Institution
Phoenix Contact
Company•Middletown, Pennsylvania, United States•
About: Phoenix Contact is a company organization based out in Middletown, Pennsylvania, United States. It is known for research contribution in the topics: Terminal (electronics) & Clamping. The organization has 1257 authors who have published 2097 publications receiving 7673 citations. The organization is also known as: Phoenix Contact (Germany).
Papers published on a yearly basis
Papers
More filters
•
28 Sep 2017TL;DR: In this paper, ein Steckverbinderteil (3) mit einem Gegensteckverbindler (40) umfasst ein kontaktelement (31, 32) zum elektrischen Kontaktieren with einem zugeordneten gegenkontakter (400) des GegENsteck verbinderteils (40), und weist einen Schaftabschnitt (312), zum Anschliesen einer Lastleitung (21
Abstract: Ein Steckverbinderteil (3) zum Verbinden mit einem Gegensteckverbinderteil (40) umfasst ein Kontaktelement (31, 32) zum elektrischen Kontaktieren mit einem zugeordneten Gegenkontaktelement (400) des Gegensteckverbinderteils (40). Das Kontaktelement (31, 32) weist einen Kontaktabschnitt (310) zum Kontaktieren mit dem Gegenkontaktelement (400) des Gegensteckverbinderteils (40) und einen Schaftabschnitt (312) zum Anschliesen einer Lastleitung (21, 22) zum Ubertragen eines elektrischen Stroms auf. In dem Kontaktelement (31, 32) ist ein Kanal (317) erstreckt, mit dem zumindest eine Kuhlmittelleitung (23–26) stromungsverbindbar ist, zum Fuhren eines Kuhlmittels durch das Kontaktelement (31, 32). Auf diese Weise wird ein Steckverbinderteil mit einem Kontaktelement zur Verfugung gestellt, das eine grose Stromtragfahigkeit beispielsweise zur Verwendung in einem Ladesystem zum Aufladen eines Elektrofahrzeugs aufweisen kann.
10 citations
•
14 Jun 2013TL;DR: In this article, a Wechselstrom-Trunkleitung and an angeschlossene Stichkabel zum Einspeisen des Wehselstroms aus der Mehrzahl von Modulwechselrichtern in die gemeinsame Wehlstrom-trunkleithung auf, so dass die Wehlströmtrung entfernt von den Modul-richtern verlegbar ist, and ist aus einer MehrZahl von vorkonfektion
Abstract: Es wird eine Wechselstromverkabelung fur einen Photovoltaikgenerator mit einer Mehrzahl von mit Modulwechselrichtern ausgestatteten Photovoltaikmodulen gezeigt. Die Wechselstromverkabelung weist eine Wechselstrom-Trunkleitung und hieran angeschlossene Stichkabel zum Einspeisen des Wechselstroms aus der Mehrzahl von Modulwechselrichtern in die gemeinsame Wechselstrom-Trunkleitung auf, so dass die Wechselstrom-Trunkleitung entfernt von den Modulwechselrichtern verlegbar ist, und ist aus einer Mehrzahl von vorkonfektionierten Kabelmodulen zusammengesetzt. Die vorkonfektionierten Kabelmodule umfassen dabei jeweils folgende Bauteile: Einen ersten und zweiten Trunkleitungs-Steckverbinder, einen den ersten und zweiten Trunkleitungs-Steckverbinder verbindenden Trunkleitungs-Kabelabschnitt und ein elektrisch mit dem Trunkleitungs-Kabelabschnitt verbundenes Stichkabel. Die Kabelmodule sind dabei mittels ihrer ersten und zweiten Trunkleitungs-Steckverbinder zu einer seriellen Kette zusammengesteckt, so dass die somit seriell geschalteten Trunkleitungs-Kabelabschnitte gemeinsam die Wechselstrom-Trunkleitung bilden, wobei den Modulwechselrichtern jeweils ein Kabelmodul mit einem Stichkabel zugeordnet ist, so dass die Modulwechselrichter mittels des jeweils zugeordneten Stichkabels an die Wechselstrom-Trunkleitung anschliesbar sind, und wobei die Stichkabel mit einem Leiterende jeweils direkt entweder an den ersten oder den zweiten Trunkleitungs-Steckverbinder des zugehorigen Kabelmoduls angeschlossen und fest mit diesem verbunden sind.
