Institution
Motilal Nehru National Institute of Technology Allahabad
Education•Allahabad, Uttar Pradesh, India•
About: Motilal Nehru National Institute of Technology Allahabad is a education organization based out in Allahabad, Uttar Pradesh, India. It is known for research contribution in the topics: Control theory & Electric power system. The organization has 2475 authors who have published 5067 publications receiving 61891 citations. The organization is also known as: NIT Allahabad & Motilal Nehru Regional Engineering College.
Papers published on a yearly basis
Papers
More filters
••
01 Feb 2020TL;DR: Experimental results show that VBO gives better performance than teacher learning‐based optimization (TLBO), PSO, and Jaya algorithms for the popular topologies that are publicly available.
Abstract: Software‐defined networking (SDN) is one of the most used network architecture that divides the forwarding plane and control plane. The SDN centrally observes and regulates the network thr...
37 citations
••
16 Aug 2004TL;DR: It has been found that eight of nine Weyuker properties have been satisfied by the cognitive weight software complexity measure and hence establishes the cognitive complexity as a well structured one.
Abstract: Cognitive complexity measure is based on cognitive informatics, which in turn helps in comprehending the software characteristics. Weyuker properties must be satisfied by every complexity measure to qualify as a good and comprehensive one. An attempt has been made to evaluate cognitive complexity measure in terms of nine Weyuker properties, through examples. It has been found that eight of nine Weyuker properties have been satisfied by the cognitive weight software complexity measure and hence establishes the cognitive complexity as a well structured one.
37 citations
••
TL;DR: In this article, the authors presented a two-phase model of blood flow through a porous layered artery in the presence of a uniform magnetic field, and analyzed the effects of various flow parameters on the two-fluid model.
Abstract: In this work, we present a two-phase model of blood flow through a porous layered artery in the presence of a uniform magnetic field. The characteristic of suspensions in blood allows us to assume blood as a micropolar fluid in the core region and plasma as a Newtonian fluid in the peripheral region of a blood vessel. The wall of a blood vessel is porous and composed of a thin Brinkman transition layer followed by a Darcy porous layer of different permeabilities. A magnetic field of uniform strength is transversally applied to the direction of blood flow. The authors obtained an analytical solution of the problem of blood flow through the composite porous walled artery. Analytical expressions for the flow velocity, microrotational velocity, flow rate, and stresses at the wall have been obtained in the closed form using the modified Bessel function. The effects of various flow parameters on the two-fluid model of blood flow are analyzed graphically. An important conclusion which is drawn from the solution of the present problem is that the different permeabilities of Darcy and Brinkman regions of the porous layered artery have a significant effect on the flow. The present work is validated from the previously published literature studies.In this work, we present a two-phase model of blood flow through a porous layered artery in the presence of a uniform magnetic field. The characteristic of suspensions in blood allows us to assume blood as a micropolar fluid in the core region and plasma as a Newtonian fluid in the peripheral region of a blood vessel. The wall of a blood vessel is porous and composed of a thin Brinkman transition layer followed by a Darcy porous layer of different permeabilities. A magnetic field of uniform strength is transversally applied to the direction of blood flow. The authors obtained an analytical solution of the problem of blood flow through the composite porous walled artery. Analytical expressions for the flow velocity, microrotational velocity, flow rate, and stresses at the wall have been obtained in the closed form using the modified Bessel function. The effects of various flow parameters on the two-fluid model of blood flow are analyzed graphically. An important conclusion which is drawn from the solution ...
37 citations
••
TL;DR: In this article, the structural and morphological properties of ZnO nanoparticles were investigated by high resolution transmission electron microscope (HRTEM) and the average particle size of these nanoparticles decreased from 75 to 40nm with the increase in x from 0.00 to 0.20.
36 citations
••
TL;DR: The review shows that VR-OTS provides tangible benefits over its conventional counterparts in terms of improved safety of plant, increased productivity, and environmental protection.
Abstract: Given the factors such as safety, profitability, and environmental concerns at stake, operator training is an everlasting and vital process in the process industry. An inevitable need for skilled operators in the chemical industry leads to search for novel and effective training methodologies. Consequently, dynamic simulation techniques have been considered as a tool to educate and train inexperienced personnel as expected by the industry. Traditional training methodologies are hardly sufficient to instruct the operators for seldom-occurring perilous situations. Conventional operator training simulators (OTS) are generally effective, but they lack to give operators the actual feel of the scenarios. Training effectiveness can be enhanced by providing operators with a sense of realism. Therefore, integration of OTS with virtual reality (VR-OTS) certainly comes out to be an alternative. VR-OTS can replicate emergency conditions, accidents, and investigate safety protocols. In this work, we discuss the need for virtual reality (VR) in OTS, merits of VR-OTS, and the role of training assessment methods. Contributions of OTS Authors’ in process industry from year 2000 to mid-2017 are reviewed and discussed extensively. The review shows that VR-OTS provides tangible benefits over its conventional counterparts in terms of improved safety of plant, increased productivity, and environmental protection. Finally, this paper outlines future scopes that the current researcher may consider to focus for the increased and improved VR-OTS usage.
36 citations
Authors
Showing all 2547 results
Name | H-index | Papers | Citations |
---|---|---|---|
Santosh Kumar | 80 | 1196 | 29391 |
Anoop Misra | 70 | 385 | 17301 |
Naresh Kumar | 66 | 1106 | 20786 |
Munindar P. Singh | 62 | 580 | 20279 |
Arvind Agarwal | 58 | 325 | 12365 |
Mahendra Kumar | 54 | 216 | 9170 |
Jay Singh | 51 | 301 | 8655 |
Lalit Kumar | 47 | 381 | 11014 |
O.N. Srivastava | 47 | 548 | 10308 |
Avinash C. Pandey | 45 | 301 | 7576 |
Sunil Gupta | 43 | 518 | 8827 |
Rakesh Mishra | 41 | 545 | 7385 |
Durgesh Kumar Tripathi | 37 | 133 | 5937 |
Vandana Singh | 35 | 190 | 4347 |
Prashant K. Sharma | 34 | 174 | 3662 |