IPG Photonics

About: IPG Photonics is a based out in . It is known for research contribution in the topics: Laser & Fiber laser. The organization has 903 authors who have published 1241 publications receiving 63339 citations.

Sun-Earth System Interaction studies over Vietnam: an international cooperative project

Abstract: During many past decades, scientists from various countries have studied separately the atmospheric motions in the lower atmosphere, in the Earth's magnetic field, in the magnetospheric currents, etc. All of these separate studies lead today to the global study of the Sun and Earth connections, and as a consequence, new scientific programs (IHY- International Heliophysical Year, CAWSES- Climate and Weather in the Sun-Earth System) are defined, in order to assume this new challenge. In the past, many scientists did not have the possibility to collect data at the same time in the various latitude and longitude sectors. Now, with the progress of geophysical sciences in many developing countries, it is possible to have access to worldwide data sets. This paper presents the particularities of geophysical parameters measured by the Vietnamese instrument networks. It introduces a cooperative Vietnamese-IGRGEA (International Geophysical Research Group Europe Africa) project, and presents, for the first time, to the international community, the geophysical context of Vietnam. Concerning the ionosphere: since 1963, during four solar cycles, the ionosonde at Phu Thuy (North Vietnam) was operating. The Phu Thuy data exhibits the common features for the ionospheric parameters, previously observed in other longitude and latitude sectors. The critical frequencies of the E, F1 and F2 ionospheric layers follow the variation of the sunspot cycle. F2 and E critical frequencies also exhibit an annual variation. The first maps of TEC made with data from GPS receivers recently installed in Vietnam illustrate the regional equatorial pattern, i.e. two maxima of electronic density at 15 N and 15 S from the magnetic equator and a trough of density at the magnetic equator. These features illustrate the equatorial fountain effect. Concerning the Earth's magnetic field: a strong amplitude of the equatorial electrojet was first observed by the CHAMP satellite at the height of 400 km in the Vietnamese longitude sector. In this paper we compare the ground magnetic observations of the Indian and Vietnamese magnetometer networks. This comparison highlights the regional structure of the amplitude of the equatorial electrojet, which is stronger in Vietnam than in India. Concerning the monsoon: Vietnam exhibits a strong monsoon and has mainly one rainy season peaking in August, hence associated with the southwest monsoon flow. But some monsoon variability from one place to another is related to the orography. In the mountainous northern regions of Vietnam, there is an "early" monsoon peaking in July. In the coastal regions between 12 N and 19 N the monsoon season is centered on October. Concerning lightning: Vietnam is a country of strong atmospheric storms with some areas of very intense lightning in North Vietnam (22,5 N, 105 E) and in South Vietnam (11 N, 107 E). In North Vietnam strong lightning is associated with the most intense rainy region. Keywords. Ionosphere (Electric fields and currents) - Meteorology and dynamics (Tropical meteorology) - Geomagnetism and paleomagnetism (Time variations, diurnal to secular)

Portable laser head

Abstract: A portable laser head has a single-piece holder configured with a plurality of spaced-apart nests. The nests are arranged to receive at least a non-linear frequency converter, a V-shaped beam splitter and a dump collimator. Alternatively, the holder has multiple nests configured to receive an input collimator and output focusing optics unit in addition to the non-linear frequency converter, V-shaped beam splitter and dump collimator. The holder is characterized by small dimensions allowing for self-alignment of the above-referred components.

Optimization of a novel Tm fiber laser lithotripter in terms of stone ablation efficiency and retropulsion reduction

Abstract: Recently, a Thulium (Tm) fiber laser operating at a wavelength of 1940 nm and peak power up to 500 W has been introduced as a promising energy source for laser lithotripsy. Direct comparative studies have demonstrated considerable advantages of Tm fiber laser over the current industry-standard 2100 nm Holmium:YAG (Ho:YAG) device in terms of ablation rate and retropulsion effects. In this work, we investigated avenues of further improving stone ablation efficiency and reducing retropulsion. Specifically, the roles of temporal pulse structure and fiber tip preparation were studied in detail. Experiments were conducted on Bego stone phantoms in an aqueous environment using a computerized 2D stage for controlled scanning of the fiber over the stone surface. High-resolution 3D-enabled optical microscopy was employed to assess both fiber tip damage and stone ablation rate. Retropulsion effects were quantified using a high-speed video camera. Fiber burn back was evaluated as well. Fiber performance could be preserved during prolonged (up to 15 min) procedures when the fiber tip was adequately prepared. Furthermore, the results were compared with available literature for similar experiments performed with the Ho:YAG laser. The data obtained provide an important foundation for optimizing clinical performance of Tm fiber systems for lithotripsy.

Fiber laser with large mode area fiber

Abstract: A single-mode fiber laser includes a single mode holding, large mode area optical fiber assembly having a large mode area core, a first cladding and a second cladding. The optical fiber assembly has several unique sections including a gain section having a ytterbium-doped core, first and second reflective sections including fiber Bragg gratings that define a lasing cavity, and an absorptive section also having a ytterbium-doped core, the absorptive section having an output end coupled to an input end of said first reflective section. A broad area, multi-mode diode pump source is configured to pump multi-mode light into a tapered input section and cladding-pump the gain section. The gain section absorbs the multi-mode pump light and emits single-mode light. The absorptive section absorbs emissions at the operating wavelength and prevents operating emissions from reflecting back into said pump source.