scispace - formally typeset
Search or ask a question
Institution

Huawei

CompanyShenzhen, China
About: Huawei is a company organization based out in Shenzhen, China. It is known for research contribution in the topics: Terminal (electronics) & Signal. The organization has 41417 authors who have published 44698 publications receiving 343496 citations. The organization is also known as: Huawei Technologies & Huawei Technologies Co., Ltd..


Papers
More filters
Journal ArticleDOI
TL;DR: Simulation results demonstrate that the proposed data-gathering algorithm can greatly shorten the moving distance of the collectors compared with the covering line approximation algorithm and is close to the optimal algorithm for small networks.
Abstract: In this paper, we propose a new data-gathering mechanism for large-scale wireless sensor networks by introducing mobility into the network. A mobile data collector, for convenience called an M-collector in this paper, could be a mobile robot or a vehicle equipped with a powerful transceiver and battery, working like a mobile base station and gathering data while moving through the field. An M-collector starts the data-gathering tour periodically from the static data sink, polls each sensor while traversing its transmission range, then directly collects data from the sensor in single-hop communications, and finally transports the data to the static sink. Since data packets are directly gathered without relays and collisions, the lifetime of sensors is expected to be prolonged. In this paper, we mainly focus on the problem of minimizing the length of each data-gathering tour and refer to this as the single-hop data-gathering problem (SHDGP). We first formalize the SHDGP into a mixed-integer program and then present a heuristic tour-planning algorithm for the case where a single M-collector is employed. For the applications with strict distance/time constraints, we consider utilizing multiple M-collectors and propose a data-gathering algorithm where multiple M-collectors traverse through several shorter subtours concurrently to satisfy the distance/time constraints. Our single-hop mobile data-gathering scheme can improve the scalability and balance the energy consumption among sensors. It can be used in both connected and disconnected networks. Simulation results demonstrate that the proposed data-gathering algorithm can greatly shorten the moving distance of the collectors compared with the covering line approximation algorithm and is close to the optimal algorithm for small networks. In addition, the proposed data-gathering scheme can significantly prolong the network lifetime compared with a network with static data sink or a network in which the mobile collector can only move along straight lines.

227 citations

Journal ArticleDOI
TL;DR: By introducing Healthchain, both IoT data and doctor diagnosis cannot be deleted or tampered with so as to avoid medical disputes, and security analysis and experimental results show that the proposed Healthchain is applicable for smart healthcare system.
Abstract: With the dramatically increasing deployment of the Internet of Things (IoT), remote monitoring of health data to achieve intelligent healthcare has received great attention recently. However, due to the limited computing power and storage capacity of IoT devices, users’ health data are generally stored in a centralized third party, such as the hospital database or cloud, and make users lose control of their health data, which can easily result in privacy leakage and single-point bottleneck. In this paper, we propose Healthchain, a large-scale health data privacy preserving scheme based on blockchain technology, where health data are encrypted to conduct fine-grained access control. Specifically, users can effectively revoke or add authorized doctors by leveraging user transactions for key management. Furthermore, by introducing Healthchain, both IoT data and doctor diagnosis cannot be deleted or tampered with so as to avoid medical disputes. Security analysis and experimental results show that the proposed Healthchain is applicable for smart healthcare system.

226 citations

Journal ArticleDOI
TL;DR: This new approach eliminates the system bandwidth constraints of the conventional DPD techniques, and it allows users to arbitrarily choose the bandwidth to be linearized in the PA output according to the system requirement without sacrificing performance, which makes the DPD system design much more flexible and feasible.
Abstract: The continuously increasing demand for wide bandwidth creates great difficulties in employing digital predistortion (DPD) for radio frequency (RF) power amplifiers (PAs) in future ultra-wideband systems because the existing DPD system requires multiple times the input signal bandwidth in the transmitter and receiver chain, which is sometimes almost impossible to implement in practice. In this paper, we present a novel band-limited digital predistortion technique in which a band-limiting function is inserted into the general Volterra operators in the DPD model to control the signal bandwidth under modeling, which logically transforms the general Volterra series-based model into a band-limited version. This new approach eliminates the system bandwidth constraints of the conventional DPD techniques, and it allows users to arbitrarily choose the bandwidth to be linearized in the PA output according to the system requirement without sacrificing performance, which makes the DPD system design much more flexible and feasible. In order to validate this idea, a high-power LDMOS Doherty PA excited by various wideband signals, including 100-MHz long-term evolution advanced signals, was tested. Experimental results showed that excellent linearization performance can be obtained by employing the proposed approach. Furthermore, this technique can be applied to other linear-in-parameter models. In future ultra-wideband systems, this new technique can significantly improve system performance and reduce DPD implementation cost.

