Showing papers by "Rensselaer Polytechnic Institute published in 2007"

Matrix metalloproteinases and the regulation of tissue remodelling

Abstract: Matrix metalloproteinases (MMPs) were discovered because of their role in amphibian metamorphosis, yet they have attracted more attention because of their roles in disease. Despite intensive scrutiny in vitro, in cell culture and in animal models, the normal physiological roles of these extracellular proteases have been elusive. Recent studies in mice and flies point to essential roles of MMPs as mediators of change and physical adaptation in tissues, whether developmentally regulated, environmentally induced or disease associated.

New thermodynamic models and revised calibrations for the Ti-in-zircon and Zr-in-rutile thermometers

Abstract: The models recognize that ZrSiO4, ZrTiO4, and TiSiO4, but not ZrO2 or TiO2, are independently variable phase components in zircon. Accordingly, the equilibrium controlling the Zr content of rutile coexisting with zircon is ZrSiO4 = ZrO2 (in rutile) + SiO2. The equilibrium controlling the Ti content of zircon is either ZrSiO4 + TiO2 = ZrTiO4 + SiO2 or TiO2 + SiO2 = TiSiO4, depending whether Ti substitutes for Si or Zr. The Zr content of rutile thus depends on the activity of SiO2 $$(a_{\text{SiO}_{2}})$$ as well as T, and the Ti content of zircon depends on $$a_{\text{SiO}_{2}}$$ and $$a_{\text{TiO}_{2}}$$ as well as T. New and published experimental data confirm the predicted increase in the Zr content of rutile with decreasing $$a_{\text{SiO}_{2}},$$ and unequivocally demonstrate that the Ti content of zircon increases with decreasing $$a_{\text{SiO}_{2}}$$ . The substitution of Ti in zircon therefore is primarily for Si. Assuming a constant effect of P, unit $$a_{\text{ZrSiO}_{4}},$$ and that $$a_{\text{ZrO}_{2}}$$ and $$a_{\text{ZrTiO}_{4}}$$ are proportional to ppm Zr in rutile and ppm Ti in zircon, [log(ppm Zr-in-rutile) + log $$a_{\text{SiO}_{2}}$$ ] = A1 + B1/T(K) and [log(ppm Ti-in-zircon) + log $$a_{\text{SiO}_{2}}$$ − log $$a_{\text{TiO}_{2}}$$ ] = A2 + B2/T, where the A and B are constants. The constants were derived from published and new data from experiments with $$a_{\text{SiO}_{2}}$$ buffered by either quartz or zircon + zirconia, from experiments with $$a_{\text{SiO}_{2}}$$ defined by the Zr content of rutile, and from well-characterized natural samples. Results are A1 = 7.420 ± 0.105; B1 = −4,530 ± 111; A2 = 5.711 ± 0.072; B2 = −4,800 ± 86 with activity referenced to α-quartz and rutile at P and T of interest. The zircon thermometer may now be applied to rocks without quartz and/or rutile, and the rutile thermometer applied to rocks without quartz, provided that $$a_{\text{SiO}_{2}}$$ and $$a_{\text{TiO}_{2}}$$ are estimated. Maximum uncertainties introduced to zircon and rutile thermometry by unconstrained $$a_{\text{SiO}_{2}}$$ and $$a_{\text{TiO}_{2}}$$ can be quantitatively assessed and are ≈60 to 70°C at 750°C. A preliminary assessment of the dependence of the two thermometers on P predicts that an uncertainty of ±1 GPa introduces an additional uncertainty at 750°C of ≈50°C for the Ti-in-zircon thermometer and of ≈70 to 80°C for the Zr-in-rutile thermometer.

The impact of psychological contract breach on work-related outcomes: a meta-analysis

Abstract: A meta-analysis was conducted to examine the influence of psychological contract breach on 8 work-related outcomes. Breach was related to all outcomes except actual turnover. Based on affective events theory, we developed a causal model integrating breach, affect (violation and mistrust), attitude (job satisfaction, organizational commitment, and turnover intentions), and individual effectiveness (actual turnover, organizational citizenship behavior, and in-role performance). Structural equation modeling was used to test the model. The results indicated that affect mediates the effect of breach on attitude and individual effectiveness. Two moderators were also examined including the type of breach measure (global vs. composite) and the content of the psychological contract breach (transactional vs. relational). Theoretical and practical implications of the results are discussed.

“Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes

Abstract: The self-organization of the polymer in solar cells based on regioregular poly(3-hexylthiophene) (RR-P3HT):[6,6]-phenyl C61-butyric acid methyl ester (PCBM) is studied systematically as a function of the spin-coating time ts (varied from 20–80 s), which controls the solvent annealing time ta, the time taken by the solvent to dry after the spin-coating process. These blend films are characterized by photoluminescence spectroscopy, UV-vis absorption spectroscopy, atomic force microscopy, and grazing incidence X-ray diffraction (GIXRD) measurements. The results indicate that the π-conjugated structure of RR-P3HT in the films is optimally developed when ta is greater than 1 min (ts ∼ 50 s). For ts < 50 s, both the short-circuit current (JSC) and the power conversion efficiency (PCE) of the corresponding polymer solar cells show a plateau region, whereas for 50 < ts < 55 s, the JSC and PCE values are significantly decreased, suggesting that there is a major change in the ordering of the polymer in this time window. The PCE decreases from 3.6 % for a film with a highly ordered π-conjugated structure of RR-P3HT to 1.2 % for a less-ordered film. GIXRD results confirm the change in the ordering of the polymer. In particular, the incident photon-to-electron conversion efficiency spectrum of the less-ordered solar cell shows a clear loss in both the overall magnitude and the long-wavelength response. The solvent annealing effect is also studied for devices with different concentrations of PCBM (PCBM concentrations ranging from 25 to 67 wt %). Under “solvent annealing” conditions, the polymer is seen to be ordered even at 67 wt % PCBM loading. The open-circuit voltage (VOC) is also affected by the ordering of the polymer and the PCBM loading in the active layer.

Flexible energy storage devices based on nanocomposite paper

Abstract: There is strong recent interest in ultrathin, flexible, safe energy storage devices to meet the various design and power needs of modern gadgets. To build such fully flexible and robust electrochemical devices, multiple components with specific electrochemical and interfacial properties need to be integrated into single units. Here we show that these basic components, the electrode, separator, and electrolyte, can all be integrated into single contiguous nanocomposite units that can serve as building blocks for a variety of thin mechanically flexible energy storage devices. Nanoporous cellulose paper embedded with aligned carbon nanotube electrode and electrolyte constitutes the basic unit. The units are used to build various flexible supercapacitor, battery, hybrid, and dual-storage battery-in-supercapacitor devices. The thin freestanding nanocomposite paper devices offer complete mechanical flexibility during operation. The supercapacitors operate with electrolytes including aqueous solvents, room temperature ionic liquids, and bioelectrolytes and over record temperature ranges. These easy-to-assemble integrated nanocomposite energy-storage systems could provide unprecedented design ingenuity for a variety of devices operating over a wide range of temperature and environmental conditions.

A prospective investigation of major depressive disorder and comorbidity in abused and neglected children grown up.

