scispace - formally typeset
Search or ask a question
Institution

Mitsubishi Electric

CompanyRatingen, Germany
About: Mitsubishi Electric is a company organization based out in Ratingen, Germany. It is known for research contribution in the topics: Signal & Voltage. The organization has 23024 authors who have published 27591 publications receiving 255671 citations. The organization is also known as: Mitsubishi Electric Corporation & Mitsubishi Denki K.K..


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors describe the development of a bilateral dc/dc converter rated at 1500 V with a peak power of 500 kW for battery energy storage systems supporting railway dc feeder systems.
Abstract: This paper describes the development of a bilateral dc/dc converter rated at 1500 V with a peak power of 500 kW for battery energy storage systems supporting railway dc feeder systems. The dc/dc converter converts regenerated power from a braking train and charges the batteries. The dc/dc converter discharges the stored energy to feed the train during powering. The converter main circuit and the control system are described, and successful test results obtained at the factory are reported. For the main circuit test, a special test method was applied. For the control system test, a real-time digital simulator was used for hardware-in-loop tests. In addition to the converter tests, the results from dc feeder system tests with an actual rectifier and battery bank are also presented.

51 citations

Patent
28 Sep 2006
TL;DR: In this article, an image recognition device is configured so that a scanning pattern recording unit that records a plurality of scanning patterns for directing how to scan recognition areas of predetermined size in the image data is included.
Abstract: In order to reduce the computational burden required for scanning and to enhance the recognition accuracy, an image recognition device is configured so that a scanning pattern recording unit that records a plurality of scanning patterns for directing how to scan recognition areas of predetermined size in the image data is included, and different scanning patterns for successive frames are read out from the scanning pattern recording unit and applied to scan the recognition areas.

51 citations

Journal ArticleDOI
09 Jun 2017
TL;DR: The CV-QKD system utilises a four-state and post-selection protocol and generates a secure key against the entangling cloner attack, and uses a non-binary LDPC code for error correction and the Toeplitz matrix multiplication for privacy amplification.
Abstract: We have developed a continuous-variable quantum key distribution (CV-QKD) system that employs discrete quadrature-amplitude modulation and homodyne detection of coherent states of light. We experimentally demonstrated automated secure key generation with a rate of 50 kbps when a quantum channel is a 10 km optical fibre. The CV-QKD system utilises a four-state and post-selection protocol and generates a secure key against the entangling cloner attack. We used a pulsed light source of 1550 nm wavelength with a repetition rate of 10 MHz. A commercially available balanced receiver is used to realise shot-noise-limited pulsed homodyne detection. We used a non-binary LDPC code for error correction (reverse reconciliation) and the Toeplitz matrix multiplication for privacy amplification. A graphical processing unit card is used to accelerate the software-based post-processing.

51 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe a simulation method for WEDM (Wire Electrical Discharge Machining) which can accurately reproduce the discharge phenomena of WEDMs on computer, the simulation process consists of searching for discharge locations, removing the workpiece and analyzing wire vibration.

51 citations

Patent
24 Feb 2011
TL;DR: In this paper, a traveling route estimating unit 1 for estimating a route along which a moving object will travel and which falls within a predetermined region from a current position, a first recommended speed arithmetic unit 10 for computing a recommended speed in each of road sections on the route estimated by the traveling route estimated unit 1 on the basis of road state information showing a road state.
Abstract: Disclosed is a navigation device including a traveling route estimating unit 1 for estimating a route along which a moving object will travel and which falls within a predetermined region from a current position, a first recommended speed arithmetic unit 10 for computing a recommended speed in each of road sections on the route estimated by the traveling route estimating unit 1 on the basis of road state information showing a road state, and a second recommended speed arithmetic unit 20 for computing a recommended speed in a road section between the road sections for each of which the recommended speed is computed by the first recommended speed arithmetic unit 10 according to a predetermined speed variation function.

51 citations


Authors

Showing all 23025 results

NameH-indexPapersCitations
Ron Kikinis12668463398
William T. Freeman11343269007
Takashi Saito112104152937
Andreas F. Molisch9677747530
Markus Gross9158832881
Michael Wooldridge8754350675
Ramesh Raskar8667030675
Dan Roth8552328166
Joseph Katz8169127793
James S. Harris80115228467
Michael Mitzenmacher7942236300
Hanspeter Pfister7946623935
Dustin Anderson7860728052
Takashi Hashimoto7398324644
Masaaki Tanaka7186022443
Network Information
Related Institutions (5)
Hitachi
101.4K papers, 1.4M citations

94% related

Toshiba
83.6K papers, 1M citations

93% related

Fujitsu
75K papers, 827.5K citations

92% related

NEC
57.6K papers, 835.9K citations

92% related

Nippon Telegraph and Telephone
22.3K papers, 430.4K citations

90% related

Performance
Metrics
No. of papers from the Institution in previous years
YearPapers
20224
2021327
20201,060
20191,605
20181,517
20171,090