Showing papers by "Panasonic published in 2001"

Organic electroluminescent device

Abstract: An organic electroluminescent device comprises a pair of electrodes and a layer structure provided between the paired electrodes and including, at least, an emission layer comprising a specific type of oligomer. The layer structure may further comprise an electron injection layer and an electron transport layer, one of which comprises a specific type of oligomer. Alternatively, the layer structure may be of the type which comprises an organic layer having a charge transport interference layer in the inside thereof along with an emission layer.

Thin film transistor array, method of producing the same, and display panel using the same

Abstract: By imparting conductivity to specified regions of a semiconductor material film 4 formed over a substrate 2 , the semiconductor material film 4 , in addition to being processed into channel portions (active layers) 4 a , source portions 4 b , and drain portions 4 c of TFTs, is processed into conductive elements containing pixel electrodes 10 connected to the drain portions 4 c . Regions composed of an intrinsic semiconductor to which impurities have not been added serve as the active layers (channel regions) of the TFTs and regions to which impurities have been added serve as conductive elements. When transparent electrodes are formed, an oxide semiconductor is used.

Structure of the bacterial flagellar protofilament and implications for a switch for supercoiling.

Abstract: The bacterial flagellar filament is a helical propeller constructed from 11 protofilaments of a single protein, flagellin. The filament switches between left- and right-handed supercoiled forms when bacteria switch their swimming mode between running and tumbling. Supercoiling is produced by two different packing interactions of flagellin called L and R. In switching from L to R, the intersubunit distance ( approximately 52 A) along the protofilament decreases by 0.8 A. Changes in the number of L and R protofilaments govern supercoiling of the filament. Here we report the 2.0 A resolution crystal structure of a Salmonella flagellin fragment of relative molecular mass 41,300. The crystal contains pairs of antiparallel straight protofilaments with the R-type repeat. By simulated extension of the protofilament model, we have identified possible switch regions responsible for the bi-stable mechanical switch that generates the 0.8 A difference in repeat distance.

Polymer, resist composition and patterning process

Abstract: A polymer obtained through copolymerization of a monomer having a hexafluoroalcohol pendant whose hydroxyl moiety has been protected and a monomer having an acid labile group is useful as an additive to a photoresist composition for immersion lithography. When processed by immersion lithography, the resist composition exhibits good water repellency and water slip and produces few development defects.

Method and an apparatus for reproducing bitstream having non-sequential system clock data seamlessly therebetween

Abstract: A system stream contiguous reproduction apparatus to which are input one or more system streams interleaving at least moving picture data and audio data, and system stream connection information includes a system clock STC generator for producing the system clock that is used as the system stream reproduction reference clock. The system stream contiguous reproduction apparatus further includes one or more signal processing decoders that operate referenced to the system clock STC, decoder buffers for temporarily storing the system stream data transferred to the corresponding signal processing decoders, and STC selectors for selecting a system clock STC referenced by the signal processing decoders when decoding the first system stream, and another system clock STC referenced by the signal processing decoders when decoding a second system stream reproduced contiguously to the first system stream.

Active noise control system

Abstract: An active noise control system is capable of canceling out noise in the passenger compartment of a vehicle based on low-frequency road noise. The active noise control system has a feed-forward control unit for being supplied with reference signals highly correlated to noise from a noise source and generating a noise cancellation signal which is out of phase to noise in the passenger compartment of the vehicle, and a canceling sound generating unit disposed in the passenger compartment for generating a noise canceling sound in response to the noise cancellation signal from said feed-forward control unit. The active noise control system also has microphones for generating reference signals which are positioned respectively near the base of the front seat, near the center of a roof, and within a trunk compartment, i.e., respectively at vibrational antinodes of a primary or secondary acoustic normal mode of the passenger compartment in the longitudinal direction thereof. Output signals from the microphones are supplied as the reference signals.

Mobile phone with music reproduction function, music data reproduction method by mobile phone with music reproduction function, and the program thereof

Abstract: A mobile phone 100 with music reproduction function comprising a reproduction unit 106 that reproduces music data and a ring tone which are recorded in a music data recording medium 105 and a ring tone, a communication unit 108 that detects an incoming call from outside and a control unit 103 that instructs the reproduction unit 106 to perform a fade-out process of reproducing music data and to perform a fade-in process of outputting a ring tone when the communication unit 108 detects an incoming call while the reproduction unit 106 is reproducing music data.

