Universiti Teknologi Malaysia

About: Universiti Teknologi Malaysia is a education organization based out in Johor Bahru, Malaysia. It is known for research contribution in the topics: Membrane & Control theory. The organization has 21644 authors who have published 39500 publications receiving 520635 citations.

Design of Phased Arrays of Series-Fed Patch Antennas With Reduced Number of the Controllers for 28-GHz mm-Wave Applications

Abstract: New modified 2 × 2 and 3 × 3 series-fed patch antenna arrays with beam-steering capability are designed and fabricated for 28-GHz millimeter-wave applications. In the designs, the patches are connected to each other continuously and in symmetric 2-D format using the high-impedance microstrip lines. In the first design, 3-D beam-scanning range of ± 25° and good radiation and impedance characteristics were attained by using only one phase shifter. In the second one, a new mechanism is introduced to reduce the number of the feed ports and the related phase shifters (from default number 2 N to the reduced number N + 1 in the serial feed (here N = 3) and then the cost, complexity, and size of the design. Here, good scanning performance of a range of ± 20°, acceptable sidelobe level, and gain of 15.6 dB are obtained. These features allow to use additional integrated circuits to improve the gain and performance. A comparison to the conventional array without modification is done. The measured and simulated results and discussions are presented.

Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: A review

Abstract: A coherent review on the advanced proton exchange membranes (PEMs) for direct methanol fuel cell (DMFC) application and the future direction in the development of a high performance polymeric membrane for DMFC were discussed in this paper. PEMs have a profound influence on performance of DMFC. The PEMs are categorized into five groups which are partially fluorinated, perfluorinated ionomers, acid–base complexes, non-fluorinated ionomers, hydro carbon and aromatic polymers. Many researchers have investigated the functionalization methods on the PEMs to solve methanol crossover problem while obtaining low electronic conductivity, high proton conductivity, low electro osmotic drag coefficient, high mechanical properties and good chemical and thermal stability. Including in this review, fabrication of PEM using electrospinning process coupled with the promising functionalized polymeric materials which were known to be the most important initiatives at present in order to further expand the full potential of DMFC performance.