the equatorial magneto-optic Kerr effect of Fe3O4 in the near infrared at temperatures 95 K and 293 K. Out of these measurements real and imaginary parts of the corresponding nondiagonal component of the dialectric tensor were determined.
Abstract: It is reported about measurements of the equatorial magneto-optic Kerr effect of Fe3O4 in the near infrared at temperatures 95 K and 293 K. Out of these measurements real and imaginary parts of the corresponding nondiagonal component of the dialectric tensor were determined. The results show a broad magneto-optical absorption maximum centered at a photon energy of 0.55 eV. On cooling the material, the position of the maximum remains essentially unchanged.

Journal ArticleDOI
TL;DR: Holzbearbeitungsmaschinen konnen anhand dei Mengenleistung, der Fertigungskosten pro Werkstuck and der WerkStuckqualitat bewertet werden as discussed by the authors.
Abstract: Holzbearbeitungsmaschinen konnen anhand dei Mengenleistung, der Fertigungskosten pro Werkstuck und der Werkstuckqualitat bewertet werden. Eine wirtschaftlich optimale Fertigung wird durch Erhohung von Mengenleistung und Werkstuckqualitat bei sinkenden Kosten ermoglicht. Hier kann die Automatisierung von Holzbearbeitungsmaschinen vorteilhaft verwirklicht werden. Ihre konsequente Anwendung bedingt aber ein Umdenken und Uberarbeiten bisheriger Gewohnheiten. Es beginut mit der Zeichnungserstellung und setzt sich fort bis zur Betriebsorganisation. Auch die Konzeption der Maschine mus auf die jeweilige Automatisierungsstufe eingerichtet werden. Die Flexibilitat der Maschinenkonstruktion kann durch Baukastensysteme, Normungen, straffe Unterteilung in werkstuckabhangige und werkzeugabhangige Baugruppen auf der mechanischen Seite und durch programmierbare Rechner auf der steuerungstechnischen Seite erhoht werden.

Journal ArticleDOI
TL;DR: In this paper, the refractive index of Ge films was determined for a fixed wavelength of 2.5 μm and a similar dependence on the substrate temperature Ts as the resistivity was found.
Abstract: Published results of resistivity measurements on evaporated Ge films in dependence on the substrate temperature are modified and completed by conclusions drawn from optical measurements on the same batch of samples. The refractive index of these films (determined for a fixed wavelength of 2.5 μm) shows a similar dependence on the substrate temperature Ts as the resistivity, especially a pronounced refractive index step at TST = 135 °C. The practically constant value of the refractive index (na = 4.565) in films for TS ≦ 130 °C is attributed to the “pure” amorphous phase of Ge whereas the polycrystalline films for TS > 130 °C proved to be mixed phases of amorphous and crystalline Ge of definitive proportions. In the small range of 130 °C ≦ TS ≦ 140 °C the refractive index (na,c) strongly decreases to na,c = 4.29. This represents a volume fraction decrease of a-Ge from ≈100% down to 50.5%. In the range of 140 °C ≦ TS ≦ 350 °C the a-Ge proportion only decreases from 50.5 to 39.3%. and hence the c-Ge part increases from 49.5 to 60.7%. according to a weakly decrease of na,c with increasing Ts. Thus the dependence of the refractive index values on the contribution of amorphous Ge is found. The relatively high value of na is possibly related to Ge of a high density. This might be due to the Ge III modification giving evidence of a similarity of a-Ge with Ge III and confirming the random network model for a-Ge. Publizierte Ergebnisse uber Messungen des spezifischen Widerstandes aufgedampfter Ge-Filme als Funktion der Substrattemperatur werden durch aus optischen Messungen ermittelte Resultate an den gleichen Proben modifiziert und vervollstandigt. Der fur eine feste Wellenlange von 2,5 μm ermittelte Brechungsindex zeigt eine ahnliche Abhangigkeit von der Substrattemperatur TS wie der spezifische Widerstand, insbesondere tritt hier ein ausgepragter Brechungsindexsprung um TST = 135 °C in Erscheinung. Der praktisch konstante Brechungsindexwert (na = 4,565) in den Schichten fur TS ≦ 130 °C wird auf die „reine” amorphe Ge-Phase zuruckgefuhrt, wohingegen die polykristallinen Filme fur TS > 130 °C sich als Mischphasen aus amorphem und kristallinem Ge mit definitiven Anteilen herausstellten. In dem schmalen Bereich 130 °C ≦ TS ≦ 140 °C nimmt der Brechungsindex (na,c) stark ab auf na,c = 4,29. Dies stellt eine Abnahme des a-Ge-Volumen-anteils von ≈100 auf 50,5% dar. Im Bereich 140 °C ≦ TS ≦ 350 °C nimmt der a-Ge-Anteil entsprechend einer schwachen Abnahme von na,c mit steigendem TS nur noch von 50,5 auf 39,3% ab und der c-Anteil entsprechend von 49,5 auf 60,7% zu. So wurde eine Abhangigkeit der Brechungsindexwerte vom Beitrag amorphen Germaniums gefunden. Der relativ hohe Wert von na konnte mit einer hohen spezifischen Dichte des Ge zusammenhangen. Dies ware bei der Ge III Modifikation der Fall, was die ahnlichkeit von amorphem Ge mit Ge III nahelegt und das Zufallsnetzwerk-Modell fur a-Ge erharten konnte.

