Showing papers by "Braunschweig University of Technology published in 2016"

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

Abstract: In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure flux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation, it is imperative to target by gene knockout or RNA interference more than one autophagy-related protein. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways implying that not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular assays, we hope to encourage technical innovation in the field.

The Magnetospheric Multiscale Magnetometers

Abstract: The success of the Magnetospheric Multiscale mission depends on the accurate measurement of the magnetic field on all four spacecraft. To ensure this success, two independently designed and built fluxgate magnetometers were developed, avoiding single-point failures. The magnetometers were dubbed the digital fluxgate (DFG), which uses an ASIC implementation and was supplied by the Space Research Institute of the Austrian Academy of Sciences and the analogue magnetometer (AFG) with a more traditional circuit board design supplied by the University of California, Los Angeles. A stringent magnetic cleanliness program was executed under the supervision of the Johns Hopkins University’s Applied Physics Laboratory. To achieve mission objectives, the calibration determined on the ground will be refined in space to ensure all eight magnetometers are precisely inter-calibrated. Near real-time data plays a key role in the transmission of high-resolution observations stored on board so rapid processing of the low-resolution data is required. This article describes these instruments, the magnetic cleanliness program, and the instrument pre-launch calibrations, the planned in-flight calibration program, and the information flow that provides the data on the rapid time scale needed for mission success.

SCONE: secure Linux containers with Intel SGX

Abstract: In multi-tenant environments, Linux containers managed by Docker or Kubernetes have a lower resource footprint, faster startup times, and higher I/O performance compared to virtual machines (VMs) on hypervisors. Yet their weaker isolation guarantees, enforced through software kernel mechanisms, make it easier for attackers to compromise the confidentiality and integrity of application data within containers.We describe SCONE, a secure container mechanism for Docker that uses the SGX trusted execution support of Intel CPUs to protect container processes from outside attacks. The design of SCONE leads to (i) a small trusted computing base (TCB) and (ii) a low performance overhead: SCONE offers a secure C standard library interface that transparently encrypts/decrypts I/O data; to reduce the performance impact of thread synchronization and system calls within SGX enclaves, SCONE supports user-level threading and asynchronous system calls. Our evaluation shows that it protects unmodified applications with SGX, achieving 0.6×-1.2× of native throughput.

Prebiotic chemicals—amino acid and phosphorus—in the coma of comet 67P/Churyumov-Gerasimenko

Abstract: The importance of comets for the origin of life on Earth has been advocated for many decades. Amino acids are key ingredients in chemistry, leading to life as we know it. Many primitive meteorites contain amino acids, and it is generally believed that these are formed by aqueous alterations. In the collector aerogel and foil samples of the Stardust mission after the flyby at comet Wild 2, the simplest form of amino acids, glycine, has been found together with precursor molecules methylamine and ethylamine. Because of contamination issues of the samples, a cometary origin was deduced from the 13C isotopic signature. We report the presence of volatile glycine accompanied by methylamine and ethylamine in the coma of 67P/Churyumov-Gerasimenko measured by the ROSINA (Rosetta Orbiter Spectrometer for Ion and Neutral Analysis) mass spectrometer, confirming the Stardust results. Together with the detection of phosphorus and a multitude of organic molecules, this result demonstrates that comets could have played a crucial role in the emergence of life on Earth.

A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering

Abstract: Environmentally-friendly monofilament cellulosic fibres have been widely used as alternatives for conventional steel reinforcement within concrete. Recently, the use of cellulosic fibre fabrics and their fabric reinforced polymer composites as reinforcement materials within and/or outside of construction materials (e.g. concrete) has gained popularity due to their inexpensive cost and favourable specific mechanical properties compared with synthetic fibre fabrics (e.g. E-glass). This review presents a summary of recent development on cellulosic fibre Fabric Reinforced Cementitious (FRC) and Fabric Reinforced Geopolymer (FRG) composites, as well as their cellulosic Fabric Reinforced Polymer (FRP) composites as reinforcements of concrete, masonry and timber structures for civil engineering applications. This review covers: (1) properties (i.e. chemical composition, microstructure, mechanical properties and cost) of monofilament cellulosic fibres and their comparison with synthetic fibres, the relationship between fibre chemical composition and fibre mechanical properties, parameters affect fibre properties; (2) properties (e.g. fabrication of monofilament fibres to fabrics and structures) of cellulosic fibre fabrics, properties of polymer matrices, and properties (i.e. flexural, tensile, impact, insulation and fire properties) of cellulosic fabric FRP composites; and (3) properties (compressive, flexural and tensile and impact properties) of cellulosic FRC and FRG composites, and the properties of cellulosic FRP composites reinforced concrete, masonry and timber structures. In addition, the degradation mechanisms of cellulosic FRC and FRP are discussed. Furthermore, the durability of FRC, FRG and FRP composites are reviewed and the methods to improve the durability of FRC, FRG and FRP composites from the aspects of fibre modification and matrix modification are reviewed and summarized.