Apparatus for retrieving similar documents and apparatus for extracting relevant keywords

Abstract: After three kinds of data, i.e., a keyword frequency-of-appearance (103), a document length (105), and a keyword weight (107) are produced, a document profile vector (111) and a keyword profile vector (109) are calculated. Then, by independently performing the weighted principal component analysis (112,114) considering the document length and the keyword weight, a document feature vector and a keyword feature vectors are obtained. Then, documents and keywords having higher similarity to the feature vectors calculated with reference to the retrieval and extracting conditions are obtained and displayed.

Focused language models for improved speech input of structured documents

Abstract: An e-mail message process is provided for use with a personal digital assistant which allows for the use of input speech messaging which is converted to text using a focused language model which is downloaded by a cellular phone connection to an Internet server which provides the focused language model based upon a topic for the intended e-mail message. The text that is generated from the input speech method can be summarized by the e-mail message processor and can be edited by the user. The generated e-mail message can then be transmitted again via cellular connection to an Internet e-mail server for transmitting the e-mail message to a recipient.

Dielectric resonator antenna for a mobile communication

Abstract: A hemispherical dielectric resonator is arranged on a metal substrate to make a flat surface of the hemispherical dielectric resonator contact with the metal substrate, and a dielectric wave-guiding channel is connected with a curved side surface of the hemispherical dielectric resonator. Therefore, a dielectric resonance antenna in which the hemispherical dielectric resonator and the dielectric wave-guiding channel are placed on the same metal substrate is obtained. A signal transmitting through the dielectric wave-guiding channel is fed in the hemispherical dielectric resonator, the hemispherical dielectric resonator is resonated, and an electromagnetic wave is radiated. Therefore, the dielectric resonance antenna functions as a wave radiation device.

Battery and maintenance service system for power supply device

Abstract: A portable personal computer (2) accesses a service handling server (1) established on the Internet (5) to transmit data from a power supply monitor unit (4). The service handling server (1) checks, by referring to a power supply information database (22), for abnormality data received with a type of a portable personal computer (2) specified, and, when it is not abnormal, sends back an OK answer, but e-mails abnormality handling information when it is abnormal.

Stereoscopic computer graphics image generating apparatus and stereoscopic TV apparatus

Abstract: The stereoscopic CG image generating apparatus and a stereoscopic. TV apparatus, has a projection transformation section which, based on three-dimensional structural information describing a three-dimensional shape of an object, generates a plurality of two-dimensional projection models as viewed from a plurality of viewpoints, a distance information extraction section which generates a camera-to-object distance information used for calculations in the projection transformation section, and a camera parameter determining section which, based on the output of the distance information extraction section, the screen size of a stereoscopic image display device for displaying finally generated two-dimensional projection models, and a viewer's viewing distance, determines camera parameters so that stereoscopic CG images will be brought within the viewer's binocular fusional range. According to the thus constructed stereoscopic CG image generating apparatus and stereoscopic TV apparatus, proper camera parameters (focal length or field of view, camera spacing, and converging point) are determined based on the camera-to-object distance information, the magnitude of parallax of the generated stereoscopic CG images on the display device (or in a window on the display screen), and the viewing distance, so that easy-to-view stereoscopic CG images are automatically generated regardless of the display size, and by horizontally translating left-eye and right-eye images, binocular parallax of displayed images is automatically brought within the viewer's binocular fusional range regardless of the size of a stereoscopic display used.

Coordinate input device and portable information apparatus equipped with coordinate input device

Abstract: A coordinate input device has a keyboard; a rotary dial annular in shape and mounted in substantially the same plane as the keyboard, the rotary dial being rotatable within the plane; and a rotation detector for detecting the amount and direction of rotation of the rotary dial, and wherein: the rotary dial is disposed below the keyboard

Roles of partly unfolded conformations in macromolecular self-assembly.

