Jožef Stefan Institute

About: Jožef Stefan Institute is a facility organization based out in Ljubljana, Slovenia. It is known for research contribution in the topics: Liquid crystal & Dielectric. The organization has 3828 authors who have published 12614 publications receiving 291025 citations.

Influence of contamination on resin bond strength to nano‐structured alumina‐coated zirconia ceramic

Abstract: The purpose of this study was to evaluate the influence of contamination and subsequent cleaning on the bond strength and durability of an adhesive resin to nano-structured alumina-coated zirconia ceramic. Zirconia ceramic disks were coated with nano-structured alumina, utilizing the hydrolysis of aluminum nitride powder. After immersion in saliva or the use of a silicone disclosing agent, specimens were cleaned with phosphoric acid etching or with tap water rinsing only. Uncontaminated specimens served as controls. Plexiglas tubes filled with composite resin were bonded with a phosphate monomer [10-methacryloxydecyl-dihydrogenphosphate (MDP)]-containing resin (Panavia 21). Subgroups of eight specimens each were stored in distilled water at 37 degrees C, either for 3 d without thermal cycling (TC) or for 150 d with 37,500 thermal cycles from 5 to 55 degrees C. The tensile bond strength (TBS) was determined using a universal testing machine at a crosshead speed of 2 mm min(-1). The topography of the debonded surface was scrutinized for fractographic features, utilizing both optical and scanning electron microscopy. The TBS to uncontaminated nano-structured alumina-coated zirconia ceramic was durable, while contamination significantly reduced the TBS. Phosphoric acid cleaning was effective in removal of saliva contamination from the coated bonding surface but was not effective in removal of the silicone disclosing agent. Nano-structured alumina coating improves resin bonding to zirconia ceramic and eliminates the need for air-abrasion before bonding.

Plasma under control: Advanced solutions and perspectives for plasma flux management in material treatment and nanosynthesis

Abstract: Given the vast number of strategies used to control the behavior of laboratory and industrially relevant plasmas for material processing and other state-of-the-art applications, a potential user may find themselves overwhelmed with the diversity of physical configurations used to generate and control plasmas. Apparently, a need for clearly defined, physics-based classification of the presently available spectrum of plasma technologies is pressing, and the critically summary of the individual advantages, unique benefits, and challenges against key application criteria is a vital prerequisite for the further progress. To facilitate selection of the technological solutions that provide the best match to the needs of the end user, this work systematically explores plasma setups, focusing on the most significant family of the processes—control of plasma fluxes—which determine the distribution and delivery of mass and energy to the surfaces of materials being processed and synthesized. A novel classification based on the incorporation of substrates into plasma-generating circuitry is also proposed and illustrated by its application to a wide variety of plasma reactors, where the effect of substrate incorporation on the plasma fluxes is emphasized. With the key process and material parameters, such as growth and modification rates, phase transitions, crystallinity, density of lattice defects, and others being linked to plasma and energy fluxes, this review offers direction to physicists, engineers, and materials scientists engaged in the design and development of instrumentation for plasma processing and diagnostics, where the selection of the correct tools is critical for the advancement of emerging and high-performance applications.

Effect of body temperature on cold induced vasodilation.

Abstract: Cold-induced vasodilation (CIVD) is an acute increase in peripheral blood flow observed during cold exposures. It is hypothesized to protect against cold injuries, yet despite continuous research it remains an unexplained phenomenon. Contrary to the traditionally held view, we propose that CIVD is a thermoregulatory reflex mechanism contributing to heat loss. Ten adults (4 females; 23.8 ± 2.0 years) randomly underwent three 130-min exposures to −20°C incorporating a 10-min moderate exercise period at the 65th min, while wearing a liquid conditioning garment (LCG) and military arctic clothing. In the pre-warming condition, rectal temperature was increased by 0.5°C via the LCG before the cold exposure. In the warming condition, participants regulated the LCG throughout the cold exposure to subjective comfort. In the control condition, the LCG was worn but was not operated either before or during the cold exposure. Results demonstrated that the majority of CIVD occurred during the warming condition when the thermometrically-estimated mean body temperature (Tb) was at its highest. A thermoregulatory pattern was identified whereby CIVD occurred soon after Tb increased past a threshold (~36.65°C in warming and pre-warming; ~36.4°C in control). When CIVD occurred, Tb was reduced and CIVD ceased when Tb fell below the threshold. These findings were independent of extremity temperature since CIVD episodes occurred at a large range of finger temperatures (7.2–33.5°C). These observations were statistically confirmed by auto-regressive integrated moving average analysis (t = 9.602, P < 0.001). We conclude that CIVD is triggered by increased Tb supporting the hypothesis that CIVD is a thermoregulatory mechanism contributing to heat loss.

Towards large-scale in free-standing graphene and N-graphene sheets

Abstract: One of the greatest challenges in the commercialization of graphene and derivatives is production of high quality material in bulk quantities at low price and in a reproducible manner. The very limited control, or even lack of, over the synthesis process is one of the main problems of conventional approaches. Herein, we present a microwave plasma-enabled scalable route for continuous, large-scale fabrication of free-standing graphene and nitrogen doped graphene sheets. The method’s crucial advantage relies on harnessing unique plasma mechanisms to control the material and energy fluxes of the main building units at the atomic scale. By tailoring the high energy density plasma environment and complementarily applying in situ IR and soft UV radiation, a controllable selective synthesis of high quality graphene sheets at 2 mg/min yield with prescribed structural qualities was achieved. Raman spectroscopy, scanning electron microscopy, high resolution transmission electron microscopy, X-ray photoelectron spectroscopy and Near Edge X-ray-absorption fine-structure spectroscopy were used to probe the morphological, chemical and microstructural features of the produced material. The method described here is scalable and show a potential for controllable, large-scale fabrication of other graphene derivatives and promotes microwave plasmas as a competitive, green, and cost-effective alternative to presently used chemical methods.