scispace - formally typeset
Search or ask a question

Showing papers by "Fritz Haber Institute of the Max Planck Society published in 1969"


Journal ArticleDOI
TL;DR: In this article, the field ion microscope was used for measuring the surface free energy anisotropy of tungsten, and a tip with a long shank and a small cone angle was used.

45 citations



Journal ArticleDOI
TL;DR: In this paper, die Winklabhangigkeit der Spektren wurde eingehend, die Licht- und Temperaturabhangig keit kurz untersucht.

16 citations



Journal ArticleDOI
01 Dec 1969
TL;DR: In this paper, NMR-Spektren of bei 80 °C with einem Verstreckgrad von 10,5 verstrecktem linearem Polyathylen, das bis zu 104 min bei 120 °C getempert wurde, sowie von drei weiteren Proben (schmelzkristallisiert, bulk, hochdruckkristalisiert) gemessen.
Abstract: Es wurden die NMR-Spektren von bei 80 °C mit einem Verstreckgrad von 10,5 verstrecktem linearem Polyathylen, das bis zu 104 min bei 120 °C getempert wurde, sowie von drei weiteren Proben (schmelzkristallisiert, bulk, hochdruckkristallisiert) gemessen. Im verstreckten Material treten drei verschieden breite Linien auf. Die breite Komponente ruhrt von Protonen im kristallinen Anteil her, die mittlere wird Protonen in den lateralen Fibrillengrenzen und im nichtkristallinen Bereich zugeschrieben, wahrend die schmale Komponente durch Kettenenden. die nicht in den kristallisierten Teil eingebaut wurden, erklart wird. Im bulk und schmelzkristallisierten Material wird die schmale Komponente, im hochdruckkristallisierten die mittlere Komponente nicht beobachtet. Im verstreckten Material wird bei Temperzeiten zwischen 3 und 5 min der Kristallisationsprozes unterbrochen, die relativen Anteile der drei Komponenten andern sich nicht, das zweite Moment der breiten Linie durchlauft ein Maximum. Anteil und zweites Moment der schmalen Komponente ist unabhangig von der Temperzeit.

14 citations


Journal ArticleDOI
TL;DR: In this paper, Monte Carlo methods have been employed on a high-speed digital computer to generate non-intersecting random chains intended to simulate polymer molecules, and the dependence of the mean-square end-to-end distance on the number of segments has been discussed in terms of two already proposed equations.
Abstract: Monte-Carlo-Methoden wurden benutzt, um mit Hilfe einer Rechenmaschine Zufallsketten zu erzeugen, die als Vorlage fur reale Makromolekule dienen konnen. Dabei wurden zwei gitterfreie Modelle, bei denen entweder Valenz- und Rotationswinkel (A) oder die Rotationswinkel allein (B) frei wahlbar waren, verwendet; die Wirkung des „ausgeschlossnen Volumens” wurde berucksichtigt. Die Abhangigkeit des mittleren Quadrats des Fadenendenabstands von der Segmentzahl wurde an Hand von zwei aus der Literatur bekannten Gleichungen diskutiert. Sie last sich in guter Naherun, durch die Bezichungen h2 = 1,68 n1,203 bzw. h2 = 1,21 n1,248 wiedergeben. Monto Carlo methods have been employed on a high-speed digital computer to generate non-intersecting random chains intended to simulate polymer molecules. For this purpose two nonlattice chain models have been used in which the bond angles and the angles of rotation (A) respectively the angles of rotation only (B) could be randomly chosen. The dependence of the mean-square end-to-end distance on the number of segments has been discussed in terms of two already proposed equations. It is expressed approximately by the equations h2 = 1.68 n1.203 resp. h2 = 1.21 n1.248.

10 citations


Journal ArticleDOI
TL;DR: In this article, a linear voltage sweep polarography of Ag + at stationary silver electrodes has been studied in 1 M HClO 4 supporting electrolyte of varying Ag + -concentrations at 25°.

10 citations


Journal ArticleDOI
01 Sep 1969
TL;DR: Aus den (h00)- und (hh0)-Weitwinkelreflexen von bei 125° C getemperten Bundeln orientierter, aus Losung gezuchteter, Polyathylen-Einkristalle findet man, das diese aus im Durchschnitt 260 A breiten und 830 A langen, von (310)-Seitenflachen begrenzten Mosaikblockchen bestehen as discussed by the authors.
Abstract: Aus den (h00)- und (hh0)-Weitwinkelreflexen von bei 125° C getemperten Bundeln orientierter, aus Losung gezuchteter, Polyathylen-Einkristalle findet man, das diese aus im Durchschnitt 260 A breiten und 830 A langen, von (310)-Seitenflachen begrenzten Mosaikblockchen bestehen. Das zusatzliche Studium der Langperiode mittels Kleinwinkelstreuung zeigt, das sie sich jeweils nach 104 min Temperzeit in allen 3 Dimensionen um jeweils etwa 30% vergrosert haben.