Abstract: From genes to cells there are many steps of hierarchical increments in building up complex frameworks that provide intricate networks of macromolecular interactions, through which cellular activities such as gene expression, signal processing, energy transduction and material conversion are dynamically organized and regulated. The self-assembly of macromolecules into large complexes is one such important step, but this process is by no means a simple aggregation of macromolecules with predefined, rigid complementary structures. In many cases the component molecules undergo either domain rearrangements or folding of disordered portions, which occurs only following binding to their correct partners. The partial disorder is used in some cases to prevent spontaneous assembly at inappropriate times or locations. It is also often used for finely tuning the equilibrium and activation energy of reversible binding. In other cases, such as protein translocation across membranes, an unfolded terminus appears to be the prerequisite for the process as an initiation signal, as well as the physical necessity to be taken into narrow channels. Self-assembly processes of viruses and bacterial flagella are typical examples where the induced folding of disordered chains plays a key role in regulating the addition of new components to a growing assembly. Various aspects of mechanistic roles of natively unfolded conformations of proteins are overviewed and discussed in this short review.

On-vehicle handsfree system and mobile terminal thereof

Abstract: A handsfree video phone system includes a video phone terminal and a car device in which a microphone, a speaker, and a camera are connected with an instrument panel via a cable. The video phone terminal is connected with the instrument panel via a wireless communication medium. When the video phone terminal is brought into the vehicle, the instrument panel informs the video phone terminal of the attribute information on the system structure. According to the attribute information, the video phone terminal switches the paths of multiplexed audio-video data so as to replace a microphone, a speaker, a camera, and a display that have been built in the video phone terminal with the microphone, the speaker, the camera, and a display of the instrument panel when the status changes to the communication status.

Method for design of partial circuit

Abstract: There is no conventional method for precisely estimating under what external conditions each partial circuit, such as a library cell, is utilized in an actual integrated circuit at the time of designing the partial circuit. Therefore, by estimating the external conditions of a partial circuit when used in an integrated circuit so that the partial circuit is designed in accordance with the external conditions, the partial circuit having optimal performance for the external conditions can be designed. The step of external condition estimation can be formed so as to include the technology conversion step which technologically converts the layout for external condition extraction, that is prepared in advance, based on the technology information of an integrated circuit, which is the design objective; the layout extraction step of extracting layout extraction information which is external information influencing the operation of the partial circuit from the layout for external condition extraction that has been technologically converted; and the external condition calculation step of calculating external conditions of the partial circuit from the layout extraction information. In addition, by simply replacing the designed partial circuit with a partial circuit of a circuit for evaluation, the evaluation of the designed partial circuit can be easily carried out.

Text selection and recording by feedback and adaptation for development of personalized text-to-speech systems

Abstract: A new speaker provides speech from which comparison snippets are extracted. The comparison snippets are compared with initial snippets stored in a recorded snippet database that is associated with a concatenative synthesizer. The comparison of the snippets to the initial snippets produces required sound units. A greedy selection algorithm is performed with the required sound units for identifying the smallest subset of the input text that contains all of the text for the new speaker to read. The new speaker then reads the optimally selected text and sound units are extracted from the human speech such that the recorded snippet database is modified and the speech synthesized adopts the voice quality and characteristics of the new speaker.

Antenna and radio device comprising the same

Abstract: An antenna for receiving a radio wave of a plurality of frequencies, excellent in gain, reliability, and productivity and a radio device comprising the same. One end of a feeding part of the antenna is electrically connected to an antenna element part; the other is electrically connected to a high frequency circuit of a radio device. The rod of a dielectric mechanically holds the antenna element part. A radome of a dielectric covers the antenna element part and a part of the feeding part. The antenna element part comprises a rod, a generally spiral section concentric with the rod and composed of a narrow band conductive plate, and a generally meandered section. The dimensions of the generally spiral section and generally meandered section are adequately determined, thereby realizing favorable impedance characteristics in frequency bands.

Plane-like lighting units and display equipment provided therewith

Abstract: A light unit which includes a plurality of light-emitting diode (LED) light sources arranged in parallel, a light-guiding member arranged on said LED light sources, a light reflecting part for reflecting light from said LED light sources forward, a light diffusion part for outgoing light from the surface of said light-guiding member to outside, and an optical path changing part arranged above said light-diffusion part, wherein a side of said light-guiding member that faces said light diffusion part is flat.

Eye position detection method and device

Abstract: The position of an eye is detectable with high precision from a face image of a person taken under near infrared illumination or the like. After pre-processing, the face image is subjected to brightness correction to increase the contrast between the sclera portion and iris portion of the eye. Brightness gradient vectors are calculated for the brightness-corrected image, and matching is performed between a brightness gradient image generated using the calculated brightness gradient vectors and an eye template. Further, matching with a pupil template is performed to correct the eye center position. Final positions of both eyes are then determined.