Abstract: Context Few prospective longitudinal studies have examined the relationship between abuse or neglect in childhood and depression in adulthood. Objective To determine whether abused and neglected children were at elevated risk of major depressive disorder (MDD) and psychiatric comorbidity, compared with matched control subjects, when followed up into young adulthood. Design Prospective cohort design study. Setting Midwestern metropolitan county area. Participants Children with substantiated cases of physical and sexual abuse and neglect (before the age of 11 years) from January 1, 1967, to December 31, 1971 (n = 676) were matched based on age, race, sex, and approximate family social class with a group of nonabused and nonneglected children (n = 520) and followed up into young adulthood (mean age, 28.7 years). Main Outcomes Measures Between October 20, 1989, and December 22, 1995, 2-hour in-person interviews were conducted, using the National Institute of Mental Health Diagnostic Interview Schedule, Version III Revised, to determine DSM-III-R MDD and other psychiatric diagnoses. Results Child abuse and neglect were associated with an increased risk for current MDD (odds ratio [OR], 1.51; 95% confidence interval [CI], 1.06-2.14; P ≤.05) in young adulthood. Children who were physically abused (OR, 1.59; 95% CI, 1.00-2.52; P ≤.05) or experienced multiple types of abuse (OR, 1.75; 95% CI, 1.01-3.02; P ≤.05) were at increased risk of lifetime MDD, whereas neglect increased risk for current MDD (OR, 1.59; 95% CI, 1.10-2.29; P df = 1; P =.04) showed earlier onset of MDD for abused and neglected children compared with controls. Among those with MDD, comorbidity was higher for abused and neglected individuals than for controls. Conclusion These results support the need for clinicians to increase efforts to detect and treat depression in physically abused and neglected children.

Cats and dogs, hair and a hero: A quintet of new milky way companions

Abstract: We present five new satellites of the Milky Way discovered in Sloan Digital Sky Survey (SDSS) imaging data, four of which were followed-up with either the Subaru or the Isaac Newton Telescopes. They include four probable new dwarf galaxies--one each in the constellations of Coma Berenices, Canes Venatici, Leo and Hercules--together with one unusually extended globular cluster, Segue 1. We provide distances, absolute magnitudes, half-light radii and color-magnitude diagrams for all five satellites. The morphological features of the color-magnitude diagrams are generally well described by the ridge line of the old, metal-poor globular cluster M92. In the last two years, a total of ten new Milky Way satellites with effective surface brightness {mu}{sub v} {approx}> 28 mag arcsec{sup -2} have been discovered in SDSS data. They are less luminous, more irregular and appear to be more metal-poor than the previously-known nine Milky Way dwarf spheroidals. The relationship between these objects and other populations is discussed. We note that there is a paucity of objects with half-light radii between {approx} 40 pc and {approx} 100 pc. We conjecture that this may represent the division between star clusters and dwarf galaxies.

The Fifth Data Release of the Sloan Digital Sky Survey

Abstract: This paper describes the Fifth Data Release (DR5) of the Sloan Digital Sky Survey (SDSS). DR5 includes all survey quality data taken through 2005 June and represents the completion of the SDSS-I project (whose successor, SDSS-II, will continue through mid-2008). It includes five-band photometric data for 217 million objects selected over 8000 deg^2 and 1,048,960 spectra of galaxies, quasars, and stars selected from 5713 deg^2 of that imaging data. These numbers represent a roughly 20% increment over those of the Fourth Data Release; all the data from previous data releases are included in the present release. In addition to "standard" SDSS observations, DR5 includes repeat scans of the southern equatorial stripe, imaging scans across M31 and the core of the Perseus Cluster of galaxies, and the first spectroscopic data from SEGUE, a survey to explore the kinematics and chemical evolution of the Galaxy. The catalog database incorporates several new features, including photometric redshifts of galaxies, tables of matched objects in overlap regions of the imaging survey, and tools that allow precise computations of survey geometry for statistical investigations.

Passivity as a Design Tool for Group Coordination

Abstract: We pursue a group coordination problem where the objective is to steer the differences between output variables of the group members to a prescribed compact set. To stabilize this set we study a class of feedback rules that are implementable with local information available to each member. When the information flow between neighboring members is bidirectional, we show that the closed-loop system exhibits a special interconnection structure which inherits the passivity properties of its components. By exploiting this structure we develop a passivity-based design framework, which results in a broad class of feedback rules that encompass as special cases some of the existing formation stabilization and group agreement designs in the literature. The passivity approach offers additional design flexibility compared to these special cases, and systematically constructs a Lurie-type Lyapunov function for the closed-loop system. We further study the robustness of these feedback laws in the presence of a time-varying communication topology, and present a persistency of excitation condition which allows the interconnection graph to lose connectivity pointwise in time as long as it is established in an integral sense.

