Technical University of Dortmund

About: Technical University of Dortmund is a education organization based out in Dortmund, Nordrhein-Westfalen, Germany. It is known for research contribution in the topics: Large Hadron Collider & Neutrino. The organization has 13028 authors who have published 27666 publications receiving 615557 citations. The organization is also known as: Dortmund University & University of Dortmund.

Fatigue Performance of Laser Additive Manufactured Ti–6Al–4V in Very High Cycle Fatigue Regime up to 109 Cycles

Abstract: Additive manufacturing technologies are in the process of establishing themselves as an alternative production technology to conventional manufacturing such as casting or milling. Especially laser additive manufacturing (LAM) enables the production of metallic parts with mechanical properties comparable to conventionally manufactured components. Due to the high geometrical freedom in LAM the technology enables the production of ultra-light weight designs and therefore gains increasing importance in aircraft and space industry. The high quality standards of these industries demand predictability of material properties for static and dynamic load cases. However, fatigue properties especially in the very high cycle fatigue regime until 109 cycles have not been sufficiently determined yet. Therefore this paper presents an analysis of fatigue properties of laser additive manufactured Ti-6Al-4V under cyclic tension-tension until 107 cycles and tension-compression load until 109 cycles. For the analysis of laser additive manufactured titanium alloy Ti-6Al-4V Woehler fatigue tests under tension-tension and tension-compression were carried out in the high cycle and very high cycle fatigue regime. Specimens in stress-relieved as well as hot-isostatic-pressed conditions were analyzed regarding crack initiation site, mean stress sensitivity and overall fatigue performance. The determined fatigue properties show values in the range of conventionally manufactured Ti-6Al-4V with particularly good performance for hot-isostatic-pressed additive-manufactured material. For all conditions the results show no conventional fatigue limit but a constant increase in fatigue life with decreasing loads. No effects of test frequency on life span could be determined. However, independently of testing principle, a shift of crack initiation from surface to internal initiation could be observed with increasing cycles to failure.

Multiobjective exploration of the StarCraft map space

Abstract: This paper presents a search-based method for generating maps for the popular real-time strategy (RTS) game StarCraft. We devise a representation of StarCraft maps suitable for evolutionary search, along with a set of fitness functions based on predicted entertainment value of those maps, as derived from theories of player experience. A multiobjective evolutionary algorithm is then used to evolve complete StarCraft maps based on the representation and selected fitness functions. The output of this algorithm is a Pareto front approximation visualizing the tradeoff between the several fitness functions used, and where each point on the front represents a viable map. We argue that this method is useful for both automatic and machine-assisted map generation, and in particular that the Pareto fronts are excellent design support tools for human map designers.

The mami source of polarized electrons

Abstract: The present work describes the source of polarized electrons that is run at the 855 MeV race track microtron MAMI at the Johannes Gutenberg Universitat in Mainz. The source is based on photoelectron emission from (III–V)-semiconductors. Presently strained layer InGaP- or GaAsP-cathodes are used, which are processed to negative electron affinity by coverage of the surface with a submonolayer of caesium and oxygen. Electron beams spin-polarized up to a degree of P = 55% at a quantum efficiency of QE = 2% or P = 75% at QE = 0.4%, respectively, are obtained. The well-known but hitherto unsolved problem of limited cathode lifetime has been sidestepped by the attachment of an UHV load lock system to the source electron gun. It allows quick replacement of cathodes without breaking the gun vacuum. Availabilities in excess of 85% are obtained regularly in beamtimes longer than 100h. The source was mainly applied in measurements of nucleon form factors via the reactions 1H(ē, e′ p), 2D(ē, e′ p), 2D(ē, e′ n), and 3He(ē, e′ n). More than 1600 h beamtime have been accomplished in physics experiments with polarized electron beams at MAMI up to now.