9 citations


Book ChapterDOI
01 Jan 1969

9 citations


Journal ArticleDOI
TL;DR: In this paper, a detailed investigation of several iron tip cleaning procedures is reported and discussed in terms of the physical and chemical properties of this metal, and the most important impurities seem to be carbon, nitrogen, and hydrogen.

8 citations



Journal ArticleDOI
TL;DR: In this paper, 3.4-Diaminostyrene is prepared without byproduct by the reduction of 3-nitro-4-aminostyrerene; it can be condensed to corresponding vinylheterocycles.
Abstract: Bei der Darstellung von 3.4-Diamino-styrol aus 1-[3′.4′-Diamino-phenyl]-athanol sowie aus 3.4-Diamino-zimtsaure entsteht 3.4-Diamino-athyl-benzol als Nebenprodukt. 3.4-Diamino-styrol wird ohne Nebenprodukt durch Reduktion von 3-Nitro-4-amino-styrol erhalten; es last sich zu entsprechenden Vinylheterocyclen kondensieren. The preparation of 3.4-diaminostyrene from 1-(3′.4′-diamino-phenyl)ethanol as well as from 3.4-diamino cinnamic acid is accompanied by the formation of 3.4-diaminoethylbenzene as by-product. 3.4-Diaminostyrene is prepared without by-product by the reduction of 3-nitro-4-aminostyrene; it can be condensed to corresponding vinylheterocycles.

Journal ArticleDOI
TL;DR: In this paper, a new theory was developed for the dependence of the BH-values on the degree of polymerization with a considering conformation and an endgroup effect under the assumption that intermolecular contacts are distributed statistically on the lattice and the polymer molecules are rigid.
Abstract: Fur Die Abhangigkeit des BH-Wertes vom Polymerisationsgrad wurde mit Hilfe des Gittermodells eine neue Theorie aufgestellt, die einen Konformations- und Endgruppeneffekt berucksichtigt. Dabei wird angenommen, das die internmolekularen Kontakte im Gitter statistisch verteilt und die Polymermolekule steif sind. Mit Hilfe enies Computers wurde die Konformation oligomerer Molekule untersucht. Fur alle Konformationen wurde die glelche Auftrittswahrscheinlichkeit vorausgesetzt. Mit Hilfe der Theorie wurde die Abhangigkeit der BH-Werte vorn Polymerisationsgrad fur verschiedene Systeme berechnet. Die Ubereinstimmung mit dem Experiment ist uber einen grosen Bereich des Polymerisationsgrads befriedigend. A new theory was developed for the dependence of the BH-values on the degree of polymerization with a considering conformation and an endgroup effect under the assumption that intermolecular contacts are distributed statistically on the lattice and the polymer molecules are rigid. The conformation of oligomer molecules in a single cubic lattice was studied with computer as being influenced by their endgroups. All Conformations were thereby treated as equally probable. The dependence of the BH-values on the degree of polymerization was calculated in different systems by using this theory. The coincidence with the experiment is very satisfactory over large regions in the degree of polymerization.

Journal ArticleDOI
TL;DR: In this paper, the possibility of binding the metal ions Cu++, Ni++, Co++, Zn++, and Mg++ by poly-(vinylamin) crosslinked with hydrophilic hexa-1.5-dien-3.4-diol was studied in the pH range 3-8 as well as the kinetics of this process.
Abstract: Es wurde das Sorptionsvermogen zweier durch Hexadien-(1.5)-diol-(3.4)-gruppen hydrophil vernetzter Poly(vinylamin)-Harze fur Cu++, Ni++, Co++, Zn++ und Mg++ im pH-Bereich 3–8 gemessen sowie in einigen Fallen die Sorptionsgeschwindigkeit bestimmt. Ausgehend von den Poly(vinylamin)-Harzen erhielt man durch Reaktion mit Alkalisalzen der Chloressigsaure hochkapazitive Chelatharze. Amphotere Ionenaustauscher mit der α-Aminomethylphosphonsaure-Gruppe konneten aus den Poly(vinylamin)-Harzen einerseits mittels Chlormethylphosphonat, andererseits mit Formaldehyd und phosphoriger Saure dargestellt werden. Bei beiden Harztypen wurden das Metallbindungsvermogen sowie die Austauschgeschwindigkeit in Abhangigkeit vom pH untersucht. The possibility of binding the metal ions Cu++, Ni++, Co++, Zn++, and Mg++ by poly-(vinylamin) crosslinked with hydrophilic hexa-1.5-dien-3.4-diol was studied in the pH range 3–8 as well as the kinetics of this process. By condensation of the amin resins with chloroacetate chelating resins with a high capacity were obtained. The introduction of the α-aminomethylphosphonic group into the amin resin by reaction with chloromethylphosphonate or formaldehyde and phosphorous acid resulted in new amphoteric resins. At different pH values for both types of resins the adsorption of transition metal ions and their exchange rate was measured.