Ultralow Thermal Conductivity in Disordered, Layered WSe2 Crystals

Abstract: The cross-plane thermal conductivity of thin films of WSe2 grown from alternating W and Se layers is as small as 0.05 watts per meter per degree kelvin at room temperature, 30 times smaller than the c-axis thermal conductivity of single-crystal WSe2 and a factor of 6 smaller than the predicted minimum thermal conductivity for this material. We attribute the ultralow thermal conductivity of these disordered, layered crystals to the localization of lattice vibrations induced by the random stacking of two-dimensional crystalline WSe2 sheets. Disordering of the layered structure by ion bombardment increases the thermal conductivity.

An Empirical Analysis of the Strategic Use of Corporate Social Responsibility

Abstract: Recent theories of the strategic use of corporate social responsibility (CSR) emphasize the role of information asymmetry and how CSR is likely to be incorporated into a firm's product differentiation strategy. A key empirical implication of these theories is that firms selling experience or credence goods are more likely to be socially responsible than firms selling search goods. Using firm-level data, we report evidence that is consistent with this hypothesis.

The SEGUE Stellar Parameter Pipeline. I. Description and Initial Validation Tests

Abstract: We describe the development and implementation of the SEGUE (Sloan Extension for Galactic Exploration and Understanding) Stellar Parameter Pipeline (SSPP). The SSPP derives, using multiple techniques, radial velocities and the fundamental stellar atmospheric parameters (effective temperature, surface gravity, and metallicity) for AFGK-type stars, based on medium-resolution spectroscopy and $ugriz$ photometry obtained during the course of the original Sloan Digital Sky Survey (SDSS-I) and its Galactic extension (SDSS-II/SEGUE). The SSPP also provides spectral classification for a much wider range of stars, including stars with temperatures outside of the window where atmospheric parameters can be estimated with the current approaches. This is Paper I in a series of papers on the SSPP; it provides an overview of the SSPP, and initial tests of its performance using multiple data sets. Random and systematic errors are critically examined for the current version of the SSPP, which has been used for the sixth public data release of the SDSS (DR-6).

Molecular insights into the klotho-dependent, endocrine mode of action of fibroblast growth factor 19 subfamily members

Abstract: Unique among fibroblast growth factors (FGFs), FGF19, -21, and -23 act in an endocrine fashion to regulate energy, bile acid, glucose, lipid, phosphate, and vitamin D homeostasis. These FGFs require the presence of Klotho/betaKlotho in their target tissues. Here, we present the crystal structures of FGF19 alone and FGF23 in complex with sucrose octasulfate, a disaccharide chemically related to heparin. The conformation of the heparin-binding region between beta strands 10 and 12 in FGF19 and FGF23 diverges completely from the common conformation adopted by paracrine-acting FGFs. A cleft between this region and the beta1-beta2 loop, the other heparin-binding region, precludes direct interaction between heparin/heparan sulfate and backbone atoms of FGF19/23. This reduces the heparin-binding affinity of these ligands and confers endocrine function. Klotho/betaKlotho have evolved as a compensatory mechanism for the poor ability of heparin/heparan sulfate to promote binding of FGF19, -21, and -23 to their cognate receptors.

Potential Applications of Carbon Nanotubes

Abstract: This review explores the state-of-the-art applications of various kindsof carbon nanotubes. We will address the uniqueness of nanotubes thatmakes them better than their competitors for specific applications. We willdiscuss several examples of the already existing commercial uses of nanotubesand then point out feasible nanotube applications for the near term (withinten years) and the long term (beyond ten years). In our discussions of theapplications, we will distinguish between the various kinds of nanotubesin play today, ranging from multiwall nanotubes having different degreesof perfection to the near-perfect molecular single-wall nanotubes. The lastdecade of research in this field points to several possible applications forthese materials; electronic devices and interconnects, field emission devices,electrochemical devices, such as supercapacitors and batteries, nanoscale sensors,electromechanical actuators, separation membranes, filled polymer composites,and drug-delivery systems are some of the possible applications that havebeen demonstrated in the laboratories. We further discuss the status of thisfield and point out the value-added applications that exist today versus therevolutionary applications that will ensue in the distant future. The opportunities,challenges and the major bottlenecks, including large-scale manufacturing fornanotube material, will be identified as we define the applications space fornanotubes. We will also consider some of the recent concerns regarding health,environment as well as handling and safety protocols for carbon nanotubes.