Visualizing antibody affinity maturation in germinal centers

Abstract: Antibodies somatically mutate to attain high affinity in germinal centers (GCs). There, competition between B cell clones and among somatic mutants of each clone drives an increase in average affinity across the population. The extent to which higher-affinity cells eliminating competitors restricts clonal diversity is unknown. By combining multiphoton microscopy and sequencing, we show that tens to hundreds of distinct B cell clones seed each GC and that GCs lose clonal diversity at widely disparate rates. Furthermore, efficient affinity maturation can occur in the absence of homogenizing selection, ensuring that many clones can mature in parallel within the same GC. Our findings have implications for development of vaccines in which antibodies with nonimmunodominant specificities must be elicited, as is the case for HIV-1 and influenza.

Materials Pushing the Application Limits of Wire Grid Polarizers further into the Deep Ultraviolet Spectral Range

Abstract: Wire grid polarizers (WGPs), periodic nano-optical metasurfaces, are convenient polarizing elements for many optical applications. However, they are still inadequate in the deep ultraviolet spectral range. It is shown that to achieve high performance ultraviolet WGPs a material with large absolute value of the complex permittivity and extinction coefficient at the wavelength of interest has to be utilized. This requirement is compared to refractive index models considering intraband and interband absorption processes. It is elucidated why the extinction ratio of metallic WGPs intrinsically humble in the deep ultraviolet, whereas wide bandgap semiconductors are superior material candidates in this spectral range. To demonstrate this, the design, fabrication, and optical characterization of a titanium dioxide WGP are presented. At a wavelength of 193 nm an unprecedented extinction ratio of 384 and a transmittance of 10% is achieved.

Phage display-derived human antibodies in clinical development and therapy

Abstract: Over the last 3 decades, monoclonal antibodies have become the most important class of therapeutic biologicals on the market. Development of therapeutic antibodies was accelerated by recombinant DNA technologies, which allowed the humanization of murine monoclonal antibodies to make them more similar to those of the human body and suitable for a broad range of chronic diseases like cancer and autoimmune diseases. In the early 1990s in vitro antibody selection technologies were developed that enabled the discovery of “fully” human antibodies with potentially superior clinical efficacy and lowest immunogenicity.Antibody phage display is the first and most widely used of the in vitro selection technologies. It has proven to be a robust, versatile platform technology for the discovery of human antibodies and a powerful engineering tool to improve antibody properties. As of the beginning of 2016, 6 human antibodies discovered or further developed by phage display were approved for therapy. In 2002, ada...

A phase-field model for ductile fracture at finite strains and its experimental verification

Abstract: In this paper, a phase-field model for ductile fracture previously proposed in the kinematically linear regime is extended to the three-dimensional finite strain setting, and its predictions are qualitatively and quantitatively compared with several experimental results, both from ad-hoc tests carried out by the authors and from the available literature. The proposed model is based on the physical assumption that fracture occurs when a scalar measure of the accumulated plastic strain reaches a critical value, and such assumption is introduced through the dependency of the phase-field degradation function on this scalar measure. The proposed model is able to capture the experimentally observed sequence of elasto-plastic deformation, necking and fracture phenomena in flat specimens; the occurrence of cup-and-cone fracture patterns in axisymmetric specimens; the role played by notches and by their size on the measured displacement at fracture; and the sequence of distinct cracking events observed in more complex specimens.