226 citations

Proceedings ArticleDOI
01 May 2017
TL;DR: This paper focuses on the design of three key network slicing building blocks responsible for traffic analysis and prediction per network slice, admission control decisions for network slice requests, and adaptive correction of the forecasted load based on measured deviations.
Abstract: The emerging network slicing paradigm for 5G provides new business opportunities by enabling multi-tenancy support. At the same time, new technical challenges are introduced, as novel resource allocation algorithms are required to accommodate different business models. In particular, infrastructure providers need to implement radically new admission control policies to decide on network slices requests depending on their Service Level Agreements (SLA). When implementing such admission control policies, infrastructure providers may apply forecasting techniques in order to adjust the allocated slice resources so as to optimize the network utilization while meeting network slices' SLAs. This paper focuses on the design of three key network slicing building blocks responsible for (i) traffic analysis and prediction per network slice, (ii) admission control decisions for network slice requests, and (iii) adaptive correction of the forecasted load based on measured deviations. Our results show very substantial potential gains in terms of system utilization as well as a trade-off between conservative forecasting configurations versus more aggressive ones (higher gains, SLA risk).

225 citations

Posted Content
TL;DR: In this paper, an uplink contention-based sparse code multiple access (SCMA) design is proposed as a solution for 5G networks, which can provide low signaling overhead, low delay, and support of massive connectivity.
Abstract: Fifth generation (5G) wireless networks are expected to support very diverse applications and terminals. Massive connectivity with a large number of devices is an important requirement for 5G networks. Current LTE system is not able to efficiently support massive connectivity, especially on the uplink (UL). Among the issues arise due to massive connectivity is the cost of signaling overhead and latency. In this paper, an uplink contention-based sparse code multiple access (SCMA) design is proposed as a solution. First, the system design aspects of the proposed multiple-access scheme are described. The SCMA parameters can be adjusted to provide different levels of overloading, thus suitable to meet the diverse traffic connectivity requirements. In addition, the system-level evaluations of a small packet application scenario are provided for contention-based UL SCMA. SCMA is compared to OFDMA in terms of connectivity and drop rate under a tight latency requirement. The simulation results demonstrate that contention-based SCMA can provide around 2.8 times gain over contention-based OFDMA in terms of supported active users. The uplink contention-based SCMA scheme can be a promising technology for 5G wireless networks for data transmission with low signaling overhead, low delay, and support of massive connectivity.

224 citations


Authors

Showing all 41483 results

NameH-indexPapersCitations
Yu Huang136149289209
Xiaoou Tang13255394555
Xiaogang Wang12845273740
Shaobin Wang12687252463
Qiang Yang112111771540
Wei Lu111197361911
Xuemin Shen106122144959
Li Chen105173255996
Lajos Hanzo101204054380
Luca Benini101145347862
Lei Liu98204151163
Tao Wang97272055280
Mohamed-Slim Alouini96178862290
Qi Tian96103041010
Merouane Debbah9665241140
Network Information
Related Institutions (5)
Alcatel-Lucent
53.3K papers, 1.4M citations

90% related

Bell Labs
59.8K papers, 3.1M citations

88% related

Hewlett-Packard
59.8K papers, 1.4M citations

87% related

Microsoft
86.9K papers, 4.1M citations

87% related

Intel
68.8K papers, 1.6M citations

87% related

Performance
Metrics
No. of papers from the Institution in previous years
YearPapers
202319
202266
20212,069
20203,277
20194,570
20184,476