Institution
National Institute of Technology, Meghalaya
Education•Shillong, India•
About: National Institute of Technology, Meghalaya is a education organization based out in Shillong, India. It is known for research contribution in the topics: Control theory & Electric power system. The organization has 503 authors who have published 1062 publications receiving 6818 citations. The organization is also known as: NIT Meghalaya & NITM.
Papers
More filters
••
TL;DR: In this paper, the wear and frictional behaviour of glass/epoxy composites filled with agro-based waste materials is discussed and discussed. And three different types of agrobased waste material types are compared.
Abstract: In this paper, the authors present and discuss the wear and frictional behaviour of glass/epoxy composites filled with agro-based waste materials. Three different types of agro-based waste material...
4 citations
••
TL;DR: In this paper, an additional tool holding fixture is fabricated and integrated so that distance between the two cutting tools can be varied and has a provision to provide individual depth of cut for improving productivity in a conventional lathe with two single point cutting tools machining a workpiece simultaneously.
Abstract: Productivity enhancement assumes a paramount importance in today’s competitive industrial world. The aim of this work is to improve productivity in a conventional lathe with two single point cutting tools machining a workpiece simultaneously. An additional tool holding fixture is fabricated and integrated so that distance between the two cutting tools can be varied and has a provision to provide individual depth of cut. Experiments were performed on gray cast iron workpiece at different offset distances between the cutting tools, at a particular cutting speed, feed rate and depth of cut. In the multi-tool turning process, lagging rear cutting tool experiences lesser cutting force than leading front cutting tool. This behaviour is due to the machining of front cutting tool preheat as well as reduction of effective cutting speed while machining with rear cutting tool. With increase in offset distance, moment acting on the work piece contributes to increase in resistance against machining and hence front tool experiences higher force than rear cutting tool.
4 citations
••
4 citations
••
TL;DR: Two new design approaches for decimal to binary-coded-decimal (BCD) encoder using reversible logic through Peres gate and Feynman gate which consume 10 and 11 gates respectively to realize such circuitry are proposed.
4 citations
••
TL;DR: A current based proportional-integral DC-bus voltage controller is implemented in this paper, which allows easier calculation of the controller gain parameters and the performance of the current based controller is compared with conventional power based DC- bus controllers in terms of steady state error and settling time.
4 citations
Authors
Showing all 517 results
Name | H-index | Papers | Citations |
---|---|---|---|
Sudip Misra | 48 | 535 | 9846 |
Robert Wille | 43 | 457 | 6881 |
Paul C. van Oorschot | 41 | 150 | 21478 |
Sourav Das | 30 | 174 | 4026 |
Mukul Pradhan | 23 | 53 | 1990 |
Bibhuti Bhusan Biswal | 20 | 155 | 1413 |
Naba K. Nath | 20 | 39 | 1813 |
Atanu Singha Roy | 19 | 48 | 1071 |
Akhilendra Pratap Singh | 19 | 99 | 1775 |
Abhishek Singh | 19 | 107 | 1354 |
Vinay Kumar | 19 | 130 | 1442 |
Dipankar Das | 19 | 67 | 1904 |
Gayadhar Panda | 18 | 123 | 1093 |
Gitish K. Dutta | 16 | 26 | 1168 |
Kamalika Datta | 15 | 69 | 676 |