P A College of Engineering

About: P A College of Engineering is a based out in . It is known for research contribution in the topics: Dihedral angle & Ring (chemistry). The organization has 298 authors who have published 594 publications receiving 4888 citations.

2-Amino-pyrimidinium picrate.

Abstract: The geometric parameters of the title compound, C4H6N3+·C6H2N3O7−, are in the usual ranges. While two nitro groups are almost coplanar with the aromatic picrate ring [dihedral angles 3.0 (2) and 4.4 (3)°], the third is significantly twisted out of this plane [dihedral angle 46.47 (8)°]. Anions and cations are connected via N—H⋯O hydrogen bonds. The mol­ecules crystallize in planes parallel to (1\overline{2}1).

Biodiesel production from castor oil using potassium hydroxide as a catalyst: Simulation and validation

Abstract: The key objective of the present research is to optimize and investigate the biodiesel production from ricinuscommunis (castor) oil using microwave-assisted hybrid transesterfication process under various conditions such as microwave power, treatment time, ethanol:oil ratio and catalyst concentration (KOH). Response surface methodology (RSM) coupled with four factors with a three-level Box–Behnken response surface design (BBD) was employed to model the transesterfication technique. The obtained results were analyzed by analysis of variance (ANOVA) and a second-order polynomial model was developed to study the interactive effect of process factors on biodiesel production. Derringer’s desired function methodology was used for the optimization and optimum conditions for maximizing the biodiesel production. Under optimum conditions, the predicted biodiesel production was found to be 95% with a desirability value of 0.998. The fuel properties of the produced biodiesel were compared with the ASTM D6751 ...

1,5-Bis(4-chlorophenyl)penta-1,4-dien-3-one

Abstract: The title compound, C17H12Cl2O, shows significant non-linear optical activity. A twofold rotation axis passes through the carbonyl group.

An expert system for distribution system reconfiguration through fuzzy logic and flower pollination algorithm

Abstract: Distribution system optimization is one of the essential undertaking should be tended to for productive power system operation A large number of the advancement methodologies were completed at dis

Optimization of dry sliding wear conditions for AlSi10Mg/SiCp composites using response surface: genetic algorithm approach

Abstract: Purpose – The purpose of this research paper is to find the optimum parameters, namely, the sliding speed, applied load and percentage of silicon carbide particles (SiCp), under which AlSi10Mg/SiCp composites experience minimum wear. Design/methodology/approach – Wear rate (WR) of AlSi10Mg, AlSi10Mg/10SiC and AlSi10Mg/20SiC was measured using pin-on-disk equipment according to ASTM G99 standards. Response surface method was used to design the experiments, model and analyze the tribological behaviour. Tests were conducted as per Box–Beheken design of experiments. The wear mechanisms were observed using scanning electron microscope. Genetic algorithm was used to find the optimum parameters for minimum WR. Findings – Wear mechanisms underwent changes with variation in applied load, sliding speed and per cent SiCp. An optimum wear condition was obtained when the process parameters, namely, the sliding speed, applied load and percentage of SiCp, were at 4 m/s, 10 N and 20 per cent, respectively. Combined GA-RS...