Journal ArticleDOI
TL;DR: In this paper, the authors compared the memory-state model and memory-trace model for signal identification in a series of random trials on each of which 10 observers had to identify which of two possible tones of different amplitude had been presented.
Abstract: On each of a series of random trials, 10 observers had to identify which of two possible tones of different amplitude had been presented. Two theories for this paradigm of signal identification are compared. One theory, the memory-trace model, is a normal process model, whereas the competitive theory, the memory-state model, assumes high thresholds operating in a Markov chain. Different predictions for sequences of stimulus response pairs are derived. The results of the experiment involving payoffs contingent upon the previous answer strongly favor the memory-trace model.


Journal ArticleDOI
TL;DR: In this paper, the steric conformation of MoOCl3-Aminosaurederivat-Komplexes has been determined by analysis, magnetic investigations, mass, infrared and electron spectra.
Abstract: MoCl5 bildet mit Aminosaurederivaten in Methanol, Athanol oder Diathylather gemas Rkk. 1–3 grunkristalline MoOCl3-Aminosaurederivat-Komplexe des Typs B(s. Schema 1), die auch direkt aus den Komponenten entstehen (Rk. 4). Sie wurden durch Analysen, magnetische Messungen, Massen-, IR- und Elektronenspektren in ihrer Konstitution festgelegt nicht aber in ihrer sterischen Konformation aufgeklart. Coordination Compounds from Molybdenum Oxide Trichloride and Amino-acid Derivatives Formation of complexes of type B (look Scheme 1) between MoOCl3 and aminoacid derivatives occurs according to eq. 1–4 by reaction of MoOCl5 in methanol, ethanol or diethyl ether as well as by direct reaction of MoOCl3 with the ligands. They were confirmed in their constitution by analysis, magnetic investigations, mass, infrared and electron spectra, but not determined in their steric conformation.


Journal ArticleDOI
TL;DR: In this paper, the susceptibility of the weak ferromagnet Fe 3 BO 6 has been measured along the principal orthorhombic axes as a function of temperature for T 293 K.
Abstract: The susceptibility of the weak ferromagnet Fe 3 BO 6 has been measured along the principal orthorhombic axes as a function of temperature for T 293 K. The results show that the spins are parallel to [100] for T T 0 = 415 K and parallel [001] for T T 0 . At room temperature a field of 8.8 T is necessary to rotate the spins from [001] to [100]. The magnetic structure of Fe 3 BO 6 is discussed with the aid of representation analysis.