Optical phonons in methylammonium lead halide perovskites and implications for charge transport

Abstract: Lead-halide perovskites are promising materials for opto-electronic applications. Recent reports indicated that their mechanical and electronic properties are strongly affected by the lattice vibrations. Herein we report far-infrared spectroscopy measurements of CH3NH3Pb(I/Br/Cl)3 thin films and single crystals at room temperature and a detailed quantitative analysis of the spectra. We find strong broadening and anharmonicity of the lattice vibrations for all three halide perovskites, which indicates dynamic disorder of the lead-halide cage at room temperature. We determine the frequencies of the transversal and longitudinal optical phonons, and use them to calculate, via appropriate models, the static dielectric constants, polaron masses, electron–phonon coupling constants, and upper limits for the phonon-scattering limited charge carrier mobilities. Within the limitations of the model used, we can place an upper limit of 200 cm2 V−1 s−1 for the room temperature charge carrier mobility in MAPbI3 single crystals. Our findings are important for the basic understanding of charge transport processes and mechanical properties in metal halide perovskites.

Optical Phonons in Methylammonium Lead Halide Perovskites and Implications for Charge Transport

Abstract: Lead-halide perovskites are promising materials for opto-electronic applications. Recent reports indicated that their mechanical and electronic properties are strongly affected by the lattice vibrations. Herein we report far-infrared spectroscopy measurements of CH$_{3}$NH$_{3}$Pb(I/Br/Cl)$_{3}$ thin films and single crystals at room temperature and a detailed quantitative analysis of the spectra. We find strong broadening and anharmonicity of the lattice vibrations for all three halide perovskites, which indicates dynamic disorder of the lead-halide cage at room temperature. We determine the frequencies of the transversal and longitudinal optical phonons, and use them to calculate, via appropriate models, the static dielectric constants, polaron masses, electron-phonon coupling constants, and upper limits for the phonon-scattering limited charge carrier mobilities. Within the limitations of the model used, we can place an upper limit of 200$\,$cm$^{2}$V$^{-1}$s$^{-1}$ for the room temperature charge carrier mobility in MAPbI$_{3}$ single crystals. Our findings are important for the basic understanding of charge transport processes and mechanical properties in metal halide perovskites.

Molecular force spectroscopy with a DNA origami–based nanoscopic force clamp

Abstract: Forces in biological systems are typically investigated at the single-molecule level with atomic force microscopy or optical and magnetic tweezers, but these techniques suffer from limited data throughput and their requirement for a physical connection to the macroscopic world. We introduce a self-assembled nanoscopic force clamp built from DNA that operates autonomously and allows massive parallelization. Single-stranded DNA sections of an origami structure acted as entropic springs and exerted controlled tension in the low piconewton range on a molecular system, whose conformational transitions were monitored by single-molecule Forster resonance energy transfer. We used the conformer switching of a Holliday junction as a benchmark and studied the TATA-binding protein–induced bending of a DNA duplex under tension. The observed suppression of bending above 10 piconewtons provides further evidence of mechanosensitivity in gene regulation.

AsyncShock: Exploiting Synchronisation Bugs in Intel SGX Enclaves

Abstract: Intel’s Software Guard Extensions (SGX) provide a new hardware-based trusted execution environment on Intel CPUs using secure enclaves that are resilient to accesses by privileged code and physical attackers. Originally designed for securing small services, SGX bears promise to protect complex, possibly cloud-hosted, legacy applications. In this paper, we show that previously considered harmless synchronisation bugs can turn into severe security vulnerabilities when using SGX. By exploiting use-after-free and time-of-check-to-time-of-use (TOCTTOU) bugs in enclave code, an attacker can hijack its control flow or bypass access control.

