Wuhan University of Technology

About: Wuhan University of Technology is a education organization based out in Wuhan, China. It is known for research contribution in the topics: Microstructure & Photocatalysis. The organization has 40384 authors who have published 36724 publications receiving 575695 citations. The organization is also known as: WUT.

Enhanced Photocatalytic CO2-Reduction Activity of Anatase TiO2 by Coexposed {001} and {101} Facets

Abstract: Control of TiO2 crystal facets has attracted enormous interest due to the fascinating shape-dependent photocatalytic activity of this material. In this work, the effect of the ratio of {001} and {101} facets on the photocatalytic CO2-reduction performance of anatase TiO2 is reported. A new “surface heterojunction” concept is proposed on the basis of the density functional theory (DFT) calculations to explain the difference in the photocatalytic activity of TiO2 with coexposed {001} and {101} facets.

Engineering heterogeneous semiconductors for solar water splitting

Abstract: There is a growing interest in the conversion of water and solar energy into clean and renewable H2 fuels using earth-abundant materials due to the depletion of fossil fuel and its serious environmental impact. This critical review highlights some key factors influencing the efficiency of heterogeneous semiconductors for solar water splitting (i.e. improved charge separation and transfer, promoted optical absorption, optimized band gap position, lowered cost and toxicity, and enhanced stability and water splitting kinetics). Moreover, different engineering strategies, such as band structure engineering, micro/nano engineering, bionic engineering, co-catalyst engineering, surface/interface engineering of heterogeneous semiconductors are summarized and discussed thoroughly. The synergistic effects of the different engineering strategies, especially for the combination of co-catalyst loading and other strategies seem to be more promising for the development of highly efficient photocatalysts. A thorough understanding of electron and hole transfer thermodynamics and kinetics at the fundamental level is also important for elucidating the key efficiency-limiting step and designing highly efficient solar-to-fuel conversion systems. In this review, we provide not only a summary of the recent progress in the different engineering strategies of heterogeneous semiconductors for solar water splitting, but also some potential opportunities for designing and optimizing solar cells, photocatalysts for the reduction of CO2 and pollutant degradation, and electrocatalysts for water splitting.

Ultrathin 2D/2D WO3/g-C3N4 step-scheme H2-production photocatalyst

Abstract: The appropriate interfacial contact of heterojunction photocatalysts plays a critical role in transfer/separation of interfacial charge carriers. Design of two-dimensional (2D)/2D surface-to-surface heterojunction is an effective method for improving photocatalytic activity since greater contact area can enhance interfacial charge transfer rate. Herein, ultrathin 2D/2D WO3/g-C3N4 step-like composite heterojunction photocatalysts were fabricated by electrostatic self-assembly of ultrathin tungsten trioxide (WO3) and graphitic carbon nitride (g-C3N4) nanosheets. The ultrathin WO3 and g-C3N4 nanosheets were obtained by electrostatic-assisted ultrasonic exfoliation of bulk WO3 and a two-step thermal-etching of bulk g-C3N4, respectively. The thickness of ultrathin WO3 and g-C3N4 nanosheets are 2.5–3.5 nm, which is equivalent to 5–8 atomic or molecular layer thickness. This ultrathin layered heterojunction structure can enhance surface photocatalytic rate because photogenerated electrons and holes at heterogeneous interface more easily transfer to surface of photocatalysts. Therefore, the obtained ultrathin 2D/2D WO3/g-C3N4 step-scheme (S-scheme) heterojunction photocatalysts exhibited better H2-production activity than pure g-C3N4 and WO3 with the same loading amount of Pt as cocatalyst. The mechanism and driving force of charge transfer and separation in S-scheme heterojunction photocatalysts are investigated and discussed. This investigation will provide new insight about designing and constructing novel S-scheme heterojunction photocatalysts.

Cocatalysts for Selective Photoreduction of CO2 into Solar Fuels.

Abstract: Photoreduction of CO2 into sustainable and green solar fuels is generally believed to be an appealing solution to simultaneously overcome both environmental problems and energy crisis. The low selectivity of challenging multi-electron CO2 photoreduction reactions makes it one of the holy grails in heterogeneous photocatalysis. This Review highlights the important roles of cocatalysts in selective photocatalytic CO2 reduction into solar fuels using semiconductor catalysts. A special emphasis in this review is placed on the key role, design considerations and modification strategies of cocatalysts for CO2 photoreduction. Various cocatalysts, such as the biomimetic, metal-based, metal-free, and multifunctional ones, and their selectivity for CO2 photoreduction are summarized and discussed, along with the recent advances in this area. This Review provides useful information for the design of highly selective cocatalysts for photo(electro)reduction and electroreduction of CO2 and complements the existing reviews on various semiconductor photocatalysts.

Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries

Abstract: Lithium-sulfur (Li-S) batteries with high energy density and long cycle life are considered to be one of the most promising next-generation energy-storage systems beyond routine lithium-ion batteries. Various approaches have been proposed to break down technical barriers in Li-S battery systems. The use of nanostructured metal oxides and sulfides for high sulfur utilization and long life span of Li-S batteries is reviewed here. The relationships between the intrinsic properties of metal oxide/sulfide hosts and electrochemical performances of Li-S batteries are discussed. Nanostructured metal oxides/sulfides hosts used in solid sulfur cathodes, separators/interlayers, lithium-metal-anode protection, and lithium polysulfides batteries are discussed respectively. Prospects for the future developments of Li-S batteries with nanostructured metal oxides/sulfides are also discussed.