scispace - formally typeset
Search or ask a question
Institution

Donghua University

EducationShanghai, China
About: Donghua University is a education organization based out in Shanghai, China. It is known for research contribution in the topics: Fiber & Nanofiber. The organization has 21155 authors who have published 21841 publications receiving 393091 citations. The organization is also known as: Dōnghuá Dàxué & China Textile University.
Topics: Fiber, Nanofiber, Membrane, Electrospinning, Catalysis


Papers
More filters
Journal ArticleDOI
Ji-Huan He1
TL;DR: Wazwaz et al. as mentioned in this paper applied homotopy perturbation method to nonlinear boundary value problems and compared the result obtained by the present method with that obtained by Adomian method.

1,112 citations

Journal ArticleDOI
15 Nov 2011-ACS Nano
TL;DR: Under the irradiation of 980 nm laser with the conservative and safe power density over a short period, cancer cells in vivo can be efficiently killed by the photothermal effects of the Cu(9)S(5) NCs.
Abstract: Photothermal ablation (PTA) therapy has a great potential to revolutionize conventional therapeutic approaches for cancers, but it has been limited by difficulties in obtaining biocompatible photothermal agents that have low cost, small size (<100 nm), and high photothermal conversion efficiency. Herein, we have developed hydrophilic plate-like Cu(9)S(5) nanocrystals (NCs, a mean size of ∼70 nm × 13 nm) as a new photothermal agent, which are synthesized by combining a thermal decomposition and ligand exchange route. The aqueous dispersion of as-synthesized Cu(9)S(5) NCs exhibits an enhanced absorption (e.g., ∼1.2 × 10(9) M(-1) cm(-1) at 980 nm) with the increase of wavelength in near-infrared (NIR) region, which should be attributed to localized surface plasmon resonances (SPR) arising from p-type carriers. The exposure of the aqueous dispersion of Cu(9)S(5) NCs (40 ppm) to 980 nm laser with a power density of 0.51 W/cm(2) can elevate its temperature by 15.1 °C in 7 min; a 980 nm laser heat conversion efficiency reaches as high as 25.7%, which is higher than that of the as-synthesized Au nanorods (23.7% from 980 nm laser) and the recently reported Cu(2-x)Se NCs (22% from 808 nm laser). Importantly, under the irradiation of 980 nm laser with the conservative and safe power density over a short period (∼10 min), cancer cells in vivo can be efficiently killed by the photothermal effects of the Cu(9)S(5) NCs. The present finding demonstrates the promising application of the Cu(9)S(5) NCs as an ideal photothermal agent in the PTA of in vivo tumor tissues.

1,064 citations

Book ChapterDOI
01 Jan 2014
TL;DR: In this paper, a brief analysis of nanofibers used for advanced energy and environmental applications in the past decade indicates that their impact has been realized well and is encouraging, and will continually represent a key technology to ensure sustainable energy and preserve our environment for the future.
Abstract: Energy and environment will head the list of top global issues facing society for the next 50 years. Nanotechnology is responding to these challenges by designing and fabricating functional nanofibers optimized for energy and environmental applications. The route toward these nano-objects is based primarily on electrospinning: a highly versatile method that allows the fabrication of continuous fibers with diameters down to a few nanometers. The mechanism responsible for the fiber formation mainly includes the Taylor Cone theory and flight-instability theory, which can be predicted theoretically and controlled experimentally. Moreover, the electrospinning has been applied to natural polymers, synthetic polymers, ceramics, and carbon. Fibers with complex architectures, such as ribbon fiber, porous fiber, core-shell fiber, or hollow fiber, can be produced by special electrospinning methods. It is also possible to produce nanofibrous membranes with designed aggregate structure including alignment, patterning, and two-dimensional nanonets. Finally, the brief analysis of nanofibers used for advanced energy and environmental applications in the past decade indicates that their impact has been realized well and is encouraging, and will continually represent a key technology to ensure sustainable energy and preserve our environment for the future.

1,044 citations

Journal ArticleDOI
TL;DR: In this paper, simultaneous measurements of atmospheric organic and elemental carbon (OC and EC) were taken during winter and summer seasons at 2003 in 14 cities in China, and PM2.5 samples were analyzed for OC and EC by the Interagency Monitoring of Protected Visual Environments (IMPROVE) thermal/optical reflectance protocol.
Abstract: [1] Simultaneous measurements of atmospheric organic and elemental carbon (OC and EC) were taken during winter and summer seasons at 2003 in 14 cities in China. Daily PM2.5 samples were analyzed for OC and EC by the Interagency Monitoring of Protected Visual Environments (IMPROVE) thermal/optical reflectance protocol. Average PM2.5 OC concentrations in the 14 cities were 38.1 μg m−3 and 13.8 μg m−3 for winter and summer periods, and the corresponding EC were 9.9 μg m−3 and 3.6 μg m−3, respectively. OC and EC concentrations had summer minima and winter maxima in all the cities. Carbonaceous matter (CM), the sum of organic matter (OM = 1.6 × OC) and EC, contributed 44.2% to PM2.5 in winter and 38.8% in summer. OC was correlated with EC (R2: 0.56–0.99) in winter, but correlation coefficients were lower in summer (R2: 0.003–0.90). Using OC/EC enrichment factors, the primary OC, secondary OC and EC accounted for 47.5%, 31.7% and 20.8%, respectively, of total carbon in Chinese urban environments. More than two thirds of China's urban carbon is derived from directly emitted particles. Average OC/EC ratios ranged from 2.0 to 4.7 among 14 cities during winter and from 2.1 to 5.9 during summer. OC/EC ratios in this study were consistent with a possible cooling effect of carbonaceous aerosols over China.

992 citations

Journal ArticleDOI
TL;DR: The demand for flexible/wearable electronic devices that have aesthetic appeal and multi-functionality has stimulated the rapid development of flexible supercapacitors with enhanced electrochemical performance and mechanical flexibility and current progress made with graphene-based electrodes is summarized.
Abstract: The demand for flexible/wearable electronic devices that have aesthetic appeal and multi-functionality has stimulated the rapid development of flexible supercapacitors with enhanced electrochemical performance and mechanical flexibility. After a brief introduction to flexible supercapacitors, we summarize current progress made with graphene-based electrodes. Two recently proposed prototypes for flexible supercapacitors, known as micro-supercapacitors and fiber-type supercapacitors, are then discussed. We also present our perspective on the development of graphene-based electrodes for flexible supercapacitors.

971 citations


Authors

Showing all 21321 results

NameH-indexPapersCitations
Dongyuan Zhao160872106451
Xiang Zhang1541733117576
Seeram Ramakrishna147155299284
Kuo-Chen Chou14348757711
Shuai Liu129109580823
Chao Zhang127311984711
Tao Zhang123277283866
Zidong Wang12291450717
Xinchen Wang12034965072
Zhenyu Zhang118116764887
Benjamin S. Hsiao10860241071
Qian Wang108214865557
Jian Zhang107306469715
Yan Zhang107241057758
Richard B. Kaner10655766862
Network Information
Related Institutions (5)
South China University of Technology
69.4K papers, 1.2M citations

93% related

Dalian University of Technology
71.9K papers, 1.1M citations

90% related

Harbin Institute of Technology
109.2K papers, 1.6M citations

89% related

Hunan University
44.1K papers, 863.1K citations

89% related

Soochow University (Suzhou)
56.5K papers, 1M citations

88% related

Performance
Metrics
No. of papers from the Institution in previous years
YearPapers
202371
2022422
20212,466
20202,190
20192,003
20181,605