Terahertz Spectroscopy and Imaging for Defense and Security Applications

Abstract: Terahertz (THz) radiation, which occupies a relatively unexplored portion of the electromagnetic spectrum between the mid-infrared and microwave bands, offers innovative sensing and imaging technologies that can provide information unavailable through conventional methods such as microwave and X-ray techniques. With the advancement of THz technologies, THz sensing and imaging will impact a broad range of interdisciplinary fields, including chemical and biological detections and identifications. In particular, THz radiation offers the opportunity for transformational advances in defense and security. Recent work shows that THz technologies are promising for the standoff detection and identification of explosive targets.

Behavioral and cognitive factors in entrepreneurship: entrepreneurs as the active element in new venture creation

Abstract: Entrepreneurs play a central role in new venture creation. Because they do, careful attention to relevant aspects of their behavior and cognition can offer useful insights into key aspects of this complex process. Specifically, investigation of carefully selected behavioral and cognitive factors can add appreciably to our understanding of the basic processes that underlie new venture creation (e.g., how opportunity recognition or creation actually occurs, how and what entrepreneurs learn from increasing experience in launching and operating new ventures). Evidence is reviewed concerning the role of behavioral and cognitive factors in several key activities performed by entrepreneurs. In addition, the potential role of a variable that has not yet been systematically investigated in the context of new venture creation—affect—is explored. Finally, suggestions are offered for future research designed to further explicate the role of behavioral and cognitive factors in new venture creation (e.g., research on the role in entrepreneurship of self-regulatory and metacognitive mechanisms; research on the cognitive and foundations of entrepreneurial alertness). Copyright © 2007 Strategic Management Society.

Molecular dynamics simulations suggest a mechanism for translocation of the HIV-1 TAT peptide across lipid membranes

Abstract: The recombinant HIV-1 Tat protein contains a small region corresponding to residues 47YGRKKRRQRR57R, which is capable of translocating cargoes of different molecular sizes, such as proteins, DNA, RNA, or drugs, across the cell membrane in an apparently energy-independent manner. The pathway that these peptides follow for entry into the cell has been the subject of strong controversy for the last decade. This peptide is highly basic and hydrophilic. Therefore, a central question that any candidate mechanism has to answer is how this highly hydrophilic peptide is able to cross the hydrophobic barrier imposed by the cell membrane. We propose a mechanism for the spontaneous translocation of the Tat peptides across a lipid membrane. This mechanism involves strong interactions between the Tat peptides and the phosphate groups on both sides of the lipid bilayer, the insertion of charged side chains that nucleate the formation of a transient pore, followed by the translocation of the Tat peptides by diffusing on the pore surface. This mechanism explains how key ingredients, such as the cooperativity among the peptides, the large positive charge, and specifically the arginine amino acids, contribute to the uptake. The proposed mechanism also illustrates the importance of membrane fluctuations. Indeed, mechanisms that involve large fluctuations of the membrane structure, such as transient pores and the insertion of charged amino acid side chains, may be common and perhaps central to the functions of many membrane protein functions.

Facial Action Unit Recognition by Exploiting Their Dynamic and Semantic Relationships

