Institution
Mitsubishi Electric
Company•Ratingen, Germany•
About: Mitsubishi Electric is a company organization based out in Ratingen, Germany. It is known for research contribution in the topics: Signal & Voltage. The organization has 23024 authors who have published 27591 publications receiving 255671 citations. The organization is also known as: Mitsubishi Electric Corporation & Mitsubishi Denki K.K..
Topics: Signal, Voltage, Layer (electronics), Heat exchanger, Laser
Papers published on a yearly basis
Papers
More filters
••
01 Nov 1986TL;DR: In this paper, it was shown that the insulating oil and the surface of the solid materials become charged and dielectric breakdown is possible within the oil or at the interface of insulating materials.
Abstract: Streaming electrification in transformers occurs at the interface between the insulating oil and the insulating material as the oil circulates in the transformer. As a result, the insulating oil and the surface of the solid materials become charged and dielectric breakdown is possible within the oil or at the interface of insulating materials.
81 citations
••
TL;DR: In this paper, a reoxidation process was used to improve the ON-resistance of SiC-MOSFETs with a threshold voltage of 2.9 m at 150 °C.
Abstract: SiC-MOSFETs provide superior performance for next generation power electronics systems. High threshold voltage 600 V SiC-MOSFETs were realized utilizing a reoxidation process, which drastically improves a tradeoff between an ON-resistance and a threshold voltage. Low-loss SiC-MOSFETs with a 1200 V/100-A rating have been developed. Using the developed SiC-MOSFETs, 1200 V/800-A high-power full SiC module with an ON-resistance as low as 2.9 m $\Omega $ at 150 °C was successfully fabricated. The high-power module markedly reduces power loss especially at high carrier frequency. Large-area 3300 V SiC-MOSFETs with an ON-resistance of 52 m $\Omega $ at 175 °C exhibit an adequate reverse bias safe operating area and 3300 V SiC-MOSFETs screened by applying a body diode current stress show stable characteristics under a continuous current through their body diode for 1000 h.
81 citations
••
TL;DR: The change of moisture distribution in a grain of rice during boiling was observed using the nuclear magnetic resonance (NMR) transverse relaxation time (T2) imaging method and the factors which governed the cooking process were examined as discussed by the authors.
81 citations
•
13 Dec 2001TL;DR: In this paper, a direction regulator H of display, comprising a frame M mounting a member 7 capable of elevating/lowering in the height direction X 1, is provided.
Abstract: A direction regulator H of display, comprising a frame M mounting a member 7 capable of elevating/lowering in the height direction X1. A display fixing part 1 is provided to an upper part of the elevating/lowering member 7. The display fixing part 1 comprises a base member 2 having a spherical receiving face 27A. In front of the base member 2, a cap support 3 comprising a spherical cap body 31 having a curvature substantially identical to that of the receiving face 27A is provided to be urged by a spring 9 through the receiving face 27A of the base member 2. A flange 4 is clamped between the base member 2 and the cap support 3. The flange 4 is slidable along the spherical receiving face 27A of the base member 2. The flange 4 is fixed with a display D through an angle regulating member 5.
81 citations
••
23 May 2005TL;DR: In this article, a pre-pump pulse in front of a standard laser pulse is introduced to solve the measurement setting change problem, and a quantitative analysis of strain measurement accuracy is also presented.
Abstract: The distributed Brillouin scattering technique, using pulse width of 1ns, that is, one order of magnitude smaller than currently available in commercial applications of BOTDA, was successfully implemented and examined in laboratory environment by Bao et al. However, the two main problems prohibits its commercial use, namely, the measurement setting must be modified each time the measurements object is changed, and, furthermore, long-range measurements cannot be effectively carried out due to substantial increase in signal noise level with the measurement distance. This paper presents a new technique, which overcomes both of these problems, by introducing the pre-pump pulse in front of standard laser pulse. Theoretical analysis clearly demonstrates that the cm-order distributed sensing, independent of the fiber length, can be realized. Moreover, a quantitative analysis of strain measurement accuracy is also presented.
80 citations
Authors
Showing all 23025 results
Name | H-index | Papers | Citations |
---|---|---|---|
Ron Kikinis | 126 | 684 | 63398 |
William T. Freeman | 113 | 432 | 69007 |
Takashi Saito | 112 | 1041 | 52937 |
Andreas F. Molisch | 96 | 777 | 47530 |
Markus Gross | 91 | 588 | 32881 |
Michael Wooldridge | 87 | 543 | 50675 |
Ramesh Raskar | 86 | 670 | 30675 |
Dan Roth | 85 | 523 | 28166 |
Joseph Katz | 81 | 691 | 27793 |
James S. Harris | 80 | 1152 | 28467 |
Michael Mitzenmacher | 79 | 422 | 36300 |
Hanspeter Pfister | 79 | 466 | 23935 |
Dustin Anderson | 78 | 607 | 28052 |
Takashi Hashimoto | 73 | 983 | 24644 |
Masaaki Tanaka | 71 | 860 | 22443 |