Institution
National Cheng Kung University
Education•Tainan City, Taiwan•
About: National Cheng Kung University is a education organization based out in Tainan City, Taiwan. It is known for research contribution in the topics: Population & Thin film. The organization has 49723 authors who have published 69799 publications receiving 1437420 citations. The organization is also known as: NCKU.
Topics: Population, Thin film, Dielectric, Heat transfer, Microstructure
Papers published on a yearly basis
Papers
More filters
••
01 Dec 2006
TL;DR: A survey and comparative analysis is conducted among several widely used methods that include Pun and Kapur's maximum entropy, Kittler and Illingworth's minimum error thresholding, Pal and Pal's entropy thresholding and Chang et al.'s relative entropy thresholded methods.
Abstract: Entropy-based image thresholding has received considerable interest in recent years. Two types of entropy are generally used as thresholding criteria: Shannon's entropy and relative entropy, also known as Kullback - Leibler information distance, where the former measures uncertainty in an information source with an optimal threshold obtained by maximising Shannon's entropy, whereas the latter measures the information discrepancy between two different sources with an optimal threshold obtained by minimising relative entropy. Many thresholding methods have been developed for both criteria and reported in the literature. These two entropy- based thresholding criteria have been investigated and the relationship among entropy and relative entropy thresholding methods has been explored. In particular, a survey and comparative analysis is conducted among several widely used methods that include Pun and Kapur's maximum entropy, Kittler and Illingworth's minimum error thresholding, Pal and Pal's entropy thresholding and Chang et al.'s relative entropy thresholding methods. In order to objectively assess these methods, two measures, uniformity and shape, are used for performance evaluation.
223 citations
••
TL;DR: Blue-emission (≈470 nm) Cs-based perovskite NCs are derived by directly mixing synthesized bromide and chloride nanocrystals with a weight ratio of 2:1.
Abstract: Inorganic metal halide perovskite nanocrystals (NCs) have been employed universally in light-emitting applications during the past two years. Here, blue-emission (≈470 nm) Cs-based perovskite NCs are derived by directly mixing synthesized bromide and chloride nanocrystals with a weight ratio of 2:1. High-brightness blue perovskite light-emitting diodes (PeLEDs) are obtained by controlling the grain size of the perovskite films. Moreover, a white PeLED is demonstrated for the first time by blending orange polymer materials with the blue perovskite nanocrystals as the active layer. Exciton transfer from the blue nanocrystals to the orange polymers via Forster or Dexter energy transfer is analyzed through time resolved photoluminescence. By tuning the ratio between the perovskite nanocrystals and polymers, pure white light is achieved with the a CIE coordinate at (0.33,0.34).
223 citations
••
TL;DR: A sufficient condition to guarantee the stability of the proposed fuzzy control system is proposed in terms of Lyapunov's method and can be applied to the design of a Fuzzy-PID control system.
223 citations
••
TL;DR: In this article, the 400-nm In/sub 0.95/N-GaN MQW light-emitting diode (LED) structure was compared with the AlGaN barrier layers for barrier layers in the InGaN-AlGaN multiquantum well (MQW) LED.
Abstract: The 400-nm In/sub 0.05/Ga/sub 0.95/N-GaN MQW light-emitting diode (LED) structure and In/sub 0.05/Ga/sub 0.95/N-Al/sub 0.1/Ga/sub 0.9/N LED structure were both prepared by organometallic vapor phase epitaxy. It was found that the use of Al/sub 0.1/Ga/sub 0.9/N as the material for barrier layers would not degrade crystal quality of the epitaxial layers. It was also found that the 20-mA electroluminescence intensity of InGaN-AlGaN multiquantum well (MQW) LED was two times larger than that of the InGaN-GaN MQW LED. The larger maximum output intensity and the fact that maximum output intensity occurred at larger injection current suggest that AlGaN barrier layers can provide a better carrier confinement and effectively reduce leakage current.
222 citations
••
TL;DR: In this article, the microstructures of AISI 4340 high strength alloy steel under different tempering conditions are investigated, and the results indicate that the mechanical properties and microstructural features are affected significantly by tempering temperature and holding time.
222 citations
Authors
Showing all 49872 results
Name | H-index | Papers | Citations |
---|---|---|---|
Yi Chen | 217 | 4342 | 293080 |
Yang Yang | 164 | 2704 | 144071 |
R. E. Hughes | 154 | 1312 | 110970 |
Mercouri G. Kanatzidis | 152 | 1854 | 113022 |
Thomas J. Smith | 140 | 1775 | 113919 |
Hui Li | 135 | 2982 | 105903 |
Gerald M. Reaven | 133 | 799 | 80351 |
Chi-Huey Wong | 129 | 1220 | 66349 |
Joseph P. Vacanti | 119 | 441 | 50739 |
Kai Nan An | 109 | 953 | 51638 |
Ding-Shinn Chen | 104 | 774 | 46068 |
James D. Neaton | 101 | 331 | 64719 |
David C. Christiani | 100 | 1052 | 55399 |
Jo Shu Chang | 99 | 639 | 37487 |
Yu Shyr | 98 | 542 | 39527 |