Institution
Xuzhou Institute of Technology
Education•Xuzhou, China•
About: Xuzhou Institute of Technology is a education organization based out in Xuzhou, China. It is known for research contribution in the topics: Catalysis & Computer science. The organization has 1696 authors who have published 1521 publications receiving 13541 citations.
Topics: Catalysis, Computer science, Adsorption, Microstructure, Coal mining
Papers published on a yearly basis
Papers
More filters
•
TL;DR: Aim at solving the strong nonlinear control problem, a multi-step predictive control method is proposed, which uses a RBF neural network as a model and the stability of the system is proved.
Abstract: Aim at solving the strong nonlinear control problem,a multi-step predictive control method is proposed,which uses a RBF neural network as a model.A multi-step predictive model is constructed,a Jacobian matrix computing method for predictive error about control sequence is given,a receding horizon optimization policy is designed by using L-M algorithm,feedback correction is achieved by modifying reference input according the error,and the stability of the system is proved.Simulation results of the control method validate desirable performances.
4 citations
••
TL;DR: In this paper, a multiview ghost-free image enhancement strategy for in-the-wild images with unknown exposure and geometry is proposed to solve the complex geometric alignment problem for a wide variational baseline among multiple sparsely arranged cameras.
Abstract: The multiview low dynamic range images captured with sparse camera arrangement under ill-lighting conditions contain highlighted and shadow regions due to over-exposed and under-exposed regions The processing of these images produces contrast distortion, and it is challenging to maintain relative brightness with color consistency Moreover, the disparity map estimation faces the challenges of holes and artifacts due to a wide baseline and poor visibility, with a shared view of vision In this article, we propose a multiview ghost-free image enhancement strategy for in-the-wild images with unknown exposure and geometry We address the complex geometric alignment problem for a wide variational baseline among multiple sparsely arranged cameras The features among multiple viewpoints are detected and matched for the image restoration The restored image contains highlighted and shadow regions with a color imbalance problem We synthesize virtual images following the intensity mapping function, which compensates for the relative brightness and color distortions Finally, we fuse all the images to obtain high-quality images The proposed method is more frequent and feasible for future multiview systems with varying baselines without relying on disparity maps The experimental results demonstrate that the proposed method outperformed the state-of-the-art approaches
4 citations
••
TL;DR: In this article, the energy levels of M-shell excited states in Al-like through Cl-like W ions from the MCDF method were compared with some available theoretical and experimental results, and good agreement with them was achieved.
Abstract: Wavelengths, transition probabilities, and oscillator strengths have been calculated for M-shell electric dipole (E1) transitions in Al-like W61+ through Cl-like W57+, with partially filled 3p subshell. The fully relativistic multiconfiguration Dirac–Fock (MCDF) method, taking quantum electrodynamical effect and Breit correction into account, was used in the calculations. Calculated energy levels of M-shell excited states in Al-like through Cl-like W ions from the method were compared with some available theoretical and experimental results, and good agreement with them was achieved.
4 citations
••
TL;DR: In this article, a broken rock water-sand seepage test device was developed, and rheological tests were conducted on multiple groups of broken rock samples with single-stage axial loading and different load levels.
Abstract: This study investigates water-sand bursting disasters associated with fractured rock that affect safe mining in the mining areas of Western China. A broken rock water-sand seepage rheological test device was developed, and rheological tests were conducted on multiple groups of broken rock samples with single-stage axial loading and different load levels. When the rheology of each group of broken rock samples was stable, water-sand mixed fluid was injected into the samples at a certain pressure gradient to conduct water-sand seepage tests on broken rock masses. It was found that when the porosity of a fractured rock mass is within a certain range, the water-sand mixed fluid does not completely pass through the fractured rock mass and some sand particles are filtered by the fractured rock sample. There is an exponential relationship between the sand breaking ability and the sand filtration ability of fractured rock and its initial porosity, and the permeability of fractured rock decreases by a certain extent after sand filtration. However, for different load levels, when the flow through a fractured rock mass tends to be stable, the final porosity of the fractured rock mass decreases exponentially with axial compression. Based on the classical Kelvin rheological model and the basic theory of fractional calculus, a new fractional rheological model has been proposed and the rheological parameters under different load levels were fitted to the model. The new fractional rheological model is better able to describe the rheological characteristics of broken mudstone.
4 citations
••
TL;DR: In this article, the authors investigated the thermal expansion characteristics of coaly mudstone specimens at temperatures ranging from room temperature up to 800 °C and found that the relationship curve between thermal expansion strain and testing time could be divided into three stages.
Abstract: This study investigated the thermal expansion characteristics of coaly mudstone specimens at temperatures ranging from room temperature up to 800 °C. The experiments were performed by an MTS810 electro-hydraulic servo system and an MTS653.02 high-temperature furnace. Results revealed that mudstone experienced thermal expansion at high temperature, and that the relationship curve between thermal expansion strain and testing time could be divided into three stages. With increasing temperature, mudstone’s thermal strain and expansion coefficient exhibited an upward trend. With 400 °C as the critical temperature, the curve could be divided into (1) rapid increase stage, (2) flat stage, and (3) rapid increase stage. The major causes behind thermal expansion are changes in internal pores and fissure, as well as the thermochemistry effect of mineral components.
4 citations
Authors
Showing all 1711 results
Name | H-index | Papers | Citations |
---|---|---|---|
Peng Wang | 108 | 1672 | 54529 |
Qiong Wu | 51 | 316 | 12933 |
Wenping Cao | 34 | 176 | 4093 |
Bin Hu | 30 | 213 | 3121 |
Syed Abdul Rehman Khan | 29 | 131 | 2733 |
Jingui Duan | 29 | 93 | 3807 |
Vivian C.H. Wu | 25 | 105 | 2566 |
Lei Chen | 16 | 99 | 1062 |
Chao Wang | 16 | 74 | 741 |
Wenbin Gong | 16 | 27 | 953 |
Jing Li | 16 | 40 | 1025 |
Chao Liu | 15 | 43 | 737 |
Qinglin Wang | 14 | 72 | 595 |
Yaocheng Zhang | 14 | 54 | 566 |
Chao Wang | 13 | 25 | 774 |