Institution
Motilal Nehru National Institute of Technology Allahabad
Education•Allahabad, Uttar Pradesh, India•
About: Motilal Nehru National Institute of Technology Allahabad is a education organization based out in Allahabad, Uttar Pradesh, India. It is known for research contribution in the topics: Computer science & Control theory. The organization has 2475 authors who have published 5067 publications receiving 61891 citations. The organization is also known as: NIT Allahabad & Motilal Nehru Regional Engineering College.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: The result demonstrates that van der Waals bonding at the graphene-MoS2 interfaces and high-k dielectric provide an important step toward the realization of high-performance and low-voltage thin-film transistors.
Abstract: Atomically thin two-dimensional (2D) materials are attractive because they have excellent material properties and channel length scalability. Fabrication of complex structures from these materials is also relatively easy. Accordingly, 2D materials such as molybdenum disulfide (MoS2) have been intensively studied because of their novel properties for advanced electronics and optoelectronics. This study realizes the low-voltage and high-performance field-effect transistors with chemical vapor deposition-grown single layer graphene employed as the thinnest electrode and semiconducting multilayer (ML) MoS2 utilized as a channel material. The two-terminal mobility of graphene-contacted ML MoS2 using 15 nm Al2O3 as the top-gate dielectric layer is 131.2 cm2/(V s) at room temperature, which is higher than that of the previously reported metal/graphene-contacted MoS2. The result demonstrates that van der Waals bonding at the graphene–MoS2 interfaces and high-k dielectric provide an important step toward the reali...
24 citations
••
TL;DR: In this paper, the surface smoothness of mango wood polypropylene composites is evaluated by using FESEM images and the 3D surface and surface roughness profile is examined.
24 citations
••
20 Jun 2013TL;DR: The alternative use of electrical discharge grinding and abrasive grinding, which is applied with the application of slotted wheel named as slotted electrodischarge abrasive grinder, is much suita... as mentioned in this paper.
Abstract: The alternative use of electrical discharge grinding and abrasive grinding, which is applied with the application of slotted wheel named as slotted electrodischarge abrasive grinding, is much suita...
24 citations
••
TL;DR: In this article, the surface velocity of four glaciers, namely Bara, Bara and Kulkarni, was analyzed and the results showed that surface velocity is one of the main parameters of glaciers used to interpret the glacier dynamics.
Abstract: Glacier surface velocity is one of the main parameters of the glaciers used to interpret the glacier dynamics. In the present research paper, surface velocity of four glaciers, namely Bara ...
24 citations
••
TL;DR: In this paper, a high entropy alloy was synthesized by premixed high purity Cu, Fe, Ni and Ti powders on AA1050 aluminium substrate by laser surface alloying, with the aim of improving microhardness and erosion rate.
Abstract: AlxCu0.5FeNiTi high entropy alloy coating is synthesized by premixed high purity Cu, Fe, Ni and Ti powders on AA1050 aluminium substrate by laser surface alloying, with the aim to improve microhardness and erosion rate. Phase constituents, microstructure and microhardness were investigated using X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and Vickers Microhardness tester, respectively. The erosion behavior of AlxCu0.5FeNiTi coating is checked using an air jet erosion setup. SEM images show presence of three regions. Percentage compositions of these regions are evaluated using Energy Dispersive Spectroscopy. XRD analysis of AlxCu0.5FeNiTi coating confirmed that these regions are a mixture of disordered BCC and two FCC solid solution phases. The microhardness of the AlxCu0.5FeNiTi HEA is 18 times that of the AA1050 aluminium substrate. Results show that AlxCu0.5FeNiTi HEA coating has improved erosion resistance.
24 citations
Authors
Showing all 2547 results
Name | H-index | Papers | Citations |
---|---|---|---|
Santosh Kumar | 80 | 1196 | 29391 |
Anoop Misra | 70 | 385 | 17301 |
Naresh Kumar | 66 | 1106 | 20786 |
Munindar P. Singh | 62 | 580 | 20279 |
Arvind Agarwal | 58 | 325 | 12365 |
Mahendra Kumar | 54 | 216 | 9170 |
Jay Singh | 51 | 301 | 8655 |
Lalit Kumar | 47 | 381 | 11014 |
O.N. Srivastava | 47 | 548 | 10308 |
Avinash C. Pandey | 45 | 301 | 7576 |
Sunil Gupta | 43 | 518 | 8827 |
Rakesh Mishra | 41 | 545 | 7385 |
Durgesh Kumar Tripathi | 37 | 133 | 5937 |
Vandana Singh | 35 | 190 | 4347 |
Prashant K. Sharma | 34 | 174 | 3662 |