Evolution of the Dust Size Distribution of Comet 67P/Churyumov-Gerasimenko from 2.2. AU to Perihelion

Abstract: The Rosetta probe, orbiting Jupiter-family comet 67P/Churyumov–Gerasimenko, has been detecting individual dust particles of mass larger than 10−10 kg by means of the GIADA dust collector and the OSIRIS Wide Angle Camera and Narrow Angle Camera since 2014 August and will continue until 2016 September. Detections of single dust particles allow us to estimate the anisotropic dust flux from 67P, infer the dust loss rate and size distribution at the surface of the sunlit nucleus, and see whether the dust size distribution of 67P evolves in time. The velocity of the Rosetta orbiter, relative to 67P, is much lower than the dust velocity measured by GIADA, thus dust counts when GIADA is nadir-pointing will directly provide the dust flux. In OSIRIS observations, the dust flux is derived from the measurement of the dust space density close to the spacecraft. Under the assumption of radial expansion of the dust, observations in the nadir direction provide the distance of the particles by measuring their trail length, with a parallax baseline determined by the motion of the spacecraft. The dust size distribution at sizes >1 mm observed by OSIRIS is consistent with a differential power index of −4, which was derived from models of 67P's trail. At sizes <1 mm, the size distribution observed by GIADA shows a strong time evolution, with a differential power index drifting from −2 beyond 2 au to −3.7 at perihelion, in agreement with the evolution derived from coma and tail models based on ground-based data. The refractory-to-water mass ratio of the nucleus is close to six during the entire inbound orbit and at perihelion.

The primordial nucleus of comet 67P/Churyumov-Gerasimenko

Abstract: We investigate the formation and evolution of comet nuclei and other trans-Neptunian objects (TNOs) in the solar nebula and primordial disk prior to the giant planet orbit instability foreseen by the Nice model. Aims. Our goal is to determine whether most observed comet nuclei are primordial rubble-pile survivors that formed in the solar nebula and young primordial disk or collisional rubble piles formed later in the aftermath of catastrophic disruptions of larger parent bodies. We also propose a concurrent comet and TNO formation scenario that is consistent with observations. Methods. We used observations of comet 67P/Churyumov-Gerasimenko by the ESA Rosetta spacecraft, particularly by the OSIRIS camera system, combined with data from the NASA Stardust sample-return mission to comet 81P/Wild 2 and from meteoritics; we also used existing observations from ground or from spacecraft of irregular satellites of the giant planets, Centaurs, and TNOs. We performed modeling of thermophysics, hydrostatics, orbit evolution, and collision physics. Results. We find that thermal processing due to short-lived radionuclides, combined with collisional processing during accretion in the primordial disk, creates a population of medium-sized bodies that are comparably dense, compacted, strong, heavily depleted in supervolatiles like CO and CO2; they contain little to no amorphous water ice, and have experienced extensive metasomatism and aqueous alteration due to liquid water. Irregular satellites Phoebe and Himalia are potential representatives of this population. Collisional rubble piles inherit these properties from their parents. Contrarily, comet nuclei have low density, high porosity, weak strength, are rich in supervolatiles, may contain amorphous water ice, and do not display convincing evidence of in situ metasomatism or aqueous alteration. We outline a comet formation scenario that starts in the solar nebula and ends in the primordial disk, that reproduces these observed properties, and additionally explains the presence of extensive layering on 67P/Churyumov-Gerasimenko (and on 9P/Tempel 1 observed by Deep Impact), its bi-lobed shape, the extremely slow growth of comet nuclei as evidenced by recent radiometric dating, and the low collision probability that allows primordial nuclei to survive the age of the solar system. Conclusions. We conclude that observed comet nuclei are primordial rubble piles, and not collisional rubble piles. We argue that TNOs formed as a result of streaming instabilities at sizes below ~400 km and that ~350 of these grew slowly in a low-mass primordial disk to the size of Triton, Pluto, and Eris, causing little viscous stirring during growth. We thus propose a dynamically cold primordial disk, which prevented medium-sized TNOs from breaking into collisional rubble piles and allowed the survival of primordial rubble-pile comets. We argue that comets formed by hierarchical agglomeration out of material that remained after TNO formation, and that this slow growth was a necessity to avoid thermal processing by short-lived radionuclides that would lead to loss of supervolatiles, and that allowed comet nuclei to incorporate ~3 Myr old material from the inner solar system.

