Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, a four-factor five-level central composite rotatable design matrix with full replication for planning, conduction, execution and development of mathematical models is proposed for predicting the weld bead quality and selecting optimum process parameters for achieving the desired quality and process optimization.
502 citations
••
TL;DR: In this paper, the authors have focused on the strength behaviour of the soil reinforced with randomly included sisal fibre. And the results of these tests have clearly shown a significant improvement in the failure deviator stress, Shear strength parameters (C and φ) of the studied soil.
330 citations
••
TL;DR: In this paper, the fabrication of aluminum (6061-T6) matrix composites (AMCs) reinforced with various weight percentage of B 4 C particulates by modified stir casting route is discussed.
323 citations
••
TL;DR: In this paper, the performance of metal matrix composite (MMC) has been analyzed with the help of a pin on disc wear and friction monitor to reveal the improved specific strength as well as wear resistance.
Abstract: Metal matrix composite (MMC) focuses primarily on improved specific strength, high temperature and wear resistance application Aluminium matrix reinforced with titanium carbide (Al–TiC p ) has good potential The main challenge is to produce this composite in a cost effective way to meet the above requirements In this study Al–TiC p castings with different volume fraction of TiC were produced in an argon atmosphere by an enhanced stir casting method Specific strength of the composite has increased with higher % of TiC addition Dry sliding wear behaviour of AMC was analysed with the help of a pin on disc wear and friction monitor The present analyses reveal the improved specific strength as well as wear resistance
257 citations
••
TL;DR: In this article, the effect of tool rotational speed and pin profile on the microstructure and tensile strength of the joints were studied, and the results showed that the tool speed and the pin profile considerably influenced the micro-structure of the joint.
244 citations
Authors
Showing all 973 results
Name | H-index | Papers | Citations |
---|---|---|---|
Isaac Dinaharan | 36 | 115 | 3452 |
S. Velumani | 31 | 181 | 3276 |
Natesan Balasubramanian | 29 | 129 | 3032 |
N. Muthukumarasamy | 27 | 156 | 2377 |
N. Murugan | 27 | 40 | 3691 |
Ashok Kumar | 25 | 198 | 2558 |
N. Murugan | 25 | 64 | 1564 |
Mariyappan Thambidurai | 24 | 107 | 1467 |
Santhanam Agilan | 22 | 78 | 1164 |
V. Selladurai | 20 | 100 | 1261 |
P. Balraju | 18 | 34 | 1018 |
Jovitha Jerome | 16 | 60 | 1080 |
Marimuthu Thirumarimurugan | 16 | 51 | 959 |
K. Subramanian | 15 | 33 | 1020 |
S. Suresh Kumar | 15 | 66 | 1235 |