10 citations
••
TL;DR: It is shown that the no-contact and simple design of synchronous reluctance machines means that the opportunities for using them on drilling rigs are great and with properly selected main dimensions and phase current control laws, the specific weight–size parameters of these machines can be improved as compared with their induction counterparts.
Abstract: An electromagnetic design procedure is proposed that allows taking into account the features of jointly utilizing a semiconductor converter and an electric machine in an electric drive system. The parameters of an electric machine are viewed as distributed and found by solving differential equations with distributed parameters, while the variables of control signals are defined by the conventional numerical techniques of a system of ordinary differential equations. The procedure allows defining the potential reserves of magnetoelectrically excited synchronous machines for drilling rig facilities for the power-to-mass ratio. As was shown by the calculations, the choice of the machine’s rated parameters and main dimensions allows using synchronous machines twice as efficiently in terms of power. It is shown that the no-contact and simple design of synchronous reluctance machines means that the opportunities for using them on drilling rigs are great. With properly selected main dimensions and phase current control laws, the specific weight–size parameters of these machines can be improved as compared with their induction counterparts.
10 citations
•
05 May 2000TL;DR: In this paper, a bipartite housing is provided with a lower housing part and an upper housing part, and a plurality of grooves for the uptake of the wires of the second cable, at least a part of the grooves being oblique to the longitudinal axis of the housing.
Abstract: A cable connector ( 1 ) with a connection device ( 2 ) which is connected to a first conductor cable with a linking device ( 4 ) in a housing ( 3 ) used for insertion of a connection area ( 6 ) which is free of cable insulation ( 5 ) of a second cable ( 7 ) and for electrically connecting the first cable with the second cable ( 7 ) wherein the connecting device ( 2 ) and the linking device ( 4 ) are aligned so that the first cable and the second cable ( 7 ) are connected, preferably approximately rectangular to one another. In order to easily connect the first cable with the second cable ( 7 ), to a bipartite housing is provided having a lower housing part ( 8 ) and an upper housing part. In the lower housing part ( 8 ), there are a plurality of grooves ( 10 ) for the uptake of the wires ( 11 ) of the second cable ( 7 ), at least a part of the grooves ( 10 ) being oblique to the longitudinal axis (L) of the housing ( 3 ). Knife-switch prongs ( 12 ) are provided which have one of their ends directed toward the grooves ( 10 ) and are provided for cutting through the wire insulation and for connection to conductors in the second cable ( 7 ), the knife-switch prongs ( 12 ) being connectable to the conductors in the first cable with their second end.
10 citations
Authors
Showing all 1261 results
Name | H-index | Papers | Citations |
---|---|---|---|
Jurgen Jasperneite | 25 | 139 | 2208 |
Dathan Hamann | 15 | 42 | 639 |
Heinz Reibke | 11 | 58 | 277 |
Eberhard Dipl Ing Lehmann | 11 | 19 | 251 |
Klaus Prof Dr Ing Scheibe | 10 | 19 | 209 |
Thomas Salomon | 8 | 18 | 186 |
Martin Wetter | 8 | 42 | 146 |
Klaus Eisert | 8 | 15 | 155 |
Andreas Schrader | 8 | 28 | 185 |
Gunnar Lessmann | 7 | 34 | 131 |
Feye-Hohmann Juergen | 7 | 26 | 151 |
Rainer Durth | 7 | 25 | 154 |
Dietmar Krumsiek | 7 | 39 | 165 |
Thomas Führer | 7 | 40 | 154 |
Stefan Giefers | 7 | 19 | 184 |