Institution
King Abdullah University of Science and Technology
Education•Jeddah, Saudi Arabia•
About: King Abdullah University of Science and Technology is a education organization based out in Jeddah, Saudi Arabia. It is known for research contribution in the topics: Catalysis & Membrane. The organization has 6221 authors who have published 22019 publications receiving 625706 citations. The organization is also known as: KAUST.
Topics: Catalysis, Membrane, Computer science, Fading, Population
Papers published on a yearly basis
Papers
More filters
••
TL;DR: Efficient incorporation of engineered submicrometre-sized metal–organic framework (MOF) crystals into polymers to form hybrid materials that successfully translate the excellent molecular sieving properties of face-centred cubic (fcu)-MOFs into the resultant membranes are reported on.
Abstract: Membrane-based separations can improve energy efficiency and reduce the environmental impacts associated with traditional approaches. Nevertheless, many challenges must be overcome to design membranes that can replace conventional gas separation processes. Here, we report on the incorporation of engineered submicrometre-sized metal–organic framework (MOF) crystals into polymers to form hybrid materials that successfully translate the excellent molecular sieving properties of face-centred cubic (fcu)-MOFs into the resultant membranes. We demonstrate, simultaneously, exceptionally enhanced separation performance in hybrid membranes for two challenging and economically important applications: the removal of CO2 and H2S from natural gas and the separation of butane isomers. Notably, the membrane molecular sieving properties demonstrate that the deliberately regulated and contracted MOF pore-aperture size can discriminate between molecular pairs. The improved performance results from precise control of the linkers delimiting the triangular window, which is the sole entrance to the fcu-MOF pore. This rational-design hybrid approach provides a general toolbox for enhancing the transport properties of advanced membranes bearing molecular sieve fillers with sub-nanometre-sized pore-apertures. Sub-micrometre MOF particles are incorporated into polymers to form mixed matrix membranes. Molecular sieving enables performance far beyond current limits for two applications, butane isomer separation and combined CO2/H2S removal from natural gas.
395 citations
••
TL;DR: AramcoMech 3.0 has been developed to describe the combustion of 1,3-butadiene and is validated by a comparison of simulation results to the new experimental measurements.
395 citations
••
TL;DR: As a proof-of-concept application, the obtained ultrathin COF NSs are used as a novel fluorescence sensing platform for the highly sensitive and selective detection of DNA.
Abstract: The ability to prepare ultrathin two-dimensional (2D) covalent organic framework (COF) nanosheets (NSs) in high yield is of great importance for the further exploration of their unique properties and potential applications Herein, by elaborately designing and choosing two flexible molecules with C3v molecular symmetry as building units, a novel imine-linked COF, namely, TPA-COF, with a hexagonal layered structure and sheet-like morphology, is synthesized Since the flexible building units are integrated into the COF skeletons, the interlayer stacking becomes weak, resulting in the easy exfoliation of TPA-COF into ultrathin 2D NSs Impressively, for the first time, the detailed structural information, ie, the pore channels and individual building units in the NSs, is clearly visualized by using the recently developed low-dose imaging technique of transmission electron microscopy (TEM) As a proof-of-concept application, the obtained ultrathin COF NSs are used as a novel fluorescence sensing platform for
394 citations
••
TL;DR: The focus is on the origin of the various voltage-limiting mechanisms in PSCs, and the effect of such methods on the reduction of hysteresis are described.
Abstract: Metal-halide perovskites are rapidly emerging as an important class of photovoltaic absorbers that may enable high-performance solar cells at affordable cost. Thanks to the appealing optoelectronic properties of these materials, tremendous progress has been reported in the last few years in terms of power conversion efficiencies (PCE) of perovskite solar cells (PSCs), now with record values in excess of 24%. Nevertheless, the crystalline lattice of perovskites often includes defects, such as interstitials, vacancies, and impurities; at the grain boundaries and surfaces, dangling bonds can also be present, which all contribute to nonradiative recombination of photo-carriers. On device level, such recombination undesirably inflates the open-circuit voltage deficit, acting thus as a significant roadblock toward the theoretical efficiency limit of 30%. Herein, the focus is on the origin of the various voltage-limiting mechanisms in PSCs, and possible mitigation strategies are discussed. Contact passivation schemes and the effect of such methods on the reduction of hysteresis are described. Furthermore, several strategies that demonstrate how passivating contacts can increase the stability of PSCs are elucidated. Finally, the remaining key challenges in contact design are prioritized and an outlook on how passivating contacts will contribute to further the progress toward market readiness of high-efficiency PSCs is presented.
393 citations
••
TL;DR: Trends in the biomedical applications of silica and organosilica nanovectors are delineated, such as unconventional bioimaging techniques, large cargo delivery, combination therapy, gaseous molecule delivery, antimicrobial protection, and Alzheimer's disease therapy.
Abstract: Predetermining the physico-chemical properties, biosafety, and stimuli-responsiveness of nanomaterials in biological environments is essential for safe and effective biomedical applications. At the forefront of biomedical research, mesoporous silica nanoparticles and mesoporous organosilica nanoparticles are increasingly investigated to predict their biological outcome by materials design. In this review, it is first chronicled that how the nanomaterial design of pure silica, partially hybridized organosilica, and fully hybridized organosilica (periodic mesoporous organosilicas) governs not only the physico-chemical properties but also the biosafety of the nanoparticles. The impact of the hybridization on the biocompatibility, protein corona, biodistribution, biodegradability, and clearance of the silica-based particles is described. Then, the influence of the surface engineering, the framework hybridization, as well as the morphology of the particles, on the ability to load and controllably deliver drugs under internal biological stimuli (e.g., pH, redox, enzymes) and external noninvasive stimuli (e.g., light, magnetic, ultrasound) are presented. To conclude, trends in the biomedical applications of silica and organosilica nanovectors are delineated, such as unconventional bioimaging techniques, large cargo delivery, combination therapy, gaseous molecule delivery, antimicrobial protection, and Alzheimer's disease therapy.
393 citations
Authors
Showing all 6430 results
Name | H-index | Papers | Citations |
---|---|---|---|
Jian-Kang Zhu | 161 | 550 | 105551 |
Jean M. J. Fréchet | 154 | 726 | 90295 |
Kevin Murphy | 146 | 728 | 120475 |
Jean-Luc Brédas | 134 | 1026 | 85803 |
Carlos M. Duarte | 132 | 1173 | 86672 |
Kazunari Domen | 130 | 908 | 77964 |
Jian Zhou | 128 | 3007 | 91402 |
Tai-Shung Chung | 119 | 879 | 54067 |
Donal D. C. Bradley | 115 | 652 | 65837 |
Lain-Jong Li | 113 | 627 | 58035 |
Hong Wang | 110 | 1633 | 51811 |
Peng Wang | 108 | 1672 | 54529 |
Juan Bisquert | 107 | 450 | 46267 |
Jian Zhang | 107 | 3064 | 69715 |
Karl Leo | 104 | 832 | 42575 |