Journal ArticleDOI
TL;DR: In this paper, a leicht polymerisierbare 1.4-Diacetoxy-2-vinyl-naphthalin (6) wird dargestellt.
Abstract: Das leicht polymerisierbare 1.4-Diacetoxy-2-vinyl-naphthalin (6) wird dargestellt. Seine Verseifung mit nachfolgender Oxydation ergibt nicht 2-Vinyl-naphthochinon-(1.4), sondern es bilden sich Dimerisierungsprodukte, deren Struktur geklart werden konnte (8–10).

Journal ArticleDOI
TL;DR: Vinyl-[2.5-diacetoxy-phenyl]-sulphone as mentioned in this paper is a polymers in which the redox group (hydroquinone) was attached directly to the polymer chain through a sulphone bridge.
Abstract: Vinyl-[2.5-diacetoxy-phenyl]-sulfon wurde dargestellt. Das Monomere wurde homopolymerisiert und mit Styrol sowie Styrol und Divinylbenzol durch radikalische Initiierung copolymerisiert. Nach Abspaltung der Acetyl-Schutzgruppen resultierten Polymere, in denen die Redoxgruppe (Hydrochinon) uber eine Sulfonbrucke direkt mit der Polymerenkette verbunden ist. Vinyl-[2.5-diacetoxy-phenyl]-sulphone was prepared. The monomer was homopolymerized and copolymerized with styrene and with styrene and divinylbenzene initiated by radicials. After splitting off the acetyl protecting groups we got polymers in which the redox group (hydroquinone) was attached directly to the polymer chain through a sulphone bridge.

Journal ArticleDOI
TL;DR: In this article, periodic bond chains are used for calculation of the surface energies of crystals with β-tin structure, and double units are set up to take into account the interaction between first and between third nearest neighbours.

Journal ArticleDOI
TL;DR: In this article, the infrared luminescence of ZnS(Cu) due to internal transitions within the 3d9 configuration of Cu2+ ions excited by radiation may be modulated by electric ac fields (field modulation).
Abstract: The infrared luminescence of ZnS(Cu) due to internal transitions within the 3d9 configuration of Cu2+ ions excited by radiation may be modulated by electric ac fields (field modulation). The experimental data lead to the conclusion that the modulation of the emission is caused by field-induced density oscillations of free electrons within the ZnS lattice. The infrared Cu2+ emission may also be obtained without exciting radiation by the action of the electric ac field (electroluminescence). The infrared electroluminescence may be stimulated or quenched by additional irradiation. Die durch Strahlung angeregte infrarote Cu-Lumineszenz in ZnS, die von inneren Ubergangen der 3d9-Konfiguration herruhrt, last sich durch elektrische Wechselfelder modulieren (Feldmodulation). Die experimentellen Ergebnisse fuhren zu dem Schlus, das die Modulation der Emission durch Oszillationen der Dichte freier Elektronen im elektrischen Feld verursacht wird. Die infrarote Cu2+-Emission kann ohne Strahlung durch die alleinige Wirkung eines elektrischen Wechselfeldes angeregt werden (Elektrolumineszenz). Die infrarote Elektrolumineszenz last sich durch zusatzliche Bestrahlung verstarken oder abschwachen.

DOI
01 Dec 1969
TL;DR: In this article, the influence of back-diffusion on the kinetics of ammonia synthesis was studied by means of two different arrangements of the catalyst: 1) a long narrow (6 mm O) and 2) a short broad (24 mm O).
Abstract: Der Einflus der Ruckdiffusion des Reaktionsproduktes auf die Kinetik der Ammoniaksynthese wird fur eine enge, lange (6 mm Durchmesser) sowie fur eine weite, flache (24 mm Durchmesser) Katalysatorschuttung untersucht. Es wird gezeigt, das im engen, langen Bett die Ruckdiffusion zu vernachlassigen ist und die kinetischen Messungen mit der entsprechenden integrierten Geschwindigkeitsgleichung auszuwerten sind. Im flachen, weiten Bett dagegen ist unter gewissen Bedingungen die Ruckdiffusion so schnell, das ein fast vollstandiger Konzentrationsausgleich uber den Katalysator stattfindet. Messungen in dieser Anordnung sind am zweckmasigsten wie die in einem gradientlosen Ruckflusreaktor auszuwerten. The influence of back-diffusion is studied in the case of ammonia synthesis by means of two different arrangements of the catalyst: 1) a long narrow (6 mm O) and 2) a short broad (24 mm O) catalyst bed. For arrangement 1) the back-diffusion can be neglected. The kinetics follow the integrated rate equation. At arrangement 2) the back-diffusion may be so fast that there is almost no gradient of concentration along the bed. The kinetics in this case correspond to the ones in a reflux-reactor.