Indian Institute of Technology Kharagpur

About: Indian Institute of Technology Kharagpur is a education organization based out in Kharagpur, India. It is known for research contribution in the topics: Natural rubber & Dielectric. The organization has 16887 authors who have published 38658 publications receiving 714526 citations.

Preparation and properties of styrene–butadiene rubber based nanocomposites: The influence of the structural and processing parameters

Abstract: Rubber-based nanocomposites were prepared with octadecyl amine modified sodium montmorillonite clay and styrene–butadiene rubber with different styrene contents (15, 23, and 40%). The solvent used to prepare the nanocomposites, the cure conditions, and the cure system were also varied to determine their effect on the properties of the nanocomposites. All the composites were characterized with X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM). The XRD studies revealed exfoliation for the modified clay–rubber composites. The TEM photomicrographs showed a uniform distribution of the modified clay in the rubber matrix. The thickness of the particles in the exfoliated composites was around 10–15 nm. Although the FTIR study of the unmodified and modified clays showed extra peaks due to the intercalation of the amine chains into the gallery, the spectra for the rubber–clay nanocomposites were almost the same because of the presence of a very small amount of clay in the rubber matrix. All the modified clay–rubber nanocomposites displayed improved mechanical strength. The styrene content of the rubber had a pronounced effect on the properties of the nanocomposites. With increasing styrene content, the improvement in the properties was greater. Dicumyl peroxide and sulfur cure systems displayed similar strength, but higher elongation and slightly lower modulus values were obtained with the sulfur cure system. The curing of the samples at four different durations at 160°C showed that the cure time affected the properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 698–709, 2004

Secured Flipped Scan-Chain Model for Crypto-Architecture

Abstract: Scan chains are exploited to develop attacks on cryptographic hardware and steal intellectual properties from the chip. This paper proposes a secured strategy to test designs by inserting a certain number of inverters between randomly selected scan cells. The security of the scheme has been analyzed. Two detailed case studies of RC4 stream cipher and AES block cipher have been presented to show that the proposed strategy prevents existing scan-based attacks in the literature. The elegance of the scheme lies in its less hardware overhead.

Self-assembly of silver nanoparticles : Synthesis, stabilization, optical properties, and application in surface-enhanced raman scattering

Abstract: Silver nanoparticle aggregates were synthesized in large scale using resorcinol under alkaline condition to obtain an assembly of silver clusters. Stable dispersion of the cluster in aqueous medium has been examined out of resorcinol-capped silver nanoparticle assemblies. The UV-vis spectroscopy during the particle evolution has been studied in detail. From the high-resolution TEM (HRTEM) image and XRD pattern it was confirmed that the particles are made of pure silver only. The capping action of resorcinol has been authenticated from the FTIR spectra. UV-vis spectroscopy and TEM images reveal that the temperature, effect of vibrational energy, heat shock, and time-dependent particle evolution have unique bearing on the stability and surface properties of the clusters. The concentrations of silver nitrate, resorcinol, and NaOH have important influence on the particle evolution and its size. TEM images incite us to examine the aggregates to capitulate surface-enhanced Raman scattering (SERS) to the single molecular level using crystal violet (CV) and cresyl fast violet (CFV) as molecular probes. The SERS intensity of CV increases with increasing the size of the silver aggregate.

Biomaterials in cardiovascular research: applications and clinical implications.

Abstract: Cardiovascular biomaterials (CB) dominate the category of biomaterials based on the demand and investments in this field. This review article classifies the CB into three major classes, namely, metals, polymers, and biological materials and collates the information about the CB. Blood compatibility is one of the major criteria which limit the use of biomaterials for cardiovascular application. Several key players are associated with blood compatibility and they are discussed in this paper. To enhance the compatibility of the CB, several surface modification strategies were in use currently. Some recent applications of surface modification technology on the materials for cardiovascular devices were also discussed for better understanding. Finally, the current trend of the CB, endothelization of the cardiac implants and utilization of induced human pluripotent stem cells (ihPSCs), is also presented in this review. The field of CB is growing constantly and many new investigators and researchers are developing interest in this domain. This review will serve as a one stop arrangement to quickly grasp the basic research in the field of CB.