Biosensor, Measuring Instrument for Biosensor, and Method of Quantifying Substrate

Abstract: A method of measuring a quantity of a substrate contained in sample liquid is provided. This method can reduce measurement errors caused by a biosensor. The biosensor includes at least a pair of electrodes on an insulating board and is inserted into a measuring device which includes a supporting section for supporting detachably the biosensor, plural connecting terminals to be coupled to the respective electrodes, and a driving power supply which applies a voltage to the respective electrodes via the connecting terminals. One of the electrode of the biosensor is connected to the first and second connecting terminals of the measuring device only when the biosensor is inserted into the measuring device in a given direction, and has a structure such that the electrode becomes conductive between the first and second connection terminals due to a voltage application by the driving power supply.

Magneto-resistance effect element magneto-resistance effect memory cell, MRAM, and method for performing information write to or read from the magneto-resistance effect memory cell

Abstract: A magneto-resistive effect element includes a first ferromagnetic film; a second ferromagnetic film; and a first nonmagnetic film interposed between the first ferromagnetic film and the second ferromagnetic film. The first ferromagnetic film has a magnetization more easily rotatable than a magnetization of the second ferromagnetic film by an external magnetic field. The first ferromagnetic film has an effective magnetic thickness of about 2 nm or less.

Information embedding method, information extracting method, information embedding apparatus, information extracting apparatus, and recording media

Abstract: An apparatus for embedding secret information in an image signal transmitted with a shape signal showing the shape of an object is described. This apparatus comprises an embedding position decision unit for deciding a position in the object where the secret information is to be embedded, according to the shape signal; and a compositor for embedding the secret information in the position decided by the decision unit. Therefore, the secret information is protected against translation or clipping of image.

Method for aiding space design using network, system therefor, and server computer of the system

Abstract: Provided is an environment which enables a user to implement 3D space design on a computer accessible to a server computer via a network. The server computer includes a layout design program which is operable on a screen activated by a browser of the client computer to enable the user to implement space design of a layout in the terms of a 2D image, an object database which stores object data used for layout design for retrieval and extraction, and a 3D display program which is operable on the browser screen of the client computer to display the designed space in the terms of a 3D image. The client computer is equipped with the browser capable of executing programs of the layout design program and the 3D display program. Upon receiving the layout design program and the 3D display program from the server computer via the network, the programs of the layout design program and the 3D display program are executable on the browser screen.

Zero configuration networking

Abstract: The Routing Information Protocol [RIP] is extended to include a network-wide unique interface identifier [UID] that allows the zeroconfiguration multiple router [R1, R2] network to detect subnet conflicts. Detected conflicts are automatically repaired by the respective routers assigning and advertising new subnet mappings. The extended, Zeroconfiguration Routing Information Protocol [ZRIP] employs a NORMAL/CHANGE status flag associated with each routing table entry to resolve ambiguity between normal routing advertisements and conflict notifications. Address re-mapping and name-to-address resolution is provided to support both network address translation [NAT] and virtualized address paradigms.

File management apparatus

Abstract: A password registration unit encrypts key information using an input password, and stores the generated encrypted key as a file into a computer. A file encryption unit generates a file key arbitrarily, encrypts the file key using the key information, encrypts a plaintext using the file key to generate a ciphertext, and stores an encrypted file including the encrypted file key in its header part and the ciphertext in its data part. A file decryption unit decrypts the encrypted file key using the key information to obtain a file key, or receives an input of a password, decrypts the encrypted key using the password to obtain key information, and decrypts the encrypted file key using the key information to obtain a file key. The file decryption unit then decrypts the ciphertext using the obtained file key.

Computer network security system employing portable storage device

Abstract: The trusted computer network is protected behind a gateway that includes a bastion host and screening router which blocks all URLs associated with the trusted network. The bastion host includes a remote client authentication mechanism and web proxy component that verifies and translates incoming URL requests from authenticated remote clients. Authentication is performed using one-time passwords that are stored on a portable storage device. The user configures the portable storage device by operating configuration software from the protected side of the gateway. The portable storage device also stores plug-in software to enable the client computer to properly retrieve the one-time password and exchange authentication messages with the bastion host. Further security is obtained by basing the one-time password on an encrypted version of the user's PIN. A symmetric key used to encrypt the PIN is stored in a protected area within the portable storage device.