Abrasive fine-finishing technology

Abstract: Abrasive fine-finishing technology is often applied as a final finishing process, and the selection of the right technology is crucial to obtaining the desired performance of functions such as fatigue life. This paper begins with classifications of the technology along with fundamentals and brief histories of the individual methods. The material removal mechanisms, specific energies, and finishing characteristics of the various technologies are summarized giving assessments of the surfaces created by them. Guidelines developed for selecting the appropriate methods, and case studies illustrate the effectiveness of various methods. This paper ends with a discussion of the future prospects of the technology. (C) 2016

A new methodological framework for design for additive manufacturing

Abstract: Additive manufacturing (AM) offers numerous benefits for innovative design solutions. However, engineers are currently not supported in identifying and incorporating these potentials systematically in their design solutions. In this paper, previous Design for Additive Manufacturing (DfAM) approaches are first reviewed comprehensively and classified into distinct categories according to their main purpose and application. They are then analysed further by being related to conventional design methodologies like VDI 2221. Since previous DfAM approaches only provide selective assistance at single steps in the product development process, a new framework for DfAM is proposed. Existing methods and tools, both from DfAM and from general design methodologies, are integrated into the modular framework structure. A concept for using the framework is presented to provide design engineers with continuous support in all product development phases, thereby fostering the complete exploitation of AM potentials an...

Sulphur-bearing species in the coma of comet 67P/Churyumov–Gerasimenko

Abstract: Several sulphur-bearing species have already been observed in different families of comets. However, the knowledge on the minor sulphur species is still limited. The comet's sulphur inventory is closely linked to the pre-solar cloud and holds important clues to the degree of reprocessing of the material in the solar nebula and during comet accretion. Sulphur in pre-solar clouds is highly depleted, which is quite puzzling as the S/O ratio in the diffuse interstellar medium is cosmic. This work focuses on the abundance of the previously known species H 2 S, OCS, SO, S 2 , SO 2 and CS 2 in the coma of comet 67P/Churyumov–Gerasimenko measured by Rosetta Orbiter Spectrometer for Ion and Neutral Analysis/Double Focusing Mass Spectrometer between equinox and perihelion 2015. Furthermore, we present the first detection of S 3 , S 4 , CH 3 SH and C 2 H 6 S in a comet, and we determine the elemental abundance of S/O in the bulk ice of (1.47 ± 0.05) × 10 −2 . We show that SO is present in the coma originating from the nucleus, but not CS in the case of 67P, and for the first time establish that S 2 is present in a volatile and a refractory phase. The derived total elemental sulphur abundance of 67P is in agreement with solar photospheric elemental abundances and shows no sulphur depletion as reported for dense interstellar clouds. Also the presence of S 2 at heliocentric distances larger than 3 au indicates that sulphur-bearing species have been processed by radiolysis in the pre-solar cloud and that at least some of the ice from this cloud has survived in comets up the present.

Non-Uniform Constellations for ATSC 3.0

Abstract: This paper introduces the concept of a non-uniform constellation (NUC) in contrast to conventional uniform quadrature-amplitude modulation (QAM) constellations. Such constellations provide additional shaping gain, which allows reception at lower signal-to-noise ratios. ATSC3.0 will be the first major broadcasting standard, which completely uses NUCs due to their outstanding properties. We will consider different kinds of NUCs and describe their performance: 2-D NUCs provide more shaping gain at the cost of higher demapping complexity, while 1-D NUCs allow low-complexity demapping at slightly lower shaping gains. These NUCs are well suited for very large constellations sizes, such as 1k and 4k QAM.

Analysis of Lithium-Ion Battery Models Based on Electrochemical Impedance Spectroscopy

Abstract: This work is an overview of various equivalent circuits (ECs) containing various degrees of detail. The ECs are evaluated in terms of model accuracy and parameterization time for the systematic assignment of an equivalent circuit to application fields. For this purpose, impedance spectra were measured using electrochemical impedance spectroscopy at different states of charge, health and temperatures. Then the parameters of the EC were extracted using the least-squares method and the Levenberg–Marquardt algorithm. After comparing the simulated to the measured impedance spectrum, a review and assignment of equivalent circuits for potential applications is given. Simple equivalent circuits with a series resistor and a maximum of two resistance–capacitance (RC) elements are ideal for simulations with lower dynamics. Equivalent circuits with up to five RC elements or even a constant-phase element (CPE) are promising for simulating highly dynamic processes. By using RCPE elements the impedance spectrum can be modeled with the highest accuracy, which is why this type of model should be used for diagnostic purposes.

