Donghua University

About: Donghua University is a education organization based out in Shanghai, China. It is known for research contribution in the topics: Fiber & Nanofiber. The organization has 21155 authors who have published 21841 publications receiving 393091 citations. The organization is also known as: Dōnghuá Dàxué & China Textile University.

Bio-inspired vertebral design for scalable and flexible perovskite solar cells.

Abstract: The translation of unparalleled efficiency from the lab-scale devices to practical-scale flexible modules affords a huge performance loss for flexible perovskite solar cells (PSCs). The degradation is attributed to the brittleness and discrepancy of perovskite crystal growth upon different substrates. Inspired by robust crystallization and flexible structure of vertebrae, herein, we employ a conductive and glued polymer between indium tin oxide and perovskite layers, which simultaneously facilitates oriented crystallization of perovskite and sticks the devices. With the results of experimental characterizations and theoretical simulations, this bionic interface layer accurately controls the crystallization and acts as an adhesive. The flexible PSCs achieve the power conversion efficiencies of 19.87% and 17.55% at effective areas of 1.01 cm2 and 31.20 cm2 respectively, retaining over 85% of original efficiency after 7000 narrow bending cycles with negligible angular dependence. Finally, the modules are assembled into a wearable solar-power source, enabling the upscaling of flexible electronics.

Friction and Wear Properties of Different Types of Graphene Nanosheets as Effective Solid Lubricants.

Abstract: Friction and wear properties of graphene nanosheets prepared by different processes as solid lubricant on silicon dioxide have been comparatively studied via calibrated atomic force microscopy. The effects of normal load, humidity, and velocity on the friction were also investigated. All kinds of graphene nanosheets possess friction-reduction properties on the nanoscale. Mechanically exfoliated graphene nanosheets exhibit ultralubrication and zero wear under high pressure due to perfect graphitic structure and a hydrophobic surface. Defects in chemical vapor deposited graphene nanosheets decrease the antiwear and friction-reduction capability. The graphene oxide nanosheets (GOS) show the weakest friction-reduction properties on account of destroyed graphitic structure and a hydrophilic surface. The reduced graphene oxide nanosheets (RGOS) possess better friction reduction than GOS by virtue of hydrophobic surface properties. Both RGOS and GOS have weak antiwear properties due to the destroyed graphitic st...

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

Abstract: We developed an upper-limb power-assist exoskeleton actuated by pneumatic muscles. The exoskeleton included two metal links: a nylon joint, four size-adjustable carbon fiber bracers, a potentiometer and two pneumatic muscles. The proportional myoelectric control method was proposed to control the exoskeleton according to the user's motion intention in real time. With the feature extraction procedure and the classification (back-propagation neural network), an electromyogram (EMG)-angle model was constructed to be used for pattern recognition. Six healthy subjects performed elbow flexion-extension movements under four experimental conditions: (1) holding a 1-kg load, wearing the exoskeleton, but with no actuation and for different periods (2-s, 4-s and 8-s periods); (2) holding a 1-kg load, without wearing the exoskeleton, for a fixed period; (3) holding a 1-kg load, wearing the exoskeleton, but with no actuation, for a fixed period; (4) holding a 1-kg load, wearing the exoskeleton under proportional myoelectric control, for a fixed period. The EMG signals of the biceps brachii, the brachioradialis, the triceps brachii and the anconeus and the angle of the elbow were collected. The control scheme's reliability and power-assist effectiveness were evaluated in the experiments. The results indicated that the exoskeleton could be controlled by the user's motion intention in real time and that it was useful for augmenting arm performance with neurological signal control, which could be applied to assist in elbow rehabilitation after neurological injury.

Iron Robustly Stimulates Simultaneous Nitrification and Denitrification Under Aerobic Conditions.

Abstract: Simultaneous nitrification and denitrification (SND) is a promising single-reactor biological nitrogen-removal method. Activated sludge with and without iron scrap supplementation (Sludge-Fe and Sludge-C, respectively) was acclimated under aerobic condition. The total nitrogen (TN) content of Sludge-Fe substantially decreased from 25.0 ± 1.0 to 11.2 ± 0.4 mg/L, but Sludge-C did not show the TN-removal capacity. Further investigations excluded a chemical reduction of NO3--N by iron and a decrease of NH4+-N by microbial assimilation, and the contribution of SND was verified. Moreover, the amount of aerobic denitrifiers, such as bacteria belonging to the genera Thauera, Thermomonas, Rhodobacter, and Hyphomicrobium, was considerably enhanced, as observed through Miseq Illumina sequencing method. The activities of the key enzymes ammonia monooxygenase (AMO) and nitrite oxidoreductase (NXR), which are associated with nitrification, and periplasmic nitrate reductase (NAP) and nitrite reductase (NIR), which are related to denitrification, in Sludge-Fe were 1.23-, 1.53-, 3.60-, and 1.55-fold higher than those in Sludge-C, respectively. In Sludge-Fe, the quantity of the functional gene NapA encoding enzyme NAP, which is essential for aerobic denitrification, was significantly promoted. The findings indicate that SND is the primary mechanism underlying the removal of TN and that iron scrap can robustly stimulate SND under aerobic environment.