Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

About: Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan is a education organization based out in Dnipro, Ukraine. It is known for research contribution in the topics: Track (rail transport) & Bogie. The organization has 736 authors who have published 655 publications receiving 1468 citations. The organization is also known as: Institute of Railway Transport Engineers.

Improving the efficiency of the heating system for public buildings infrastructure in the context of dnurt

Abstract: Purpose. The paper analyses the possibility and terms of increasing the efficiency of heating and ventilation systems of public buildings at the present stage of development and the specific climatic conditions of Ukraine. The main purpose is to develop specific measures for public buildings, which will lead to a significant reduction in energy costs for heating and air conditioning system. The example is similar system of DNURT compact campus, which is heated with its own autonomous boiler that uses natural gas . Methodology . The statistical heat loss analysis for the last 5 years allows defining the types and calculating the heat loss values for specific conditions. These losses are compared with those in the world practice and based on the comparison and analysis of the current system there are offered the ways to reduce the heat loss values through the use of various technical and organizational methods. The paper also proposes involvement for this purpose of secondary and alternative energy sources. The secondary energy resources include the heat that is emitted by people and that coming out with the air during ventilation of buildings. The renewable sources include solar and geothermal energy. To enhance the heat transfer medium temperature capacity it is proposed to use the heat pumps. Findings . The maximum possible use of the proposed measures and implementation of rational schematic and engineering solutions for heat and hot water supply systems cam reduce the energy loss for heating and hot water by 30-35%. Originality . The paper for the first time proposed the use of new integrated approaches to maintain the desired heat balance in the winter period, as well as the new schematic solutions for heating and ventilation systems, both in winter and in summer, based on the use of heat pumps and secondary energy resources. Practical value . The introduction of the proposed schematic solutions and approaches demand relatively small capital investments and do not require significant reconstruction of already installed systems.

Basic principles of transport tourism development in Ukraine

Abstract: Purpose. Undeveloped infrastructure and the system of public and tourist transport services prevent boom and spread of tourism glory of the country. Therefore, the development of tourist infrastructure and transport communication routes is a priority task. Methodology. Article methodology is based on the use of consequent methodological technique. Findings. Author analyzed the situation of tourism industry in Ukraine, set the basic principles for the tourism development and its priorities. The article contains the author's point of view on the fact that the tourism industry is of paramount importance to the state economics, and the development of this sector of public life should be a priority task for the near future. Originality. According to the author, the development of the inbound tourism is more reasonable, because it provides additional workplaces and exchange earnings. The author insists that the raise of quality level of domestic tourist services to the European standards would accelerate the development of Ukrainian tourism and would attract more holidaymakers from Ukraine and neighbouring countries. Practical value. The rational measures, which were taken regarding the proposed directions for the tourism development, can improve competitiveness of the Ukrainian tourist industry on the European tourist market.

Minimization of the chemical pollution level at the working zones in open areas using screens

Abstract: Purpose. The scientific work aims to develop a new method for assessing the level of chemical air pollution in working zones located in open areas near highways using screens of different heights. Methodology. The analytical method for calculating the airflow velocity field near protective screens is based on the mathematical apparatus of the theory of complex variable functions, which allows obtaining the value of the velocity potential and the flow function, to calculate the velocity value at any point of the plane with a screen of different height. The obtained velocity field is used to calculate the level of carbon monoxide concentration in the numerical solution of the two-dimensional mass transfer equation. Findings. The developed program of numerical calculation allows conducting computational experiments on the effectiveness of the use of protective screens, taking into account changes in their geometry and meteorological conditions. The developed method based on the obtained concentration field makes it possible to carry out an assessment of the risk of chronic intoxication for the employees of the take-out trade, who are within the zone of the emission source (highway) for a long time. Originality . The regularities of changes in the concentration of carbon monoxide are established depending on the distance to the emission source at a height of 2 m from the ground in the presence of a screen of a certain height and in its absence. A risk assessment of chronic carbon monoxide intoxication has been carried out for take-out trade workers near the highway. It is shown that the presence of the screen reduces the risk of chronic CO intoxication by 10% as compared to its absence. Increasing the screen height to 1.8 m reduces the risk of chronic intoxication by 6% relatively to the situation when the screen height is 1.2 m. Practical value. The developed numerical-analytical method for calculating the level of chemical pollution in working zones in open areas and the program «Screen» created on its basis allow us to carry out a prompt forecast of atmospheric air pollution level with carbon monoxide taking into account the effectiveness of the screens. Quantitative results are necessary at the planning stage of trading places near highways, during the architectural-planned reorganization of adjacent developments.

Studies of the conditions of the interval speed control rolling unhook on automated slides

Abstract: Research of braking mode optimization under uncertainty of information about rolling down cuts and inaccurate realization of control actions by retarder positions is presented in the paper. The probability criterion for evaluation of conditions of sorting cuts is proposed.

Reduction in cuts speed at the beginning of a sorting sidings, equipped with quasi-continuous speed control system

Abstract: Purpose. Clear and uninterrupted operation of humps depends on the quality of technical equipment and control technology of cuts speed. Technology of interval and purposive regulation of cuts speed is used at most humps. The article discusses ways to reduce the cuts rolling speed to a safe level at the beginning of the sorting sidings equipped with quasi-continuous speed control system. Methodology. It proposed three fundamentally different ways to reduce the cuts rolling speed at the beginning of the sorting siding. The analysis of the ways to reduce cuts rolling speed to a safe level at the beginning of the sorting sidings was conducted using simulation the process of cuts rolling from humps equipped with quasi-continuous speed control. Findings. As a result of analysis, the inappropriateness of opposite elevation using on the roll-out part of the hump after the last separation switch point. Spot regulators of cars speed can be used to reduce the cuts rolling speed at the beginning of the sorting siding, but this leads to a division conditions deterioration on the last separating switch points of long cuts with the following after them short cuts. Reducing the cuts rolling speed at the beginning of the sorting siding can be carried out using the beam on a stationary wagon retarders park brake position. Control Algorithm park brake position is quite simple. All produce should be unhooked from it at a safe speed. If the accuracy of the implementation of the set speed output to unhook from the park brake position is low, it is possible to eliminate the error of point regulators cars speed. Originality. The question where to start location point of wagon retarders zone to reduce speed to cut level requires additional research. Reducing rolling cut the speed at the beginning of the sorting sidings can be carried out using the beam on a stationary wagon retarders park brake position. Practical value . Control Algorithm park brake position is quite simple. All produce should be cut from it at a safe speed. If the accuracy of the implementation of the set speed output to cut from the park brake position is low, it is possible to eliminate the error of point regulators cars speed.