Diversified actin protrusions promote environmental exploration but are dispensable for locomotion of leukocytes

Abstract: Most migrating cells extrude their front by the force of actin polymerization. Polymerization requires an initial nucleation step, which is mediated by factors establishing either parallel filaments in the case of filopodia or branched filaments that form the branched lamellipodial network. Branches are considered essential for regular cell motility and are initiated by the Arp2/3 complex, which in turn is activated by nucleation-promoting factors of the WASP and WAVE families. Here we employed rapid amoeboid crawling leukocytes and found that deletion of the WAVE complex eliminated actin branching and thus lamellipodia formation. The cells were left with parallel filaments at the leading edge, which translated, depending on the differentiation status of the cell, into a unipolar pointed cell shape or cells with multiple filopodia. Remarkably, unipolar cells migrated with increased speed and enormous directional persistence, while they were unable to turn towards chemotactic gradients. Cells with multiple filopodia retained chemotactic activity but their migration was progressively impaired with increasing geometrical complexity of the extracellular environment. These findings establish that diversified leading edge protrusions serve as explorative structures while they slow down actual locomotion.

SecureKeeper: Confidential ZooKeeper using Intel SGX

Abstract: Cloud computing, while ubiquitous, still suffers from trust issues, especially for applications managing sensitive data. Third-party coordination services such as ZooKeeper and Consul are fundamental building blocks for cloud applications, but are exposed to potentially sensitive application data. Recently, hardware trust mechanisms such as Intel's Software Guard Extensions (SGX) offer trusted execution environments to shield application data from untrusted software, including the privileged Operating System (OS) and hypervisors. Such hardware support suggests new options for securing third-party coordination services.We describe SecureKeeper, an enhanced version of the ZooKeeper coordination service that uses SGX to preserve the confidentiality and basic integrity of ZooKeeper-managed data. SecureKeeper uses multiple small enclaves to ensure that (i) user-provided data in ZooKeeper is always kept encrypted while not residing inside an enclave, and (ii) essential processing steps that demand plaintext access can still be performed securely. SecureKeeper limits the required changes to the ZooKeeper code base and relies on Java's native code support for accessing enclaves. With an overhead of 11%, the performance of SecureKeeper with SGX is comparable to ZooKeeper with secure communication, while providing much stronger security guarantees with a minimal trusted code base of a few thousand lines of code.

Selenium and nano-selenium in plant nutrition

Abstract: Selenium (Se) is a naturally occurring metalloid element which occurs nearly in all environments. Se is considered as a finite and non-renewable resource on the Earth. The common sources of Se in earth’s crust occur in association with sulfide minerals such as metal selenide, whereas it is rarely found in elemental form (Se0). While there is no evidence of Se need for higher plants, several reports show that when Se added at low concentrations, Se exerts beneficial effects on plant growth. Se may act as quasi-essential micronutrient through altering different physiological and biochemical traits. Thus, plants vary considerably in their physiological and biochemical response to Se. This review focusses on the physiological importance of Se forms as well as different Se fertilizers for higher plants, especially plant growth, uptake, transport, and metabolism.

Magnetic-field dependence of Brownian and Néel relaxation times

Abstract: The investigation of the rotational dynamics of magnetic nanoparticles in magnetic fields is of academic interest but also important for applications such as magnetic particle imaging where the particles are exposed to magnetic fields with amplitudes of up to 25 mT. We have experimentally studied the dependence of Brownian and Neel relaxation times on ac and dc magnetic field amplitude using ac susceptibility measurements in the frequency range between 2 Hz and 9 kHz for field amplitudes up to 9 mT. As samples, single-core iron oxide nanoparticles with core diameters between 20 nm and 30 nm were used either suspended in water-glycerol mixtures or immobilized by freeze-drying. The experimentally determined relaxation times are compared with theoretical models. It was found that the Neel relaxation time decays much faster with increasing field amplitude than the Brownian one. Whereas the dependence of the Brownian relaxation time on the ac and dc field amplitude can be well explained with existing theoretic...

One-world chemistry and systems thinking

Abstract: The practice and overarching mission of chemistry need a major overhaul in order to be fit for purpose in the twenty-first century and beyond. The concept of 'one-world' chemistry takes a systems approach that brings together many factors, including ethics and sustainability, that are critical to the future role of chemistry.