Journal ArticleDOI
01 Sep 1975
TL;DR: In this paper, a differentialgleichungen des Vektorpotentials mit Hilfe von Reihenansatzen gelosten werden gelost, in which endliche Schienenbreite, ja sogar Schienenschienenquerschnitte beliebiger Form konnen durch eine Reihendarstellung der elektrischen Leitfahigkeit in den Ansatz einbezogen.
Abstract: Nach der Beschreibung der Voraussetzungen und des Rechenmodells werden die Differentialgleichungen des Vektorpotentials mit Hilfe von Reihenansatzen gelost. Die endliche Schienenbreite, ja sogar Schienenquerschnitte beliebiger Form konnen durch eine Reihendarstellung der elektrischen Leitfahigkeit in den Ansatz einbezogen werden. Die Stromverdrangungserscheinungen werden bei endlicher Leiterdicke in zwei Ebenen als voneinander unabhangig betrachtet. Das Erregersystem ist als Spulengruppe in supraleitender Ausfuhrung und in Normal-oder Nullflusanordnung vorgesehen. Aus den drei Komponenten des magnetischen Flusses lassen sich Trag-, Seiten-und Bremskrafte berechnen.

Journal ArticleDOI
01 May 1975
TL;DR: The Maximalforderungen an die finite Ubersetzung einer selbstadjungierten homogenen Randwertaufgabe, Symmetrie der Systemmatrizen, einseitige Annaherung der Eigenwerte, willkurliche Wahl der Ansatzfunktionen bezuglich der Randbedingungen and Reduzierbarkeit der Ordnung werden durch eine Kombination der Variation with der Kollokation weitgehend erfullt
Abstract: Die Maximalforderungen an die finite Ubersetzung einer selbstadjungierten homogenen Randwertaufgabe, Symmetrie der Systemmatrizen, einseitige Annaherung der Eigenwerte, willkurliche Wahl der Ansatzfunktionen bezuglich der Randbedingungen und Reduzierbarkeit der Ordnung werden durch eine Kombination der Variation mit der Kollokation weitgehend erfullt.

Journal ArticleDOI
TL;DR: In this article, the non-resonant interband Faraday rotation in a gallium phosphide single crystal was measured between 1.5 and 2.2 eV at room temperature.
Abstract: The non-resonant interband Faraday rotation in a gallium phosphide single crystal was measured between 1.5 and 2.2 eV at room temperature. As shown by a comparison with theoretical dispersion functions, the interband Faraday rotation in GaP is associated with allowed direct interband transitions (band gap Eg = 2.74 eV). Using a single beam lock-in technique the large Faraday rotation of GaP was applied for measuring high magnetic fields (B ≦ 12.5 T) by a small field-intensity meter containing all optical components. This method is advantageous, because the rotation angle is linearly related to the magnetic field. A minimum measuring error of ± 2 × 10−3 was obtained. A proper figure of merit is discussed for the optimum selection of wavelength and thickness. Die nichtoszillatorische Interband-Faraday-Drehung in einem Galliumphosphid-Einkristall wurde bei Zimmertemperatur zwischen 1,5 und 2,2 eV gemessen. Ein Vergleich mit theoretischen Spektralfunktionen deutet auf eine Kopplung der Interband-Faraday-Drehung in GaP an direkte erlaubte Interband-Ubergange (Bandabstand Eg = 2,74 eV). Mit Hilfe eines Einstrahlverfahrens und mit Lock-in-Technik wurde die grose Faraday-Drehung von GaP zur Messung hoher Magnetfelder (B ≦ 12,5 T) benutzt. Hierzu diente eine kleine Feldstarke-Sonde, die alle optischen Komponenten enthielt. Diese Mesmethode hat den Vorteil der Linearitat zwischen Drehwinkel und magnetischer Feldstarke. Es wurde ein minimaler Mesfehler von ± 2 × 10−3 erreicht. Ein geeignetes Kriterium fur optimale Wellenlangen- und Dickenauswahl wird diskutiert.