Abstract: A system that could automatically analyze the facial actions in real time has applications in a wide range of different fields. However, developing such a system is always challenging due to the richness, ambiguity, and dynamic nature of facial actions. Although a number of research groups attempt to recognize facial action units (AUs) by improving either the facial feature extraction techniques or the AU classification techniques, these methods often recognize AUs or certain AU combinations individually and statically, ignoring the semantic relationships among AUs and the dynamics of AUs. Hence, these approaches cannot always recognize AUs reliably, robustly, and consistently. In this paper, we propose a novel approach that systematically accounts for the relationships among AUs and their temporal evolutions for AU recognition. Specifically, we use a dynamic Bayesian network (DBN) to model the relationships among different AUs. The DBN provides a coherent and unified hierarchical probabilistic framework to represent probabilistic relationships among various AUs and to account for the temporal changes in facial action development. Within our system, robust computer vision techniques are used to obtain AU measurements. Such AU measurements are then applied as evidence to the DBN for inferring various AUs. The experiments show that the integration of AU relationships and AU dynamics with AU measurements yields significant improvement of AU recognition, especially for spontaneous facial expressions and under more realistic environment including illumination variation, face pose variation, and occlusion.

A First Course in Finite Elements

Abstract: Developed from the authors, combined total of 50 years undergraduate and graduate teaching experience, this book presents the finite element method formulated as a general-purpose numerical procedure for solving engineering problems governed by partial differential equations. Focusing on the formulation and application of the finite element method through the integration of finite element theory, code development, and software application, the book is both introductory and self-contained, as well as being a hands-on experience for any student. This authoritative text on Finite Elements: Adopts a generic approach to the subject, and is not application specific In conjunction with a web-based chapter, it integrates code development, theory, and application in one book Provides an accompanying Web site that includes ABAQUS Student Edition, Matlab data and programs, and instructor resources Contains a comprehensive set of homework problems at the end of each chapter Produces a practical, meaningful course for both lecturers, planning a finite element module, and for students using the text in private study. Accompanied by a book companion website housing supplementary material that can be found at http://www.wileyeurope.com/college/Fish A First Course in Finite Elements is the ideal practical introductory course for junior and senior undergraduate students from a variety of science and engineering disciplines. The accompanying advanced topics at the end of each chapter also make it suitable for courses at graduate level, as well as for practitioners who need to attain or refresh their knowledge of finite elements through private study.

Combinatorial design of key distribution mechanisms for wireless sensor networks

Abstract: Secure communications in wireless sensor networks operating under adversarial conditions require providing pairwise (symmetric) keys to sensor nodes. In large scale deployment scenarios, there is no priory knowledge of post deployment network configuration since nodes may be randomly scattered over a hostile territory. Thus, shared keys must be distributed before deployment to provide each node a key-chain. For large sensor networks it is infeasible to store a unique key for all other nodes in the key-chain of a sensor node. Consequently, for secure communication either two nodes have a key in common in their key-chains and they have a wireless link between them, or there is a path, called key-path, among these two nodes where each pair of neighboring nodes on this path have a key in common. Length of the key-path is the key factor for efficiency of the design. This paper presents novel deterministic and hybrid approaches based on Combinatorial Design for deciding how many and which keys to assign to each key-chain before the sensor network deployment. In particular, Balanced Incomplete Block Designs (BIBD) and Generalized Quadrangles (GQ) are mapped to obtain efficient key distribution schemes. Performance and security properties of the proposed schemes are studied both analytically and computationally. Comparison to related work shows that the combinatorial approach produces better connectivity with smaller key-chain sizes.

Robust key generation from signal envelopes in wireless networks

Abstract: The broadcast nature of a wireless link provides a natural eavesdropping and intervention capability to an adversary. Thus, securing a wireless link is essential to the security of a wireless network, and key generation algorithms are necessary for securing wireless links. However, traditional key agreement algorithms can be very costly in many settings, e.g. in wireless ad-hoc networks, since they consume scarce resources such as bandwidth and battery power.Traditional key agreement algorithms are not suitable for wireless ad-hoc networks since they consume scarce resources such as bandwidth and battery power.This paper presents a novel approach that couples the physical layer characteristics of wireless networks with key generation algorithms. It is based on the wireless communication phenomenon known as the principle of reciprocity which states that in the absence of interference both transmitter and receiver experience the same signal envelope. The key-observation here is that the signal envelope information can provide to the two transceivers two correlated random sources that provide sufficient amounts of entropy which can be used to extract a cryptographic key. In contrast, it is virtually impossible for a third party, which is not located at one of the transceiver's position, to obtain or predict the exact envelope; thus retrieve the key. Since in the presence of interference strict reciprocity property can not be maintained; our methodology is based on detecting deep fades to extract correlated bitstrings. In particular, we show how a pair of transceivers can reconcile such bitstrings and finally flatten their distribution to reach key agreement. In our constructions we use cryptographic tools related to randomness extraction and information reconciliation. We introduce "secure fuzzy information reconciliators" a tool that enables us to describe robust key generation systems in our setting. Finally we provide a computational study that presents a simulation of a wireless channel that demonstrates the feasibility of our approach and justifies the assumptions made in our analysis.

Fault locking, block rotation and crustal deformation in the Pacific Northwest

Abstract: SUMMARY We interpret Global Positioning System (GPS) measurements in the northwestern United States and adjacent parts of western Canada to describe relative motions of crustal blocks, locking on faults and permanent deformation associated with convergence between the Juan de Fuca and North American plates. To estimate angular velocities of the oceanic Juan de Fuca and Explorer plates and several continental crustal blocks, we invert the GPS velocities together with seafloor spreading rates, earthquake slip vector azimuths and fault slip azimuths and rates. We also determine the degree to which faults are either creeping aseismically or, alternatively, locked on the block-bounding faults. The Cascadia subduction thrust is locked mainly offshore, except in central Oregon, where locking extends inland. Most of Oregon and southwest Washington rotate clockwise relative to North America at rates of 0.4–1.0 ° Myr–1. No shear or extension along the Cascades volcanic arc has occurred at the mm/yr level during the past decade, suggesting that the shear deformation extending northward from the Walker Lane and eastern California shear zone south of Oregon is largely accommodated by block rotation in Oregon. The general agreement of vertical axis rotation rates derived from GPS velocities with those estimated from palaeomagnetic declination anomalies suggests that the rotations have been relatively steady for 10–15 Ma. Additional permanent dextral shear is indicated within the Oregon Coast Range near the coast. Block rotations in the Pacific Northwest do not result in net westward flux of crustal material—the crust is simply spinning and not escaping. On Vancouver Island, where the convergence obliquity is less than in Oregon and Washington, the contractional strain at the coast is more aligned with Juan de Fuca—North America motion. GPS velocities are fit significantly better when Vancouver Island and the southern Coast Mountains move relative to North America in a block-like fashion. The relative motions of the Oregon, western Washington and Vancouver Island crustal blocks indicate that the rate of permanent shortening, the type that causes upper plate earthquakes, across the Puget Sound region is 4.4 ± 0.3 mm yr–1. This shortening is likely distributed over several faults but GPS data alone cannot determine the partitioning of slip on them. The transition from predominantly shear deformation within the continent south of the Mendocino Triple Junction to predominantly block rotations north of it is similar to changes in tectonic style at other transitions from shear to subduction. This similarity suggests that crustal block rotations are enhanced in the vicinity of subduction zones possibly due to lower resisting stress.

A Comparative Study of Local Matching Approach for Face Recognition

Abstract: In contrast to holistic methods, local matching methods extract facial features from different levels of locality and quantify them precisely. To determine how they can be best used for face recognition, we conducted a comprehensive comparative study at each step of the local matching process. The conclusions from our experiments include: (1) additional evidence that Gabor features are effective local feature representations and are robust to illumination changes; (2) discrimination based only on a small portion of the face area is surprisingly good; (3) the configuration of facial components does contain rich discriminating information and comparing corresponding local regions utilizes shape features more effectively than comparing corresponding facial components; (4) spatial multiresolution analysis leads to better classification performance; (5) combining local regions with Borda count classifier combination method alleviates the curse of dimensionality. We implemented a complete face recognition system by integrating the best option of each step. Without training, illumination compensation and without any parameter tuning, it achieves superior performance on every category of the FERET test: near perfect classification accuracy (99.5%) on pictures taken on the same day regardless of indoor illumination variations, and significantly better than any other reported performance on pictures taken several days to more than a year apart. The most significant experiments were repeated on the AR database, with similar results.